Sampling Systems Equipment For Monitoring And Testing Available In Singapore
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
The Gasmet portable sampling system has been designed for portable emission monitoring measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are all located in a module that is heated to 180 ºC. From the Sampling System the gases ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-1E portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-1 portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
Flow Directors are designed to transform SenseAir K30 and K33 model sensors from diffusion to sample draw sensors. The tube cap kit attaches directly to the top of the sensor with self-tapping ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
GT6000 Mobilis — a complete emission monitoring system packed into a sturdy, portable device. Combining portability with high performance, the GT6000 Mobilis is a revolutionary emission monitoring system that can streamline measurement processes and save you a whole lot of time and effort, be it in a stack, a lab, or on the field. We designed the GT6000 Mobilis so that the setup, measurements, ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet portable calibrator is one of the most important tools in generating new applications for the Gasmet FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless-steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen gas flow, thus producing a continuous flow of a known concentration ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-118-RP portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-118E-RP portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-EDL-500-10Li is a powerful portable DC powered air sampling system operable from (1) line power (2) a 10 Ah Li-ion battery or (3) an optional 24VDC external power source. This powerful unit is a low volume air sampler enclosed in a solid wall, strong, water tight enclosure. It has double throw latches for easy access with three comfortable rubber over-molded handles ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and has worked with a leading industry partner to improve the quality of natural gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran Model 2641 Portable Mercury Sampler paired with a Tekran Model 2600- NG Mercury Analyzer provides a complete ...
-
Manufactured by GMP Sampling | FOSBA GmbHbased in GERMANY
Auger sampler type PS 05 Similar to the enclosed project sketch, for sampling from a downpipe, bunker, silo, chute or similar. The sampler is switched to discard immediately before sampling in order to expel the material in the pipe at the end of the pipe. The material that now flows in is conveyed to the sample outlet by changing the direction of rotation of the screw. The sample quantity can be ...
-
Manufactured by AMA Instruments GmbHbased in GERMANY
AMA Instruments offers a wide range of portable and automated sampling units performing high precision air and gas sampling. The sampling units are primarily used for indoor air monitoring, occupational health and safety monitoring or observation of legally required limits in industry or environment. While sampling an exactly defined air or gas volume will be drawn through special adsorption ...
-
Manufactured by GMP Sampling | FOSBA GmbHbased in GERMANY
The sampling systems allow continuous, representative and reproducible sampling of any quantity of accumulating, slipping or free-falling solids with particle ...
-
Manufactured by Mirmorax ASbased in NORWAY
The Mirmorax In-line Multiphase Sampling System provides the operator with a sample that, independent of flow regime and compositional mix, is a true volumetric representation of the ...
-
Manufactured by AMS Analiticabased in ITALY
PM10-2,5 sampling adding the Wins impactor. The PM10 and PM2,5 US EPA sampling inlet is a part of a new field portable sampling system combined with a constant flow rate AirCube Sampler. The PM inlet are manufactured in fully compliance with US EPA requirements available in the reference method. Fully manufactured in anodized aluminum for outdoor applications and available optionally with the ...
-
Manufactured by Research International, Inc.based in USA
The SASS 3100 is a compact, rugged microprocessor-controlled portable air sampler designed for use with state-of-the-art electret filter media. It is highly suited to the collection of biological and radioactive aerosols. In independent tests performed by third parties, it has out-performed all competitors in terms of collection efficiency and ...
-
Manufactured by DOD Technologies Incbased in USA
The IsoSense is a portable and economical sampling device ideal for measuring vapor and aerosol levels of isocyanate compounds down to 1 ppb. Specially designed for personal exposure evaluations, area surveys, and emergency ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HORIBA permeation dryer PS-100E is designed as a compact and portable sample gas conditioning system in combination with the multi-component gas analyzer ...
-
Manufactured by TCR-Tecorabased in ITALY
EasyGas Plus is a constant flow sampler, compact with high performance, light and cheap. EasyGas PLUS sampler completes TCR Tecora product range for gaseous compounds sampling and fulfills to the normative regarding CEN/TS 13649:14 “Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal ...
-
Manufactured by Shaw Moisture Metersbased in UNITED KINGDOM
A portable sample system manufactured in the UK by Shaw Moisture Meters, for the range of SDHmini dew point hygrometers. An effective sampling system, which ensures the sample pressure and flow are suitable for quick and accurate dew point measurements in gases and dry compressed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you