Sampling Train Equipment For Monitoring And Testing Available In Micronesia
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG provides a complete sampling and analysis ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Insert this Tandem Cartridge Holder between the sections of any combination holder to create a multi cartridge sampling ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm filter. The PM10 cyclone collects particulate matter ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
EPA Method 4 is used to determine the moisture content of stack gases. A gas sample is extracted at a constant rate from the source. Moisture is then removed from the sample stream and the condensate is measured either by volume or by ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments PFAS Sampling System is based on the EPA Other Test Method 45 (OTM-45) and Other Test Method 50 (OTM-50) for the isokinetic collection of PFAS from stationary sources. PFAS stands for per- and polyfluoroalkyl chemicals, which are found in a wide range of consumer products and facilities. PFAS can accumulate in the body and may lead to adverse health effects. Gaseous and ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M. Engineering HFID Model 5-100 is a compact 19" rack mount or table top heated total hydrocarbon analyzer for high accuracy, sensitivity and stability for pressurized samples with conventional sample back pressure ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2030 Heated Cartridge Sampler allows gold coated sampling cartridges to be heated while they are exposed to a variety of gaseous sample matrices (i.e. ambient air, natural gas, or process gases). The performance of gold adsorbent cartridges is greatly enhanced if the cartridges are heated during exposure. This virtually eliminates problems with condensation of passivation of the ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112WP is the wall or panel mount version of our time proven VE112 heated sample filter and interface. Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal sample filter is cleaned, but also the heated ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2600-IO5 system provides a manual approach to ambient air analysis or other non-flammable gasses. Samples are collected onto gold-coated quartz traps, and then analyzed on the 2600-IO5 instrument to determine Hg content. The Tekran Model 2600-IO5 Mercury Analyzer is designed for the analysis of ambient air sampling cartridges. The system contains an atomic fluorescence detector, a dual ...
-
Manufactured by Environmental Supply Company, Inc. (ESC)based in USA
The M6-S1 Method 6 Sampling Train is an efficient low flow, non-isokinetic system for extracting a gas sample from the stack and separating the sulfuric acid mist, including sulfur trioxide, from the sulfur dioxide fraction that is to be measured using barium-thorin titration. The UNI-VOS-ACD sampling console is the preferred console, sold separtely, for use with this train. (click on image to ...
-
Manufactured by Aer Sampling Inc.based in USA
For use if a filter has to go in between impingers in the condensing ...
-
Manufactured by N-Con Systems Company, Inc.based in USA
Compact to minimize splash area. Prompt opening and closing of sample container. Does not “hunt” under marginal precipitation conditions. Reliable, heavy duty cover drive motor. Easy ...
-
Manufactured by Metlab Miljö ABbased in SWEDEN
The STL Gas Sampler is used for manual wet chemical determination of gaseous pollutants such as HCl, HF, SO2, SO3, NH3, Hg and other metals according to European standard methods. The complete sampling system consists of 1) a heated gas sampling probe (EVA Light Gas Probe), 2) one or several parallel absorption bottle sampling trains and 3) one or several control units CU-1-10 (or ...
-
Manufactured by VayomTechbased in INDIA
VYOMTECH STACK MONITORING KIT VTSS1 is scientifically designed instrument. It can be used to measure total emission of Particulate Matter and Gaseous Pollutants from all types of industries including Thermal power stations, Steel Plants, Chemical Plants and Cement Industry. Our Stack Monitoring Kit VTSS1 can be used to take accurate representative samples of Particulate Matter and various ...
-
Manufactured by Geophysical Survey Systems, Inc., (GSSI)based in USA
The StructureScan Mini HR is GSSI’s all-in-one high-resolution GPR system for concrete inspection. With a 2600 MHz antenna, this handheld system locates rebar, conduits and post-tension cables in depths of up to 16 inches (40 cm). The StructureScan Mini HR is available in two models; 2D, for real-time target location and 3D, for an x-ray like image. Ideal for complex areas, the ...
-
Manufactured by Drop Enviro Engineers & Servicesbased in INDIA
Low Flow Air Sampler is an easy-to-carry around sampler for determining the concentration of toxins in ambient and workplace environments. HS 1 is a compact, light weight battery operated sampler which is is designed for determination of toxic pollutants such as SO2, NO2, Cl2, NH3, H2S etc. in ambient and workplace environments. The sampler employs wet chemical methodology for sampling the air ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you