Sampling Train Equipment For Monitoring And Testing Available In Sweden
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG provides a complete sampling and analysis ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
EPA Method 4 is used to determine the moisture content of stack gases. A gas sample is extracted at a constant rate from the source. Moisture is then removed from the sample stream and the condensate is measured either by volume or by ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments PFAS Sampling System is based on the EPA Other Test Method 45 (OTM-45) and Other Test Method 50 (OTM-50) for the isokinetic collection of PFAS from stationary sources. PFAS stands for per- and polyfluoroalkyl chemicals, which are found in a wide range of consumer products and facilities. PFAS can accumulate in the body and may lead to adverse health effects. Gaseous and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm filter. The PM10 cyclone collects particulate matter ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112WP is the wall or panel mount version of our time proven VE112 heated sample filter and interface. Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal sample filter is cleaned, but also the heated ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M. Engineering HFID Model 5-100 is a compact 19" rack mount or table top heated total hydrocarbon analyzer for high accuracy, sensitivity and stability for pressurized samples with conventional sample back pressure ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2600-IO5 system provides a manual approach to ambient air analysis or other non-flammable gasses. Samples are collected onto gold-coated quartz traps, and then analyzed on the 2600-IO5 instrument to determine Hg content. The Tekran Model 2600-IO5 Mercury Analyzer is designed for the analysis of ambient air sampling cartridges. The system contains an atomic fluorescence detector, a dual ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2030 Heated Cartridge Sampler allows gold coated sampling cartridges to be heated while they are exposed to a variety of gaseous sample matrices (i.e. ambient air, natural gas, or process gases). The performance of gold adsorbent cartridges is greatly enhanced if the cartridges are heated during exposure. This virtually eliminates problems with condensation of passivation of the ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Insert this Tandem Cartridge Holder between the sections of any combination holder to create a multi cartridge sampling ...
-
Manufactured by Prometec Tools Oybased in FINLAND
Automated Q-Robot sampler robot takes a reliable and representative sample of each incoming load quickly before unloading them from a train. The sampling works seamlessly with all kinds of crushed and solid materials. Q-Robot can also be integrated, for example, with the unloading device following the ...
-
Manufactured by Aer Sampling Inc.based in USA
A collection of seven different sized sampling nozzles in one kit. The point at which the sampling gas enters the sampling train and the part of the sampling train which enters the smoke-stack/chimney. Ideally, the sampled gas should have the same velocity as the flue gas inside the stack (Isokinetic sampling ratio = 100%). This means that the nozzle size you use is determined by the velocity of ...
-
Manufactured by Nutech Instruments Inc.based in USA
The cleanliness of the canister is very critical to the overall accuracy of the detection of VOCs in the sample. EPA Methods TO-14A and TO-15 require sampling devices be clean down to sub-ppbv level. The newly release EPA TO-15A dictates a much more strict requirement on the cleanliness of the canister than TO-15 published in 1999: from 0.2 ppbv at 30 psig to ≤0.020 ppbv (≤20 ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The Model 650 FID is a high-temperature flame ionization sensor that continuously measures total hydrocarbon concentrations. Industrial Design: Rugged industrial strength assembly suitable for continuous use in harsh environments. Direct Mount: Design eliminates heat-traced sample lines & allows the fastest response time. Fully Heated: To avoid condensation during sampling, the entire sensor ...
-
Manufactured by Alert Technology Ltdbased in UNITED KINGDOM
The ALERT PRO is the first and only product in the world to detect and distinguish airborne asbestos in real time. Designed to function in a range of environments, ALERT PRO detects all forms of asbestos and provides alarms and a timestamped dataset that helps efficiently manage asbestos ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 200deg;C - 392deg;F. The Model SNR674 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR674 to sample low oxygen and inert ...
-
Manufactured by Canberra - Mirion Technologies, Incbased in USA
The CANBERRA FoodScreen Radiological Food Screening System is a complete, transportable food analyzer for quickly determining whether raw or processed food has become contaminated from a radiological event. A sample is placed into the shield, a count is initiated and a final report is generated. The report lists activity or minimum detectible activity concentrations found in the sample for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you