Sampling Tube Equipment For Monitoring And Testing Available In Bolivia
-
PremiumManufactured by Labconco Corporationbased in USA
The RapidVap N2 Evaporation Systems offer a more efficient, automatic alternative to Kuderna-Danish and rotary evaporators and may be used with a broad range of aggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Innova 1314i is a highly accurate, reliable, and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic detection method. Extremely versatile by design, the 1314i can measure at trace levels almost any gas that absorbs infrared light. Multi-gas monitoring of up to five different gases (+ water vapor) can be measured with excellent sensitivity ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston rod with detachable handle for sample tube 1 ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Determination of the shear strength of a soil is a commonly used method to determine the structural strength of that soil. The electric vane tester is an excellent field instrument for in-situ measurement and evaluation of the undrained shear strength (su) and the remoulded shear strength. Furthermore it gives a good indication of the over-consolidation ratio, the stress-strain relationship and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
More samples per day. The KjelDigester K-446 / K-449 reduces the block digestion process by up to 2 hours and meets the highest safety requirements. The high degree of automation is the perfect match to the KjelMaster System allowing more samples per day to be ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CO2Meter Tube Cap Adapter accessory easily converts a wide range of gas sensors from diffusion applications to ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
K33 ELG 10,000ppm CO2 + RH/T Data Logging Sensor. The K33 ELG (environmental logger) is designed to log up to 10,000ppm (1%) carbon dioxide, temperature, and % relative humidity in ambient air. Because of its ultra-low power requirements, it can “wake up”, take a sample, store the data in memory, and go back to sleep. Using battery power only, the sensor can be placed in the field for ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment sampling applications such as RABS, Laminar Flow ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Mailing tube with end caps that holds two 4 oz. sample ...
-
PremiumManufactured by ODLABbased in SOUTH KOREA
The HG-1 is able to very easily induce to hydrogen compound as a mixing with NaBH,NaOH,acids and samples through Y type tubing. It is very intensity when the customer analyze Hg,As,Pb,Se,Bi,Sn,Sb and Ge in ICP. It has been analyzing ppb level with above elements. The ODLAB produced HG-1 in Korea and it makes cost down than conventional hydride generator and it can be attach to all type of ICP. It ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Kemmerer water sampler (vertical water bottle) is used for general water sampling in lakes, channels, wells and the sea. This sampler consists entirely out of plastic parts so that there is no risk of the sample coming into contact with metal. The Kemmerer water sampler holds 1.2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample tube, Ø 63x57mm, length 150 cm, pvc transparant, inclusive covers, set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push/pull handle. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes, the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you