SCADA Systems Equipment For Monitoring And Testing Available In Australasia
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Prevent high maintenance costs by monitoring and maintaining the right dew point in your system. Too much water in your system can lead to e.g. forming of rust, freezing of valves, and even product loss when the moist content is too high for your coating or paint process. Stay in control of your dew point with the VP Dew Point ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hybrid Flow Measurement with Surface Radar and Ultrasonic Profile Scanner. Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Our advanced Membrane Bioreactor (MBR) Containerized System efficiently treats 50m3/day of wastewater, ensuring top-quality treated water and minimal environmental impact through fully automated operation, remote monitoring via SCADA, and odor and sludge removal ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The Bright Technologies Belt Filter Press is a modern design that includes three (3) US Patents and many innovative features that provide high performance in a compact, high value package. Many competing products are based on old and inferior designs that do not utilize filtration area effectively. Our belt press is designed with long term value and ease of operation in mind. Stainless Steel ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
The Hycal Mini analyser provides rapid, accurate measurement of hydrogen dissolved in molten aluminium and its ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled ...
-
PremiumManufactured by Challenge Technologybased in USA
A computer controlled, automated, testing machine, for measuring bulk specific gravity of gyratory samples or field cores of ...
-
PremiumManufactured by Challenge Technologybased in USA
The ODM-100 Oxygen Demand Monitor is a portable unit for measuring real-time oxygen demand at any point in a wastewater treatment ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3 x lower running cost, reduced degassing cost. Capital expenditure: Less than 50% CapEx, PLC not included. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3x lower running cost, reduced degassing cost. Gateway: Profinet, ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and ...
-
PremiumManufactured by Fluence Corporationbased in USA
Wastewater characteristics change continuously, depending on rainfall, industrial processes, and even the time of day. Over-aerating is a common, expensive problem that results in excessive energy costs and unnecessary wear and tear on your ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Industrial control systems assure data integrity, process automation, simplicity of use, and data integration. The FacilityPro® Processor provides a central hub for an environmental monitoring system. The Processor communicates with cleanroom sensors, including particle and microbial monitors, while buffering data and checking tolerances for alarm activation. As a key component of industrial ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you