SCADA Systems Equipment For Monitoring And Testing Available In Latin America
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Industrial control systems assure data integrity, process automation, simplicity of use, and data integration. The FacilityPro® Processor provides a central hub for an environmental monitoring system. The Processor communicates with cleanroom sensors, including particle and microbial monitors, while buffering data and checking tolerances for alarm activation. As a key component of industrial ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI 20 Plus liquid particle counter from Particle Measuring Systems (PMS) provides groundbreaking capabilities for monitoring of the most demanding ultrapure water systems. Counting and sizing contaminants as small as 20 nm in combination with real-time statistical analysis enables efficient characterization of filtration systems and optimum process control. The thermal stabilization ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities. The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations. The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
The Hycal Mini analyser provides rapid, accurate measurement of hydrogen dissolved in molten aluminium and its ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3 x lower running cost, reduced degassing cost. Capital expenditure: Less than 50% CapEx, PLC not included. ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
Modular treatment units that fit into multi-ple wastewater solutions, e.g. sedimenta-tion -or mechanical pre-treatment and bio-sludge removal. The Saturn units are installed above ground to minimize civil work and are typical used for systems between ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Our advanced Membrane Bioreactor (MBR) Containerized System efficiently treats 50m3/day of wastewater, ensuring top-quality treated water and minimal environmental impact through fully automated operation, remote monitoring via SCADA, and odor and sludge removal ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
M425 rotary torque sensor with keyway shafts offers high accuracy of 0.1% and torque measurement range from 0-10Nm up to 60,000Nm as standard. It’s an inline rotation torque transducer, widely used for motor, gearbox and pump torque testing. Using a highly-accurate non-contact technique, the Datum M425 Rotary Torque Transducer and Torque Meter represent an ultimate torque sensor for anyone ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press dewatering systems that are skid or trailer mounted. We design and manufacture the skid equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and larvae. Ultrafiltration is also commonly use as a Reverse Osmosis plant pretreatment. Check Lenntech UF ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Contactless Torque Transducers with flange couplings at either end with measuring ranges from 0-100Nm up to 30kNm as standard (bespoke sensors up to 16MNm) for a variety of in line static and rotary torque measurement applications. The Datum Electronics Series FF425 non contact flange torque sensor and FF410 torque sensors have been designed to fit easily inline with any drive train or test ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Prevent high maintenance costs by monitoring and maintaining the right dew point in your system. Too much water in your system can lead to e.g. forming of rust, freezing of valves, and even product loss when the moist content is too high for your coating or paint process. Stay in control of your dew point with the VP Dew Point ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
An attractive solution for gas and flame detection needs, the MX 62 is a modular and flexible controller that is easy to install and reduces operational costs. The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you