SCADA Systems Equipment For Monitoring And Testing Available In Liechtenstein
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
The Hycal Mini analyser provides rapid, accurate measurement of hydrogen dissolved in molten aluminium and its ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Contactless Torque Transducers with flange couplings at either end with measuring ranges from 0-100Nm up to 30kNm as standard (bespoke sensors up to 16MNm) for a variety of in line static and rotary torque measurement applications. The Datum Electronics Series FF425 non contact flange torque sensor and FF410 torque sensors have been designed to fit easily inline with any drive train or test ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3 x lower running cost, reduced degassing cost. Capital expenditure: Less than 50% CapEx, PLC not included. ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The Automation module permits user defined automated computation. For example: Average computations, specific historical files, Logging files, alarm ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech provides Medium reverse osmosis plant up to 3.5 m3/h. Low energy or high rejection membranes. All equipment mounted on stainless steel 304 skid. Available in complete Stainless Steel piping. Standard control with RO micro-controller and conductivity display. Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Extremely robust sensor to determine snow drift intensity. The sensing part of the instrument is a cylindrical, anti-abrasion, anti-adhesion and anti-rime coated tube supported by two strong stainless steel arms. The impact of drifting snow and the friction of laminar wind induce a change in internal acoustic pressure. The excitation by snow and wind is discriminated by a specific acoustic, ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech provides large Reverse Osmosis plant up to 100 ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Online, four channel Lithium detection: The measurement of lithium at low concentrations within nuclear power stations has been identified as an application perfectly addressed by a new specialty flame photometer - The BWB Nuclear. Designed in conjunction with our outstanding distributor in Germany, Mr. Wolfgang Glock, this unique flame photometer has 4 active channels for Lithium detection. Each ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Prevent high maintenance costs by monitoring and maintaining the right dew point in your system. Too much water in your system can lead to e.g. forming of rust, freezing of valves, and even product loss when the moist content is too high for your coating or paint process. Stay in control of your dew point with the VP Dew Point ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
High rejections membranes Energy recovery by turbine or pressure exchanger to maximize cost savings. All equipment mounted on stainless steel 304 skid Standard control with RO micro-controller and conductivity display Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and ...
-
PremiumManufactured by Challenge Technologybased in USA
A computer controlled, automated, testing machine, for measuring bulk specific gravity of gyratory samples or field cores of ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
An attractive solution for gas and flame detection needs, the MX 62 is a modular and flexible controller that is easy to install and reduces operational costs. The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The new electronic NDW 2 inclinometer utilises a modern measurement method based on MEMS technology for gravitational inclination measurement (rotational angle ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and larvae. Ultrafiltration is also commonly use as a Reverse Osmosis plant pretreatment. Check Lenntech UF ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3x lower running cost, reduced degassing cost. Gateway: Profinet, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you