SCADA Systems Equipment For Monitoring And Testing Available In Ohio
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The Automation module permits user defined automated computation. For example: Average computations, specific historical files, Logging files, alarm ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
An attractive solution for gas and flame detection needs, the MX 62 is a modular and flexible controller that is easy to install and reduces operational costs. The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press dewatering systems that are skid or trailer mounted. We design and manufacture the skid equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3310 Elemental Mercury Calibrator allows high level mercury monitoring systems to be accurately calibrated using elemental mercury. It integrates seamlessly with the Tekran Series 3300 speciating CEM, however it can also be used as a stand-alone mercury calibration system. The calibration source allows both multi-point calibrations and standard additions to be automatically ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Low energy or high rejection membranes, All equipment mounted on stainless steel 304 skid, Available in complete Stainless Steel piping, Standard control with RO micro-controller and conductivity display, Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and SCADA., The system includes: 5 microns filter, High pressure pump, RO or NF 4 ' ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and larvae. Ultrafiltration is also commonly use as a Reverse Osmosis plant pretreatment. Check Lenntech UF ...
-
PremiumManufactured by Trojan Technologies - Veraltobased in CANADA
The TrojanUVSwift offers proven performance against waterborne pathogens including viruses, bacteria and protozoa. Our advanced systems meet disinfection targets with unsurpassed reliability with no known disinfection ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
High rejections membranes Energy recovery by turbine or pressure exchanger to maximize cost savings. All equipment mounted on stainless steel 304 skid Standard control with RO micro-controller and conductivity display Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and ...
-
PremiumManufactured by ERGAbased in TURKEY
Wet magnetic separator with automated control system for continuous concentration of ores and nonmetallic ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The new electronic NDW 2 inclinometer utilises a modern measurement method based on MEMS technology for gravitational inclination measurement (rotational angle ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hybrid Flow Measurement with Surface Radar and Ultrasonic Profile Scanner. Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar ...
-
PremiumManufactured by Challenge Technologybased in USA
A computer controlled, automated, testing machine, for measuring bulk specific gravity of gyratory samples or field cores of ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The Bright Technologies Belt Filter Press is a modern design that includes three (3) US Patents and many innovative features that provide high performance in a compact, high value package. Many competing products are based on old and inferior designs that do not utilize filtration area effectively. Our belt press is designed with long term value and ease of operation in mind. Stainless Steel ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Extremely robust sensor to determine snow drift intensity. The sensing part of the instrument is a cylindrical, anti-abrasion, anti-adhesion and anti-rime coated tube supported by two strong stainless steel arms. The impact of drifting snow and the friction of laminar wind induce a change in internal acoustic pressure. The excitation by snow and wind is discriminated by a specific acoustic, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you