Seabed Monitoring Equipment For Monitoring And Testing Available In Puerto Rico
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Aanderaa pressure sensors are compact, intelligent pressure sensors designed for use on Aanderaa Data Instruments dataloggers as well as in other measuring systems. In most measuring systems used in the sea, pressure is a vital parameter. For moored instruments the pressure can be used for determining the actual depth of the instrument. For instrumentation on the seabed the pressure can be used ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments in shallow water environments require compact tools as well as multiple frequency bands to support a variety of survey requirements. The HMS-621 CHIRPceiver LittTM and transducer arrays fill this wide range of survey needs. The user selectable frequency bands supported by the HMS-621 include standard LF (1KHz-10KHz), or HF (8KHz-23KHz). It ...
-
Manufactured by Maritime Robotics ASbased in NORWAY
We focus on quality. The Otter Unmanned Surface Vehicle (USV) is an easily deployable turn-key system for seabed mapping and monitoring of sheltered ...
-
by Optics11based in NETHERLANDS
Long-Range Fiber Optic Systems: Securing Europe's Seabed Monitoring. Welcome to OPTICS11, leading the charge against increasing submarine threats in the North Atlantic with unmatched anti-submarine warfare solutions. Through our advanced fiber optic seabed monitoring, we ensure persistent and precise surveillance in pivotal areas like the GIUK and Bear gap. Our static seabed installations enhance ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
A Seabed Penetrator / Extractor for in-Situ Experiments. The direct analysis of seabed sediment can be a critical part of any marine investigation. However, the collection and sealing of the sediment, while also allowing for experiments to be conducted in-situ is a very difficult task. To address this challenge, K.U.M. designed the Benthic Chamber, which is capable of penetrating the seabed and ...
-
Manufactured by ECA Groupbased in SINGAPORE
ECA Group's H300 MK2 is a man portable and compact size remotely controlled vehicle (ROV) for subsea operations up to 300m ...
-
Manufactured by Boxfish Research Limitedbased in NEW ZEALAND
Integrate Multibeam Imaging Sonar with your Boxfish ROV to enhance navigation in poor visibility, improve target identification and conduct underwater surveys. ...
-
Manufactured by iXBlue Ltdbased in UNITED KINGDOM
Taking subsea positioning to the next generation. The Canopus transponder is the latest addition to the iXblue underwater positioning systems. Used as a reference seabed transponder or installed on tracked vehicles, it will contribute to the best underwater positioning solution in terms of accuracy, functionalities and ease of use. Using its expertise and accumulated experience in signal ...
-
Manufactured by Deep Ocean Engineering, Inc.based in USA
A Powerful and Manueverable Inspection Class Vehicle. The Phantom S-Series is a portable, high-performance ROV that combines superior power, telemetry, and payload with ease of use, ruggedness and reliability. It can be configured with six or eight magnetically-coupled brushless Tecnadyne® thrusters to provide agressive lift capabilities at depths up to 1,000m. It delivers a powerful overall ...
-
Manufactured by Sonavision Ltdbased in UNITED KINGDOM
RoxAnn GD-A enables the Hydrographer to create colour coded seabed material maps in 2 or 3 dimensions in real time. The GD-A system interfaces with the existing vessel echosounder and GPS onboard the survey vessel and data is displayed using compatible plotter software running on the survey PC. It is available for operation with echosounder frequencies from 24 kHz to 210kHz, as a single ...
-
Manufactured by Tritech International Limitedbased in UNITED KINGDOM
The SeaKing AUV/ ROV side scan sonar system utilises Tritech’s DST (Digital Sonar Technology) and is an extremely compact and cost effective high definition side scan sonar. The SeaKing AUV/ ROV side scan sonar has been designed for a wide range of ROV seabed survey and inspection duties. The SeaKing AUV/ ROV side scan sonar is supplied as separate transducers and an electronics module for ...
-
Manufactured by Geoquip Marine Operations AGbased in SWITZERLAND
Built in 2010, the Geoquip Speer is a DP2 integrated geotechnical survey vessel (IGSV), ideally suited to safely completing very large scale offshore wind farm scopes of work which have numerous borehole and deep push seabed CPT locations. Deep boreholes to recover high quality samples and record reliable CPT test data can be completed to provide geotechnical data for the pile design of offshore ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The MIDAS WLR replaces the popular Model 730T as Valeport's Water Level Recorder / Seabed Tide Gauge. Designed for long or short term deployments in offshore environments, or locations where a traditional shore based tide gauge is impractical, the MIDAS WLR may be moored in line or to the seabed. The standard instrument is fitted with a 0.01% accuracy pressure sensor and acetal housing for up to ...
-
Manufactured by Ocean Scientific International Ltd (OSIL)based in UNITED KINGDOM
The system is equipped with an intelligent power pack that can also be used to power instruments on and off independently of the camera. Several hours of video footage can be built up over repeated deployments depending on the camera resolution settings and memory card used. Larger power packs are available for extended deployments. Recharging and data transfer takes place via an external ...
-
Manufactured by dotOceanbased in BELGIUM
dotOcean designed an innovative geotechnical profiling system for deep sea waters, the Deep Sea GraviProbe. The system’s cone is lowered in the underwater sediment layer, analyzing those layers during intrusion. Under its own weight it penetrates loose and consolidated mud layers and measuring dynamic tip resistance as a Qc value. The data acquired from the cone, on-board accelerometers, ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
The High Capacity and Payload (HiCAP) Lander is a modular multidisciplinary seabed observatory – which K.U.M. has recently improved for near-bottom investigations through the addition of multiple sensors (including CO2, CH4, redox and EDDI correlation ...
-
Manufactured by Sediment Servicesbased in UNITED KINGDOM
We design, upgrade, manufacture, service and repair our Cohesive Strength Meters. Our Cohesive Strength Meter (CSM) is a portable instrument that measures the critical entrainment stress, erosion rate and settling velocity of bedded (deposited) soft sediments. This device directly measure the erosion sensitivity of the surface consisting of marine sediments. The CSM is used widely in intertidal ...
-
Manufactured by Geomil Equipment B.V.based in NETHERLANDS
The Manta-200 represents the latest generation Cone Penetration Test (CPT) system for determining offshore seabed soil conditions. Deployed from a steady positioned vessel or platform, the Manta-200 is designed for rapid and reliable ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
SMMT receivers are designed for carrying out shallow marine EM surveys in transition zones at depths of up to 50m. They are based on high-precision and highly-sensitive land geophysical equipment for electroprospecting surveys and are built in such a way, that equipment can easily be used for land surveys or for simultaneous marine and land EM data acquisition as ...
-
Manufactured by Kraken Robotics Inc.based in CANADA
Kraken has successfully developed and deployed a high-resolution Interferometric Synthetic Aperture Sonar (InSAS) called AquaPix®. AquaPix® is capable of providing detailed seabed images with a constant resolution better than 3cm x 3cm out to a range of 300m from each side of an underwater vehicle (600m swath). It can also produce 3D bathymetric data with a resolution better than 25cm x ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you