sediment removal system Articles
-
Tiffin, Ohio - SedVac Sediment Removal System installations applications - Case Study
Application The Aqua America plant in Tiffin sought a cost-effective, automatic solids removal solution that would eliminate the tedious, time-consuming process of taking the tanks down for maintenance. SedVac enabled Aqua America to cut down on sludge removal frequency, delivering cost savings and reliability despite fluctuations in influent water quality. ...
-
Okatie, South Carolina - SedVac Sediment Removal System installations applications - Case Study
Application The Beaufort-Jasper Water & Sewer Authority required a sludge removal system with a low profile for easy integration below tube settlers. SedVac was chosen based on its ability to be incorporated into the existing basin with minimal infrastructure changes and its successful pilot at the facility – it removed twice as much sludge in half the time and wasted 50% less water ...
-
SedVac vs. Traditional Sludge Collection Systems
Solids settling is a critical aspect of most water treatment applications. Whether a tank utilizes a form of advanced solids settling through the use of tube settlers or plate settlers, or if the basin has a simple open clarifier design, solids that amass on the floor must be periodically removed. One way to achieve this sludge collection is by draining the tank and manually sweeping the basin ...
-
TenCate Geotube technology for dewatering - case study
TenCate Geotube technology is used to protect coastlines, restore beaches, reclaim land and to store and filter polluted water. TenCate Geotube is a strong, sustainable method and a cost effective alternative to traditional hydraulic engineering constructions. The technology has already been used worldwide in more than 2,000 projects. These have involved for example the recovery of coastline, ...
-
water treatment plant header lateral for filtration
The water treatment plant is a facility that processes and purifies water for drinking, irrigation, and other uses. One of the most important components of a water treatment plant is the header lateral for filtration. Header lateral filtration is a process used in water treatment plants to remove suspended solids, such as algae and sediment, from the water. Filtration processes are like this: The ...
-
Fecal coliform removal in a lightly loaded surface-flow constructed treatment wetland polishing agricultural runoff
Constructed treatment wetlands can be an effective and sustainable method to remove pathogens that pose health risks from agricultural runoff. This study evaluated the removal of fecal coliform (FC) from agricultural runoff in a lightly loaded surface-flow treatment wetland prior to discharge to the Yakima River, Washington State, USA. The 1.6 ha system consisted of a sedimentation basin (1.4 d ...
-
Water Treatment - Torry Quay
The Client: Civils Contractor The Challenge: Following identification of heavy hydrocarbon impacted water during de-watering works, Soilutions were contacted to provide a solution. Impacted waters comprised significant free phase oil on the surface, significant dissolved phase oils, and unknown sediment loading. Requested flow rates were 60m3/hr. Supervision was requested to be at a minimum. ...
-
How do you clean a stormwater management pond?
How do you clean a stormwater management pond (SMWP) without draining the pond first? A clean-out of the SWMP is required once every 5-15 years to remove accumulated sediments to ensure the pond continues to function as intended. Drainage of the SWMP is not always required to facilitate the clean-out. By combining the pumping and excavation into one process! New pumping technology - Dragflow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you