Seismic Instruments Equipment For Monitoring And Testing Available In Madagascar
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
Diemme Filtration’s High Rate thickeners are an advanced product derived from our extensive experience in solid/liquid separation applications, such as mining, chemical, waste water and more, coupled with our technical research to continuously improve and optimize sedimentation in filtration ...
-
Manufactured by Silver Automation Instruments Ltdbased in CHINA
AJ-D series Batch Controller is suited to flow applications where precise measurement and batch control quantities is ...
-
Manufactured by Williams Form Engineering Corporationbased in USA
Williams Pre-Stressing / Post Tensioning Systems consist of high tensile steel bars available in seven diameters from 1" (26 mm) to 3" (75 mm) with guaranteed tensile strengths to 1027 kips (4568 kN). They are provided with cold rolled threads over all or a portion of the bar's length. All tension components for the systems are designed to develop 100% of the bar strength. All components of ...
-
based in USA
The SMG is the basic element of our cabled and the cable-free Seismic Data Acquisition Systems. Seismic Instruments developed this unit for single-sensor-based telemetry operation to record high fidelity seismic data. SI’s unique Smart Geophone (SMG) outputs a digital signal directly from each sensor. The unit incorporates signal conditioning and digitizing, tester electronics and a ...
-
Distributed by ITT Engineered Valvesbased in USA
Our Enidine brand viscous dampers are hydraulic devices that help protect customers’ structure and systems from unwanted shock and vibration due to earthquakes or other seismic events. These versatile devices are used on bridges, high-rise buildings, stadiums and city centers. Custom solutions have also been developed for power and utility sub-stations, power plants, oil and gas offshore ...
-
Manufactured by Reftek Systems Inc.based in CANADA
24-bit Strong Motion Accelerograph. 130-SMHR Strong Motion High Resolution Recorder provides accurate data and related information about seismic events, especially as they relate to buildings and structures. The 130-SMHR meets the USGS Advanced National Seismic System (ANSS) specifications for strong motion reference stations for deployment in urban areas. It is also certified under the ...
-
Manufactured by EnviroSep Incbased in USA
Chemical Process Systems are complete chemical processes fabricated in modules that may be integrated into an existing process or coupled with other modules to complete a process. A unit operation is not complete without pumps, piping, instrumentation and automated controls. That is the value of integrating equipment to meet a functional need in the chemical process. These chemical process units ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
Single component seismic sensor designed according to highest quality standard, with case for outdoor installation and maximum protection of internal components. It can be connected to Mae instruments for Seismic Monitoring and building continuous monitoring. Rapid and practical fixing due to fins with predetermined holes, in case of fixing on vertical walls it is possible to use L mounting ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
3D seismic sensor designed according to highest quality standard, with case for outdoor installation and maximum protection of internal components. It can be connected to Mae instruments for Seismic Monitoring and building continuous monitoring. Rapid and practical fixing due to fins with predetermined holes, in case of fixing on vertical walls it is possible to use L mounting bracket supplied ...
-
Manufactured by Piletest.com Limitedbased in UNITED KINGDOM
PSI uses the well-known Parallel Seismic method to establish the depth of existing foundations (specifically for a pile or deep foundations) where the superstructure (i.e. existing building) precludes access to the pile heads. It is sometimes the only pile integrity test that can be prefromed. The test requires the installation of a plastic access tube in parallel, and as close as possible, to ...
-
Manufactured by Geodevicebased in FRANCE
DAQLink-4 is a cutting-edge performance portable multichannel 24-bit digital seismograph. It can operate as a stand-alone unit for small and fast near-surface surveys, acquisition system for larger projects with online monitor and data quality control, as well as passive monitoring and automated event ...
-
Manufactured by MoHo s.r.l.based in ITALY
Bringing the past of multichannel seismographs to a new life. SOILSPY is the MoHo’s multichannel digital system for active and passive seismic surveys. A number of unique features make it a very special seismograph. The signal is amplified and digitized where it is produced and not at the end of long cables: this ensures better recording quality and, allied to a lightweight system, forms a ...
-
Manufactured by ISTI - Instrumental Software Technologies, Inc.based in USA
The GEOfba200 (Fig. 1 - 3) is a very low-noise triaxial force-balance accelerometer with a large dynamic range, suitable for seismology, hazard mitigation and civil engineering applications. The instrument has both a flat response to ground acceleration from DC to 215 Hz and a stable phase response within the passband. Output range is 40Vpp differentially and supports variety range of gain sets ...
-
Manufactured by Kinemetrics Inc.based in USA
The Q330HR digitizer sets a new performance standard in seismological instrumentation, building upon the widely praised ultra-low power Q330 digitizer. The Q330HR breaks the 24-bit performance barrier to extend the capability of instrumentation for advanced research. The Q330HR remains 100% compatible with ...
-
based in USA
The Seismic Instruments Central Recording Unit (CRU) is designed to interface the field telemetry units with the Operator Console Computer. The Unit has two lines (A, B) for the field equipment and four optional auxiliary channels. It also communicates with the energy source control unit. It provides multiple functions within the Cabled System. ...
-
Manufactured by PASI s.r.l.based in ITALY
The 3D Land Geophone Mod. 3DLG-2 is the ideal accessory to add to your seismic instrumentation and perform HVSR, MASW and Vibration Analysis. One vertical and two horizontal high-performing sensors - with 2Hz resonance frequency and properly coupled - are mounted in a robust waterproof case, delivered with adjustable feet and inter-changeable ...
-
Manufactured by Little Firefighterbased in USA
Shuts Off Gas When Triggered by a Significant Seismic Event, Greatly Reducing Fire Risk, Milled Solid Aluminum Design for Strength and Durability, Most State-of-the-Art Compact Design, Manual Reset Available On Both Sides, Complies With All City, State, & Lab Testing Requirements, ASCE 25-16 ...
-
Manufactured by Geobit Instrumentsbased in GREECE
GEOtiny30/60/120 is a compact miniature digital broad-band seismometer which integrates three seismic and three acceleration channels. It supports high resolution 24bit digitizer, embedded linux OS and GPS or NTP timing. Seedlink server ensures reliable real time data telemetry while large storage volume ensures long period local data recording. The instrument has very low power consumption so it ...
-
Manufactured by Little Firefighterbased in USA
Shuts Off Gas When Triggered by a Significant Seismic Event, Greatly Reducing Fire Risk, Milled Solid Aluminum Design for Strength and Durability, Most State-of-the-Art Compact Design, Manual Reset Available On Both Sides, Complies With All City, State, & Lab Testing Requirements, ASCE 25-16 ...
-
Manufactured by McLane Research Laboratories, Inc.based in USA
McLane Glass flotation, depth-rated to 6,000m, is ideal for moorings and custom instrument design such as ocean-bottom seismology instruments. Flotation modules with 12” borosilicate glass spheres have 10 to 40kg of buoyancy and are protected by polyethylene, high visibility hardhats. Multiple spheres in a modular configuration have a through-center connecting rod to reduce mooring drag. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you