Seismic Monitoring Equipment For Monitoring And Testing Available In Australia
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The SmallRotoSonic PL (SRS-PL) excels trough capturing the powerful sonic force in an extraordinary small and manoeuvrable package. Despite its size, this sonic drilling rig is perfect for various applications. We use direct push when 150Hz SmallRotoSonic delivers faster and better results and provides undisturbed samples. Despite the size of this machine, it still delivers an extremely powerful ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
SpectroTRACER is a continuous operating measurement system for nuclide specific detection of even lowest level gamma contamination in air (SpectroTRACER-Air/Soil) and in liquids (SpectroTRACER-Aqua). The probe performs spectroscopic analysis of the measurement in order to identify the detected radionuclides. SpectroTRACER is used for radiation monitoring when a standard gamma dose rate monitor is ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The double packer system was developed, built and successfully used in stimulation tests by Solexperts for Geo-Energie Suisse as part of their involvement in the Bedretto rock laboratory. The test tool essentially consists of a double packer system for stimulation and a series of geophones which are used to measure and localise the seismic events of the hydraulic ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Fit Slab is a formwork made of polypropylene; its principal function is lightening and, when used in conjunction with prefabricated beams made of pre-stressed reinforced concrete, or lattices or directly on prefabricated lattice slabs, it enables the construction of various types of voided slabs made of reinforced concrete, with extremely quick installation in both reconstructions and new ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL170 MAX DUO (CRS XL170 MAX DUO) is larger than the CRS XL140 DUO variant. As such this machine offers more space for various options that are available. The rig is equipped with CompactRotoSonic drill head as well as a four speed rotation head. Thanks to the different drill heads, the machine can easily work under different conditions. The drilling heads are easy to change ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
U-Bahn Beton is a modular formworks in recycled polypropylene that was specifically designed to create one way slabs that are cast on site or semi-prefabricated. The various modules, which overlap on the edges, make it possible to create beams of any length. Thanks to its conic elevator feet, immersing the U-Bahn® Beton formworks in the concrete casting will obtain thick, parallel beams that ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Truly robust crawler-based CPT penetrometer pushing rig with rubber tracks, Hatz 3-cylinder diesel engine incorporated in a sound insulating enclosure, load-sensing hydraulic pump, a 200 kN CPT penetrometer pusher, unique anchoring system on reaction arm. Practically all functionalities are controlled by means of a wireless remote control. The Griffin 200 kN is made of the highest quality ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Flexnet is a modular sensor solution offering strength protection and monitoring of critical sites. Developed by Exensor, Flexnet combines a comprehensive toolbox of sensors for Military and Homeland protection ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments require multiple frequency bands to support a wide variety of survey requirements. The HMS-622 CHIRPceiverTM and its Family of Transducer Arrays and Vehicles can fill this wide range of survey needs. The frequency bands supported by the HMS-622 include standard LF (1KHz- 10KHz), and optional ULF (200Hz-2KHz) and HF (8KHz- 23KHz). It can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The SmallRotoSonic ML DUO (SRS ML DUO) has, in combination with the SmallRotoSonic drill head, a four speed rotation head. It is easy to switch between the sonic drill head and rotary head by shifting the trolleyboard to the left or the right to combine Sonic sampling and diamond core drilling in the same borehole. The SRS ML DUO delivers True 150 HZ Frequency which makes it really powerful. This ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
Extremely quick data provision thanks to 6-core processor. 2 functions in one unit: acoustic leakage detection and correlation. Automatic or manual measurement possible. Easy-to-understand display and easy operation due to large colour ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Winch, Portable (Backpack) Manual 2 Speed. HR-1/HR-2 Backpack Winch. The HR-1 and HR-2 are designed for line handling duties. The HR-1 is direct drive, while the HR-2 has two speeds ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The MidRotoSonic XL MAX (MRS XL MAX) is the bigger version of our CRS XL. This larger sonic drill accommodates the powerful 50K MidRotoSonic drill head. Thanks to the higher drilling capacity and the higher drilling speed, this sonic drill can handle anything. Even harder surfaces pose no challenge for the MRS XL MAX thanks to the powerful 50K MidRotoSonic drill head. The drill head vibrates and ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Deep water sub-bottom profiling applications (1Km to 12Km) require an array of 4 to 36 low frequency transducers installed in a hull-mounted sea chest. The HMS-12KM system with the HMS-622 CHIRPceiverTM and hull mounted transducer arrays fills this range of survey requirements. The frequency bands supported by the HMS- 12KM include LF (1KHz-10KHz) and HF (8KHz-23KHz) with a standard 2 channel ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
Simple and reliable guidance to the leakage. Triple function: acoustic or tracer gas-driven leakage and pipe detection. Suitable for any user thanks to manual and automatic functions. 256 free selectable filters. Leakage profile recordable as file, and reporting possible on the PC. Colour touch screen, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic Crawler is a drilling machine that can operate under different working conditions. Its stability and rigidity optimise the power of the CompactRotoSonic drill head. This drilling rig excels in smaller spaces because it is so manoeuvrable. This drilling rig features the drill head which allows simultaneous rotation and vibration. A separate swivel allows for liquid, foam or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you