Seismic Monitoring Equipment For Monitoring And Testing Available In Nicaragua
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
CorGal is an acronym used to describe corrugated and galvanized steel. CorGal is a registered trademark of Water Storage Tanks, Inc., the manufacturer of CorGal tanks. The CorGal tank was developed to provide a non-corrosive storage vessel for the liquid containment industry. Our tanks are popular and diverse with solutions for rainwater harvesting, stormwater management, fire protection, ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The MidRotoSonic XL MAX DUO (MRS XL MAX DUO) is a larger version of the CRS XL, with two different drill heads. The MidRotoSonic XL MAX DUO accommodates a MidRotoSonic 50k drill head and a four-speed Rotation drill head. Both heads are mounted on a hydraulic side shift. The MRS XL DUO accelerates drill speed, capacity and boosts your productivity. The DUO option will allow sonic drilling in all ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Fit Slab is a formwork made of polypropylene; its principal function is lightening and, when used in conjunction with prefabricated beams made of pre-stressed reinforced concrete, or lattices or directly on prefabricated lattice slabs, it enables the construction of various types of voided slabs made of reinforced concrete, with extremely quick installation in both reconstructions and new ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The FSI seismic source can be used independently or synchronized with other sources during off-shore, transition zone and site surveys. These highly reliable and dependable systems have demonstrated more than 500,000 shots without maintenance. The development of HawkEye Clear Signature technology was enabled by the extremely clean and repeatable source pulse and high shot-to-shot phase and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The SmallRotoSonic ML DUO (SRS ML DUO) has, in combination with the SmallRotoSonic drill head, a four speed rotation head. It is easy to switch between the sonic drill head and rotary head by shifting the trolleyboard to the left or the right to combine Sonic sampling and diamond core drilling in the same borehole. The SRS ML DUO delivers True 150 HZ Frequency which makes it really powerful. This ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Winch, Portable (Backpack) Manual 2 Speed. HR-1/HR-2 Backpack Winch. The HR-1 and HR-2 are designed for line handling duties. The HR-1 is direct drive, while the HR-2 has two speeds ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 Bubble GunIM systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The double packer system was developed, built and successfully used in stimulation tests by Solexperts for Geo-Energie Suisse as part of their involvement in the Bedretto rock laboratory. The test tool essentially consists of a double packer system for stimulation and a series of geophones which are used to measure and localise the seismic events of the hydraulic ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The MidRotoSonic XL MAX (MRS XL MAX) is the bigger version of our CRS XL. This larger sonic drill accommodates the powerful 50K MidRotoSonic drill head. Thanks to the higher drilling capacity and the higher drilling speed, this sonic drill can handle anything. Even harder surfaces pose no challenge for the MRS XL MAX thanks to the powerful 50K MidRotoSonic drill head. The drill head vibrates and ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
The most common CorGal tanks in use are the tanks with 30-degree roofs. This standard tank consists of corrugated galvanized steel wall sheets with a 30-degree galvanized steel roof system. The standard 30-degree roof tanks are equipped with a geotextile preliner and a flexible membrane main liner for water containment. The corrugated high-rib roof (CHR) design is standard on all models 12′ ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL140 is a high-performance sonic drill, equipped with a CompactRotoSonic drill head. This drilling rig is a smaller version than the DUO versions and than the CRS XL170. The CRS XL140 may be more compact in size, but it is still a very powerful sonic drilling machine. Despite its smaller size, it delivers all the power you need for the many applications for which this ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Our SRS-ML is a small, powerful and compact Sonic drilling rig. The drilling machine combines its convenient size with efficiency and cost-effectiveness. This is why our SRS-ML really makes the difference. The SRS-ML is suitable for various purposes and can be used for Mineral sampling, Environmental exploration, Geo-technical sampling and testing, Geo-constructional drilling and Seismic ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments require multiple frequency bands to support a wide variety of survey requirements. The HMS-622 CHIRPceiverTM and its Family of Transducer Arrays and Vehicles can fill this wide range of survey needs. The frequency bands supported by the HMS-622 include standard LF (1KHz- 10KHz), and optional ULF (200Hz-2KHz) and HF (8KHz- 23KHz). It can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL170 MAX (CRS XL170 MAX) is not only powerful but also multi-purpose. The easy-to-use drill is simple to handle, making it perfect for use in smaller spaces. This sonic drill is supplied with a drill rod manipulator. Our CRS XL170 MAX is extremely strong thanks to the true 150 Hz frequency that the machine provides. The drilling rig can be used in many ways. It can be used ...
-
PremiumManufactured by CETCObased in USA
Cetco Coarse Chips are natural sodium bentonite screened to 3/8 inch (0.95 cm) to 3/4 inch (1.90 cm) in size. Puregold Medium Chips are natural sodium bentonite screened to 1/4 inch (0.64 cm) to 3/8 inch (0.95 cm) in size. Cetco Coarse Chips and Puregold Medium Chips are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you