Monitoring and Testing Services in Denmark

  • Premium

    On-Site Pyrometer Maintenance Solutions

    Your brand-new pyrometers are precisely calibrated at the factory, which is documented with a corresponding certificate. Like every high-precision measuring instrument, pyrometers should be checked on a regular basis to ensure accurate long term measurement results.

    By LumaSense Technologies, Inc. Office in Ballerup, DENMARK. from On-Site Calibration and Repair Service line

  • Premium

    General Overhaul and Repairs Services

    In our newly-equipped and designed repair center, we offer repairs of AERZEN Positive Displacement Blowers, Screw Compressors and Gas Meters as well as external blower and compressor stages. No matter whether you ask for the repair of an AERZEN stage or an external stage you in person can effect assembly and disassembly of the stages as well as ...

    By Aerzener Maschinenfabrik GmbH Office in Taastrup, DENMARK. from Field Service Service line

  • Premium

    On-Site Pulsar Preventative Solutions

    Periodic maintenance of Pulsar systems is essential to ensure accurate temperature measurement and avoid costly shutdowns. Our E2T Pulsar support services are designed to keep your E2T Pulsar system performing with minimal downtime for the long-term. We can schedule to have an experienced and dedicated Field Service Engineer come out to your site ...

    By LumaSense Technologies, Inc. Office in Ballerup, DENMARK. from On-Site Calibration and Repair Service line

  • Premium

    On-Site Infrared Survey Support Services

    Our on-site Infrared Survey support services have been specifically designed to keep your systems performing with minimal downtime for the long-term. Depending on your assets, it is very important to monitor their temperatures on a monthly and/or quarterly basis.

    By LumaSense Technologies, Inc. Office in Ballerup, DENMARK. from Field Service Service line

  • Premium

    Aerzen Relubrication Device

    AERZEN relubrication devices lubricate the bearings of electric motors automatically and dosed with the correct grease quantity according to manufacturer’s specifications. Time intervals are possible up to 36 months. This allows a permanent and economical operation of all packaged units made by Aerzen.

    By Aerzener Maschinenfabrik GmbH Office in Taastrup, DENMARK. from Original Aerzen Parts Service line

  • Premium

    Safer Chemical Analytics Services

    How effectively are you protecting employees, consumers and communities? With increasing consumer and regulatory pressure to identify risk and replace harmful chemicals with safer, more eco-friendly alternatives, there is a growing need for chemical risk assessment and management as part of a comprehensive sustainability strategy.

    By Verisk 3E Office in Copenhagen, DENMARK.

  • Premium

    Factory Calibration Services

    We know your LumaSense equipment plays a critical role on your process and research.  Precision is imperative so we’ve established a fully equipped, expertly staffed laboratory for performing calibrations that meet national standards on all makes (MIKRON, IMPAC, E2T, Avio, LUXTRON, SmartDGA®, INNOVA, and ANDROS) of LumaSense ...

    By LumaSense Technologies, Inc. Office in Ballerup, DENMARK. from Factory Service Service line

  • Premium

    Toxic Substances Control Act (TSCA) Services

    3E Company provides support for the complex and time-consuming tasks associated with regulatory compliance for the Toxic Substances Control Act (TSCA). Outsourcing this process to a team of experienced regulatory professionals that is actively involved and engaged in these activities on a daily basis can be a highly efficient and effective way to ...

    By Verisk 3E Office in Copenhagen, DENMARK. from Regulatory Consulting Services Service line

  • Premium

    Regulatory Reference Services

    How do you ensure products can be manufactured, shipped and sold in their intended markets? When teams use a variety of disparate methods and inconsistent sources to research a myriad of constantly changing regulations and industry trends it can be costly, and not only in terms of the considerable time and resources required. It can also increase ...

    By Verisk 3E Office in Copenhagen, DENMARK.

  • Premium

    Tyre Recycling Services

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. During the end of the last century, and during the beginning of this, the European Union legislated on landfill to reduce the negative effect it has on the environment (the Landfill Directive 1999/31/EC). Later on ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Startup, Commissioning Support & Guaranteed Performance Services

    All Munters equipment leaves our factories only after an extensive test procedure. A natural continuation is to have Munters’ highly qualified service team startup the equipment on site. We produce a performance values report documenting ambient conditions and all inlet and outlet parameters. We then compare that with how the machine should ...

    By Munters Office in Denmark, DENMARK.

  • Premium

    Cable Recycling Service

    To achieve the required type of end-product different standard recycling plants are available. These standard plants are also the starting point when plants are tailored to suit specific customer requirements. Within the range offered for processing of cables there are plants for processing of dry cables, jelly filled telecommunication cables and ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Electronic Waste Recycling Services

    To achieve the required type of end-product different standard WEEE (Waste Electrical and Electronic Equipment) recycling plants are available. These standard plants are also the starting point when plants are tailored to suit specific customer requirements. The flexibility of the modular approach means that a number of combinations can be ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Shredder Light Fraction (SLF) Recycling Services

    Other names for SLF (Shredder Light Fraction) are ASR (Automobile Shredder Residue) and Auto fluff or just fluff. For further processing of the SLF material originating from ELV (End of Life Vehicle), Eldan is able to offer various standard recycling plants. These standard plants are also the starting point when plants are customized to suit ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Storage, Transport & Waste Support Services

    How effectively and efficiently are you managing hazardous materials compliance today? Hazardous materials classification, storage, transport and disposal are critical functions which can expose the company, employees and customers to significant risk. With complex regulations that vary at local, state and federal levels, understanding and ...

    By Verisk 3E Office in Copenhagen, DENMARK.

  • Premium

    Specialty Services

    Sometimes you need customized training, whether it’s a challenging, highly specialized application or just a matter of convenience and scheduling. For those situations, LumaSense offers specialty services, consulting and custom training.

    By LumaSense Technologies, Inc. Office in Ballerup, DENMARK.

  • Premium

    Inspection and Maintenance Services

    Do you need regular inspection and maintenance, or maintenance of your AERZEN packaged unit? Or do you have a technical problem which cannot be solved by our phone support or by your own maintenance team? Then, AERZEN assembly service will help you. Our teams, which are in place all over the world, know what is important, and will quickly arrive ...

    By Aerzener Maschinenfabrik GmbH Office in Taastrup, DENMARK. from Field Service Service line

  • Premium

    Machine Diagnosis for Professional Data Analysis Services

    Machine diagnosis means testing the units for vibration. The goal is to extend the units’ run time by measuring their vibration on a regular basis. AERZEN’s alternative is to measure vibration, temperature and RPM with a mobile device, as well as using an integrated system for constant online monitoring.

    By Aerzener Maschinenfabrik GmbH Office in Taastrup, DENMARK. from Analysis and Consulting Service line

  • Premium

    Acoustic Evaluations Services

    Optimisations in planning and projecting phase and at already existing plants. AERZEN machines run quietly. But because operational environments differ, we have acoustic specialists on hand to help with the solutions you need, quickly and sustainably.

    By Aerzener Maschinenfabrik GmbH Office in Taastrup, DENMARK. from Analysis and Consulting Service line

  • Premium

    On-Site Blackbody Calibration Services

    LumaSense Technologies, Inc. can schedule to have an experienced and dedicated Field Service Engineer come out to your site to perform the field commissioning and inspection. This includes troubleshooting and verification of calibration of various Mikron Blackbody Sources.

    By LumaSense Technologies, Inc. Office in Ballerup, DENMARK. from On-Site Calibration and Repair Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you