Siloxanes Monitoring Downloads
-
Premium
STS - Siloxane Monitor - Information Package 2017 - Brochure
The STS Siloxane Monitor has demonstrated that Carbon tower filter failure and regenerative processes can be identified, trended, and quantified. The resultant data may be used to manage filter change regimes to potentially extend filter life, to optimise regenerative processes, and or, prevent engine damage from siloxane laden ...
-
Premium
STS - Siloxane Monitor - Product Datasheet 2018
Siloxanes are a class of organic Chemicals containing silicon, which burn in CHP engines, producing silica, in effect sand, which is highly damaging to engines and results in major, frequent engine damage and hence overhauls. The solution is to remove the damaging siloxanes in the Biogas or Landfill gas before they reach the CHP engine, this is achieved by using either an activated carbon filter ...
-
Premium
STS - Siloxane Monitor - Operators Manual
STS Instruments have 25 years of experience in designing, developing, manufacturing and selling scientific instruments for sale in the UK and for export. The STS Siloxane Monitor has been designed to continuously monitor the gas stream on biogas and landfill gas generation systems to quantify the level of potentially engine damaging Siloxanes in the Gas. In particular, the application of the ...
-
Premium
STS - Siloxane Monitor to Optimise Process Control - Brochure
There are two popular systems for the removal of Siloxanes from Biogas, Activated Carbon Filters and Regenerative ...
-
Premium
STS Instruments - Siloxane Monitor - Specification
The STS Siloxane Monitor is CE certified and complies with IGE SR25 ...
-
Premium
STS Instruments - Regenerative Filter - Brochure
The Siloxane Monitor may be used for the optimisation of regenerative filter regimes ensuring that the maximum capacity of the filters is used before regeneration takes place. Cost efficiencies can therefore be made saving on the frequency of expensive regeneration, the data will also give advance warning of a deterioration of the filter media and therefore less efficient siloxane ...
-
Premium
STS - Siloxane Monitor - Brochure
The STS Siloxane Monitor has, unlike other available units been designed specifically and solely for the analysis of siloxanes in gases supplied to CHP engines. This ground up development has resulted in the instrument being simple to install, run and maintain whilst providing clear and understandable ...
-
Premium
STS - Siloxane Monitor - Technical Specification
The STS Siloxane Monitor has demonstrated that Carbon tower filter failure and regenerative processes can be identified, trended, and quantified. The resultant data may be used to manage filter change regimes to potentially extend filter life, to optimise regenerative processes, and or, prevent engine damage from siloxane laden ...
-
Premium
STS Siloxane Monitor - Application
The STS Siloxane Monitor can sample from up to 3 points between the incoming gas stream and the engine. In typical application, these would be before the Activated Carbon filter (eg unfiltered gas), between a pair of filters where they operate a "primary and secondary" system and after the final filter (eg clean gas). The Monitor can therefore be used to trend filter use and predict filter ...
-
Siloxane Monitoring System
The Ohio Lumex Continuous Monitoring System is an independent and fully automated measurement system developed to precisely quantify the concentration of siloxanes in biogas. The instrument separates compounds in two separate stages, combing the selectivity of a Gas Chromatograph (GC) with the extraordinary sensitivity (low ppbv) of an Ion Mobility Spectrometer (IMS). ...
By Ohio Lumex
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you