Smoke Detection Equipment For Monitoring And Testing Available In Czech Republic
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept SDTS is based on the best selling ViCount Hi temperature smoke system. Unlike conventional water based smokes, the smoke produced by the Concept SDTS is resistant to extremely high temperatures. The unit requires an inert propellant gas, and is supplied complete with a CO2 cylinder and regulator. It is capable of simply and repeatedly creating nontoxic artificial smoke, from small ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept's B1 is a robust and fully portable smoke system, operating from an on board 12vDC battery. Whilst not quite as tiny as the Air Trace smoke generator the B1 produces considerable amount of smoke for a battery powered smoke system. With a 400w heat exchanger, the B1 is capable of producing a good volume of safe, controllable smoke on demand in areas where no mains is available. The B1 also ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Flow Check from Concept is the ideal instrument for monitoring small scale air currents / air movements and for testing the integrity of air-tight systems. It creates a small cloud of safe smoke. The resulting smoke comes out of the Flow Check smoothly and gently as to not to disturb any air movement. The Flow Check smoke machine is small, hand-held, battery powered & easy to ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
OSi's patented Wind Speed and Smoke Sensor (WSS™) makes drift free air flow measurements across the tunnel, calculates true average wind speed, and detects smoke. The WSS-300-DS model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter, smoke, or moisture suspended in tunnel. The WSS-300-DS uses OSi patented optical ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
Manufactured by Jacarta Ltd.based in UNITED KINGDOM
In addition to the temperature/humidity sensors supplied with our monitoring products it is possible to add other sensors to increase your monitoring coverage and help avoid Data Centre ...
-
Manufactured by Chubb Fire & Security Groupbased in CANADA
The 511C continually monitors its own sensitivity and operational status, and provides a visual indication if it drifts out of the sensitivity range or fails internal diagnostics. Additional diagnostic information is activated by applying a magnet near the detector’s integral reed switch. This initiates a self-diagnostic routine and provides visual indication of sensitivity level, or if ...
-
Manufactured by Kidde-Fenwal, Inc.based in USA
The DH-60 Series Duct Detectors are suited for use with HVAC systems in commercial, industrial and institutional fire alarm applications. The DH-60 is easily mounted to both rectangular and round ducts from 8 inches (200 mm) to 12 feet (3.6 m) wide and is compatible with all ducts with air velocities between 500 and 4000 feet per minute (2.5 to 20 m/s). The operation of the DH-60 Duct Detector is ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
The non-road machinery/diesel vehicle exhaust smoke detection system (stand-alone version) is equipped with transmission type smoke meter, display and sampling probe, and optional built-in printer can be used to measure the exhaust smoke of the engine/diesel vehicle; Portable design can realize on-vehicle measurement and real-time grasp of the emission level under actual working ...
-
Manufactured by Notifier Fire Systemsbased in UNITED KINGDOM
The ID3000 can be configured to control a system of between 2 and 8 addressable loops. Each loop can support up to 198 devices (99 detectors + 99 call points / interfaces / AV devices) with a total of up to 255 zones per panel. The ID3000 is designed in a modular fashion to allow for a wide range of applications, facilitating installation and servicing whilst making the ID3000 very easy to tailor ...
-
Manufactured by ARTONbased in UKRAINE
Еffective for detecting fires at their early stages. Red LED indicates proper operation and alarm condition. Mounting base included. High resistance to false alarm. Fault signal when the detector is detached from the base . Mechanical testing. Options of bases. Compatible with various fire alarm control panels. Ceiling/wall mountable. Mounting ring available to install the detector onto . ...
-
Manufactured by Kidde Fire Systemsbased in USA
The AIR-Intelligence high-sensitivity smoke detection system (HSSD) provides superior early warning smoke detectors that adapt to virtually any ...
-
Manufactured by SDĀ³ Security Detection Direct Distributionbased in FRANCE
Conventional optical smoke detector, for 12V security type systems, to be used with R05 relay board, alarm latched or autoresettable (AR ...
-
Manufactured by Global Fire Equipment (GFE)based in PORTUGAL
The ZEOS-AS series of analogue addressable detectors have been designed to be fully compatible with GFE’s addressable fire alarm control ...
-
based in USA
With our Core rooftop units (formerly Series 12R), you can get the exact fit you need plus the features you want. From USB data transfers to innovative refrigerant, with our Core units you can literally have it all. Save time and money on installation with this reliable unit. Our Core units come available in two compact cabinet sizes, two footprint sizes and two height options. Enjoy the ...
-
Manufactured by Frontier Safety Limited UKbased in UNITED KINGDOM
Addressable Smoke Detectors with Standard Base, Brand: FRONTIER, Model No:FRN30, Spec:Two Wire Bus Connection That Ensures Convinient Installation And Maintainance. ...
-
Manufactured by Secutronbased in CANADA
The BEAM1224– CONVENTIONAL BEAM SMOKE DETECTORS is a four-wire conventional reflected beam smoke detector, which is uniquely suited for protecting open areas with high ceilings, where other methods of smoke detection are difficult to install and maintain. This type of conventional smoke detectors is to be used with UL Listed compatible control panels only. An advantage of this single-ended ...
-
Manufactured by YASUDA SEIKI SEISAKUSHO, LTD.based in JAPAN
This tester is used to measure the melt flow index of thermo-plastic. The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die. The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test ...
-
Manufactured by Westminster International Ltd.based in UNITED KINGDOM
Using the unique IR activation and Cross Air Technology, the heat generation process takes place only when the detector under test is within the cup with hot air blown horizontally in a focussed beam directly toward the sensor for optimum energy use and results. Interchangeable NiMH battery batons and a fast battery recharger enable testing all day with a cable free ...
-
Manufactured by Ambest Electronics (Ningbo) Co Ltdbased in CHINA
SNC-300-CL non-addressable photoelectric smoke/heat detectors are state-of-the-art detectors suitable for connection to 2-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection control and indicating equipment that can accept non-addressable type detectors . Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you