Smoke Detection Equipment For Monitoring And Testing Available In San Marino
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
OSi's patented Wind Speed and Smoke Sensor (WSS™) makes drift free air flow measurements across the tunnel, calculates true average wind speed, and detects smoke. The WSS-300-DS model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter, smoke, or moisture suspended in tunnel. The WSS-300-DS uses OSi patented optical ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept's B1 is a robust and fully portable smoke system, operating from an on board 12vDC battery. Whilst not quite as tiny as the Air Trace smoke generator the B1 produces considerable amount of smoke for a battery powered smoke system. With a 400w heat exchanger, the B1 is capable of producing a good volume of safe, controllable smoke on demand in areas where no mains is available. The B1 also ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Flow Check from Concept is the ideal instrument for monitoring small scale air currents / air movements and for testing the integrity of air-tight systems. It creates a small cloud of safe smoke. The resulting smoke comes out of the Flow Check smoothly and gently as to not to disturb any air movement. The Flow Check smoke machine is small, hand-held, battery powered & easy to ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept SDTS is based on the best selling ViCount Hi temperature smoke system. Unlike conventional water based smokes, the smoke produced by the Concept SDTS is resistant to extremely high temperatures. The unit requires an inert propellant gas, and is supplied complete with a CO2 cylinder and regulator. It is capable of simply and repeatedly creating nontoxic artificial smoke, from small ...
-
Manufactured by Jacarta Ltd.based in UNITED KINGDOM
In addition to the temperature/humidity sensors supplied with our monitoring products it is possible to add other sensors to increase your monitoring coverage and help avoid Data Centre ...
-
Manufactured by Chubb Fire & Security Groupbased in CANADA
The 511C continually monitors its own sensitivity and operational status, and provides a visual indication if it drifts out of the sensitivity range or fails internal diagnostics. Additional diagnostic information is activated by applying a magnet near the detector’s integral reed switch. This initiates a self-diagnostic routine and provides visual indication of sensitivity level, or if ...
-
Manufactured by Kidde-Fenwal, Inc.based in USA
The DH-60 Series Duct Detectors are suited for use with HVAC systems in commercial, industrial and institutional fire alarm applications. The DH-60 is easily mounted to both rectangular and round ducts from 8 inches (200 mm) to 12 feet (3.6 m) wide and is compatible with all ducts with air velocities between 500 and 4000 feet per minute (2.5 to 20 m/s). The operation of the DH-60 Duct Detector is ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
The non-road machinery/diesel vehicle exhaust smoke detection system (stand-alone version) is equipped with transmission type smoke meter, display and sampling probe, and optional built-in printer can be used to measure the exhaust smoke of the engine/diesel vehicle; Portable design can realize on-vehicle measurement and real-time grasp of the emission level under actual working ...
-
Manufactured by Notifier Fire Systemsbased in UNITED KINGDOM
The ID3000 can be configured to control a system of between 2 and 8 addressable loops. Each loop can support up to 198 devices (99 detectors + 99 call points / interfaces / AV devices) with a total of up to 255 zones per panel. The ID3000 is designed in a modular fashion to allow for a wide range of applications, facilitating installation and servicing whilst making the ID3000 very easy to tailor ...
-
Manufactured by ARTONbased in UKRAINE
Еffective for detecting fires at their early stages. Red LED indicates proper operation and alarm condition. Mounting base included. High resistance to false alarm. Fault signal when the detector is detached from the base . Mechanical testing. Options of bases. Compatible with various fire alarm control panels. Ceiling/wall mountable. Mounting ring available to install the detector onto . ...
-
Manufactured by Kidde Fire Systemsbased in USA
The AIR-Intelligence high-sensitivity smoke detection system (HSSD) provides superior early warning smoke detectors that adapt to virtually any ...
-
Manufactured by Piera Systemsbased in CANADA
Measuring indoor air quality is made easy with the Canaree A1 Air Quality Monitor. Just plug the Canaree A1 into a laptop or an Aruba wireless access point and start seeing accurate air quality data in under a ...
-
based in USA
Future Energy platforms are designed to connect, integrate and communicate with all systems, devices and software within a building, allowing various facility and human resources to “talk with each other” and enable real-time decision making. Our connective solutions empower you to seamlessly harvest and measure data, improving productivity, streamlining process efficiency, and ...
-
Manufactured by Kidde-Fenwal, Inc.based in USA
The 700 Series conventional smoke detector is an interchangeable head and base detector with a light scattering optical sensor that provides an excellent response to a wide range of fires. The 700 Series consists of two and four wire conventional photoelectric smoke, as well as photoelectric smoke with heat ...
-
Manufactured by Thomas Sys Tech GmbHbased in GERMANY
The TÜV and VdS certified firewater barrier consists of one left side U-profile and one right side U-profile as well as a hollow, thermally and mechanically resistant aluminum barrier. When not in use, the barrier is held in the upper position by pneumatic cylinders. The pneumatically controlled, weight-compensated closing of the barrier begins when designated buttons are activated or there ...
-
Manufactured by Ningbo Deling Security Technology Companybased in CHINA
The fire alarm control panel is an important part of the fire alarm system. It is mainly used to receive, display and transmit fire alarm signals, and has the function of issuing control signals. The main functions of the fire alarm control panel are system power supplying, fire alarm signal receiving, and equipment linkage. ...
-
Manufactured by Naffco Fzcobased in UNITED ARAB EMIRATES
The Shield photoelectric smoke detector is designed for residential and commercial residential applications, including homes, apartments, hospitals, hotels and motels, in compliance with UL217, UL1730 applicable IBC/IFC and ...
-
Manufactured by Calectro ABbased in SWEDEN
Uniguard is developed to detect smoke in ventilation ducts and combines a smoke detector and an adaptor system where both venturi pipe and housing are specially designed for optimum airflow through the smoke detector. The UG-7 duct smoke detector housing is designed to comply with the demands in the prEN 54-27 standard. The system fulfills all the requirements for safe fire detection with airflow ...
-
Manufactured by Climatsbased in FRANCE
Environmental chamber to carry out thermal tests on batteries of all types. For these very particular tests on sensitive products, the human safeties as well as products safeties are widely taken into account and solutions are offered according to the risks ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you