Smoke Monitoring Equipment For Monitoring And Testing Available In Nepal
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
ShowcaseManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
This smoke generator was designed to facilitate the observation of air movements and air tracing in many types of air flow situations, primarily in wind tunnels. The unit is easily transported, has a rapid warm up time and simple to set up and use, and produces a controllable, non hazardous smoke effect. The Concept Aerotech Smoke Wand produces a point source of smoke on the end of a 425mm long ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept OPL 100 unit is designed to measure the density of smoke, dust, mist or fog between a given area. The system is low maintenance, double pass, dual beam transmissometer that consists of a transceiver (transmitter / receiver), and a passive retroreflector module. These components are stack mounted which are then interfaced with the control unit. The transceiver produces an ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept Smoke Systems have been producing smoke machines for almost 50 years and have manufactured specific aerosol generators for clean rooms for a majority of that time. We are the most experienced artificial smoke manufacturer in the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept Drain Master is a variant of the best selling Colt 4, it has a reinforced adapter capable of supporting heavy duty ducting. The Drain Master makes identifying leaks in drain work dramatically easier & cleaner. Potentially identifying leaks in minutes, that without the aid of high quality artificial smoke would take hours. Producing a persistent water-based non-toxic smoke. The ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
Our company has developed an on-board smokemeter based on optical method with advantages of small size, cheap price and on-board detection. The optical absorption coefficent covers 0-16m-1, which is able to monitor soot emission of diesel engines in any field. It is compatible with OBD ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Spirit 900 is well suited to applications where continuous, high smoke output is required, since it utilises a continuously rated pump. Like the Concept Colt 4, it generates the most persistent water based smoke of any smoke machine available. Typical water based smoke systems are resistant to temperatures of 35-45°C where as the Spirit 900 using fluid A is still effective when ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Crawler-Truck CPT Penetrometer Rig (lightweight) – Max. 170 kN. The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OWI-430 DSP-WIVIS is the most advanced present weather and visibility sensor ever made. The fully automated instrument provides accurate visibility, present weather and precipitation measurement in a single sensor. This 3rd generation intelligent sensor uses all digital signal processing (DSP) for no-drift high-accuracy results. OSi's patented environmentally adaptive algorithms use ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The “economic” 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The only difference with the “basic” 200 kN CPT crawler is the fact, that the working cabin is made of tarpaulin, as where the “basic” crawler features a working cabin made of insulating sandwich panels. The rig has been designed to execute soil mechanical research ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
OSi's patented Wind Speed and Smoke Sensor (WSS™) makes drift free air flow measurements across the tunnel, calculates true average wind speed, and detects smoke. The WSS-300-DS model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter, smoke, or moisture suspended in tunnel. The WSS-300-DS uses OSi patented optical ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you