Snow Monitoring Equipment For Monitoring And Testing Near Marshall Islands
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50AH Heated Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in air. The SR50AH includes an integrated heater that prevents ice and rime ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS705 is a snowfall adapter that converts a standard 8 in. tipping bucket rain gage to a year-round rain and snow gage. It is typically used with our TE525WS rain gages. The CS705 consists of a 14087 funnel, two band clamps, and the CM270 mounting hardware. The funnel drains the antifreeze/precipitation mixture into a pail. One of the band clamps secures the top of the CS705 to a pole. The ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CCFC Field Camera is a high-quality, high-resolution outdoor zoom video and still image camera specifically designed for remote outdoor observation applications. The camera captures high-quality photos and video in wide-angle, and with 18x optical zoom, under various lighting conditions. Our Field Camera consumes low power, making it ideal for outdoor observation in remote locations using a ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50A Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS230 temperature profiler uses SDI-12 digital technology for simple integration. SDI-12 does away with analog measurement inaccuracies and susceptibility to electrical noise. The CS230 consists of a rigid probe assembly and up to four optional external temperature probes. The rigid probe assembly maintains the precise position of the temperature points within the profile, while protecting ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The WindSonic1 is a two-dimensional ultrasonic anemometer for measuring wind direction and speed. It provides an alternative to traditional mechanical cup and vane or propeller and vane anemometers. This sonic wind sensor outputs an RS-232 signal that can be directly read by a compatible Campbell Scientific data logger. (See the Compatibility section.) The Windsonic1 is not recommended for ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50A-EE is an anodized version of Campbell Scientific's acoustic sensor for measuring the distance from the sensor to the snow surface. The sensor has been designed to operate in extreme environmental conditions where corrosion is a concern (such as coastal regions). The SR50A-EE features an aluminum body that has been treated with a Type III, hard-anodizing process (MIL-A-8625 Type III) ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS231 offers the same precise temperature profiling as our CS230 SDI-12 Temperature Profiler, but with a slimmer design for easier use in borehole and road applications. The CS231 requires a smaller installation hole when compared to the CS230. For road applications, this means easier drilling, as well as less time and material to backfill. The CS231 SDI-12 Temperature Profiler uses SDI-12 ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50AT-L is an acoustic distance sensor that measures the elapsed time between emission and return of an ultrasonic pulse. This measurement can be used to determine snow depth. The SR50AT-L includes an external temperature sensor and outputs a temperature-corrected distance reading, eliminating the need for further post-processing. Note: Campbell Scientific recommends model SR50AT-316SS-L for ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS725 measures snow-water equivalent (SWE) by passively detecting the change in naturally occurring electromagnetic energy from the ground after it passes through snow cover. It is mounted above the ground and has no contact with the snow. As the snow pack increases, the sensor detects the attenuation of the electromagnetic energy from the ground, and SWE can be calculated. The measurement ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The WindSonic4 is a two-dimensional ultrasonic anemometer for measuring wind direction and speed. It provides an alternative to traditional mechanical cup and vane or propeller and vane anemometers. This sonic wind sensor outputs an SDI-12 signal that can be read a a compatible Campbell Scientific data logger. (See the Compatibility section.) The WindSonic4 is not recommended for conditions where ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SDMS40 is a powerful and cost-effective 2D multipoint, laser-based snowfall sensor. In the past, multipoint laser-based snow depth sensors have typically been complex and costly, so the practical SDMS40 was developed to address those issues. Performance and reliability of the device have been proven with thorough testing of the sensor and its measurement method. (Read the white paper.) With ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50ATH is a sonic distance sensor with an integrated external temperature probe and heater. Sonic sensors determine distance by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. The temperature probe allows the SR50AT series to output temperature-corrected values (speed of sound varies with temperature). The integrated heater ...
-
Manufactured by Pacific Data Systems Pty Ltdbased in AUSTRALIA
The Pacific Data Systems All-In-One Weather Station is a simple to use, professional weather observation system using modern measurement techniques to give you fast, accurate updates on your local weather ...
-
Manufactured by Adcon Telemetry - OTT Hydrometbased in AUSTRIA
The OTT Pluvio² is an all-weather precipitation gauge that uses superior weight-based technology to measure the amount and intensity of rain, snow, and hail. Developed in conjunction with industry-leading meteorological services, the OTT Pluvio² employs a high-precision load cell and algorithms that compensate for wind, temperature, and evaporation, ensuring the highest accuracy ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The NILU Particulate Fallout Collector and the NILU Precipitation Collector have been developed to collect representative samples of dry and wetatmospheric particulate fallout for subsequent analysis. The NILU Particulate Fallout Collector and the NILU Precipitation Collector have been developed to collect representative samples of dry and wet atmospheric particulate fallout for subsequent ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The Atmospheric Microplastic Collector has been developed to collect microplastics in deposition, minimizing contamination risks. Innovation nilu’s Atmospheric Microplastic Collector collects representative samples of dry and wet atmospheric particulate fallout for subsequent analysis. The collector is made from stainless steel to avoid contamination from the ...
-
Manufactured by Array Technologies Incbased in USA
Snow accumulation can pose a significant challenge for solar projects. Array SmarTrack™ Automated Snow Response is designed to intelligently manage snow loads, reducing structural requirements and project ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
The GUTERMANN AMI leak detection technology combines the strengths of leak-detection technology from GUTERMANN and established two-way fixed network AMI technology from partnering AMI companies (currently Aclara and Birdz), yielding a more powerful, efficient method of detecting water main leaks. Deployed at regular intervals throughout the water pipeline network (attached to valves via the ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Precise and relaiable ice detection with contact free technology. Ice Detection Sensor to measure icing and freezing rain for various fields of application. The IDS-20 system is setting the standard for the next generation of ice detection systems. The IDS-20 is the first non-contact ice detection system which is able to measure form 0,01mm up to 80mm of ice thickness. The IDS-20 system is an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you