Soil Augers Equipment For Monitoring And Testing Available In Ethiopia
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Regular Augers feature the trusted AMS 3/4" threaded connection and have thicker cutting teeth with stronger welds and extra tungsten carbide hard surfacing. Professional augers are also reinforced with extra gussets welded at both the top and bottom of the bail. The gussets help prevent the bail from bending or twisting when augering into hard or rocky soils, or when the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS professional soil sampling kits are designed for soil sampling professionals who want the strongest, most durable connection on all of their new and imporoved augers, extensions, cross handles, slide hammers, and split-core samplers. They are AMS's newest and most impressive soil sampling kits to date. AMS professional series sampling kits come with 3/4in threaded professional regular auger ...
-
PremiumManufactured by AMS, Inc.based in USA
Save time and energy in soil conditions where soil probes & slide hammers just won’t get the job done! The AMS Compacted Soil Sampler works great for obtaining “composite” soil samples in hard compacted and frozen soils. The 1-1/16” x 21” Flighted Auger with carbide bit may be connected to any ½” chuck drill. The entire unit assembles/disassembles in ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Augering and Extraction Kits for optimal Access Tube installation. Profile Probes are used within access tubes inserted into augered holes in the soil - correct installation is vital for accurate measurement of soil moisture profiles. The goal of installation is to produce optimal contact between the soil and the wall of the access tube. The augered holes should be straight, smooth ...
-
PremiumManufactured by AMS, Inc.based in USA
Reinforced augers are adaptions of our popular regular, mud, and sand augers. They are specially designed for heavy-duty augering. Three additional gussets provide extra strength to help prevent the top of the auger from twisting or bending, allowing these augers to withstand unusual and considerable amounts of power. AMS sand augers use a closed bit design with a restricted opening to prevent ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The spiral auger operates similar to a corkscrew and does not cut off the soil. The auger is usually applied when hard layers need to be penetrated. The spiral auger has a negative end, i.e. the centre of the auger end is whetted away. For profile research (soil mapping) the spiral auger is seldom used. Its use is confined to augering through very hard layers, e.g. boreore, brick layers, chalk ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This design is very suitable for augerings in hard, stiff soils, mixed with fine gravel both above and below the ground water level. The very sharp extremities of the auger bits point at an angle downwards. This design makes the auger go through the soil ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater measurements and collect samples to a depth of 12ft., ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS regular soil augers are designed for use in most soil types. Bits on a regular auger are open to allow entry of small soil clumps and relatively small rocks and particles. Regular augers are used for obtaining disturbed soil samples at or near the surface and for boring to depths where soil samples may be obtained with a separate soil sampler or soil core ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm. The bi-partite root auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating ...
-
PremiumManufactured by AMS, Inc.based in USA
Telescoping soil auger kit setups are 5' 4" long when not extended. They are designed for easy transport and storage, and they come with one (1) 18” Telescoping Cross Handle, one (1) inner extension, one (1) outer extension, one (1) soil auger – regular, mud, or sand – and three (3) snapper pins. The snapper pins are used to lock the cross handle, extensions, and soil auger together. To enhance ...
-
PremiumManufactured by AMS, Inc.based in USA
Signature series Mini Soil Auger Kits are available in 3 1/4' auger size. The 5/8' threaded and Quick Connect kits are available in 2 1/4' or 3 1/4' auger sizes. The stainless steel mini soil auger kit is popular for critical environmental sampling. The Kits Include: One regular and one mud auger, four extensions (3' or 4') and a cross handle, packed in a flexible poly-canvas case for easy ...
-
PremiumManufactured by AMS, Inc.based in USA
2" Multi-Stage Soil Core Sampler Cap, 3/4" ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Planer Auger removes loose soil and other materials from the bottom of an already augered hole. This auger is fitted with a cutting blade on the underside of the auger cylinder. The flat, slotted design of the planer auger's head allows for the auger to remove loose material from the bottom of a borehole in preparation for collection of a soil core sample. The AMS Planer Auger is made ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you