Geonor Soil Monitoring Equipment For Monitoring And Testing Available In Myanmar
-
Manufactured by Geonor ASbased in NORWAY
The piezometer can be pressed down without pre-drilling, normally until approximately 30 m depth. Intended for Ø32 mm extension tube. Adapters to 1' water pipe can be ...
-
Manufactured by Geonor ASbased in NORWAY
M-603 is a special version of M-600 which is open to the atmosphere and equipped with a rubber membrane above the pressure membrane. Compressed air assistance provides a back pressure in order to relieve the pressure membrane. This will balance the back pressure during push-in penetration and the piezometer will be pressed down more quickly. Back pressure can also be used to relieve the membrane ...
-
Manufactured by Geonor ASbased in NORWAY
The Geonor H-70 field inspection vane tester was originally developed in Norway for the special task of preliminary invetigations in soft clays without preboring. It is a comparatively low-cost, still fully professional instrument. The Geonor H-70 allows for safe vane boring down to 10 meters by simple hammering, drilling or pressing. It is a lightweight instrument that can be carried by a single ...
-
Manufactured by Geonor ASbased in NORWAY
The field vane shear test (FVST) is the most widely used method for measuring the undrained shear strength and sensitivity of soft clays in-situ. FVST is a more economic method than for example CPT, as its operation does not require a drilling rig or highly qualified ...
-
Manufactured by Geonor ASbased in NORWAY
The Geonor M-610 scries arc vibrating wire piezometers used for direct burial in embankments and earth/rockfill dams, for placement in boreholes, and for water level monitoring in open wells, tanks, and open bodies of ...
-
Manufactured by Geonor ASbased in NORWAY
The field vane shear test (FVST) is the most commonly used method for measuring the undrained shear strength of soft to stiff clays. For this reason, a preliminary investigation of soft clays with a hand-held vane tester is both economic and fully relevant. It also has good repeatability and is quick in providing valuable information for the planning of more detailed ...
-
Manufactured by Geonor ASbased in NORWAY
The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill a borehole. As with all other Geonor vibrating wire piezometers, the M-600 series offer the maximum reliability available for continuous pore water pressure or ground water level measurements. Geonor *s unique design combined with continued technical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you