Soil Sampling Equipment (Soil Monitoring) Equipment Available In Virgin Islands
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This special type of Edelman auger has an extended auger body (sensitive to torsion) and is suitable only for sampling very soft (clay) ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model C, standard set to a depth of 2 m. For soil sample rings Ø 53 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
You are also fully-mobile in the field with the collapsible fieldcart. The sturdy aluminium construction makes the fieldcart (with inflatable tires) very suitable for carrying all kinds of equipment in the field to a maximum loading weight of 150 kg. The cart is suited to transport packages with dimensions 120 x 56 cm. The cart, when folded (107 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stone catcher: This auger type is used to remove loose stones from the auger ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. The gouge augers have a mutual quality, they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This design is very suitable for augerings in hard, stiff soils, mixed with fine gravel both above and below the ground water level. The very sharp extremities of the auger bits point at an angle downwards. This design makes the auger go through the soil ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
with both halves allows both halves to be pushed into the soil alternatingly. A clamp mechanism on the grip allows the profile to be clamped in the sampler when it is extracted from the soil. A small diameter tube is fitted to break the suction of the sample. The standard set contains, among other items: the peat profile sampler, tools, lever ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Edelman auger, bottom part, combination type, bayonet, Ø 7 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. The sample containing section is sealed off by a plate (fin) that can pivot around the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Geologist hammers can be obtained pointed or with a blade. They are used to obtain a rough indication of the hardness of soil or rock, the removing of fossils, scraping stones, emptying gouges and many other ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
. The correct number of samples per hectare depends, among other factors, on the type of crop, the relief and the type of soil. In case of grassland it is required to take 30 samples per hectare. It is possible to take samples of the top 5 cm (resp. 10 cm) of grass covered areas, for root- and/or fertilization research, quickly ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion hammer (Cobra TT), is standard equipped for drilling to a depth up to 5 meter. The complete set contains: a gasoline driven percussion hammer with accessories and wooden transport box, various extension rods, coupling sleeves, percussion ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The profile sampler allows taking of a sizeable and virtually undisturbed sample up to a depth of approximately 40 cm (10 cm wide and 5 cm across). All roots, up to a cross-section of 2 cm, are included in the sample. When sampling, both U-shaped gutters are pushed alternatingly into the soil, until the required depth is reached, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The set is very suitable for in addition to exploratory soil augering and sampling inserting monitoring well pipes for groundwater level measurements and for sampling. This compact set can be carried easily in a station car and is easy to use in the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Winches are used for lifting and hoisting activities in the field. They are fixed to one of the legs or to the frame of a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
into the soil using a falling hammer. After sampling the sampling tube can be sealed off with the PE covers. A sample on the split sample tube can be prepared for transport by covering it with another split tube and sealing the seams and closing both ends with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you