Soil Sampling Equipment For Monitoring And Testing Available In Hawaii
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The BH 55 gasoline demolition hammer is the entry-level model among demolition hammers. Lighter and smaller than the other demolition hammers in the Wacker Neuson series, its compact size and ease of use make it ideal for sampling ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The breaker hammers are an excellent low-cost tool for taking soil samples. They provide high impact energy to drive the soil sampling tubes quickly into the ground. All hammers though have their own specific tool retainer; this implies that cross-overs are required in order to attach the DPT sounding rods. Gouda-Geo supplies insert hammer heads for the most common breaker hammers on the ...
-
PremiumManufactured by AMS, Inc.based in USA
Use this soil auger to auger and collect soil core samples at the same time. The AMS soil recovery auger is a special dual-purpose tool that allows the user to auger an access hole to a desired depth. After reaching the sampling point, the user may then insert a liner into the soil recovery auger to collect a soil core sample. This versatile soil auger AND sampler can be used for soil profiling, ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sediment or sludge with a technically enhanced core tip and cap. The AMS "valved core tip" fills the sampler without losing the sample upon retrieval. The sampler uses a disposable plastic soil catcher that fits on the end of a 2" x 12" plastic liner. The core tip allows the plastic soil core catcher and liner to fit snuggly over the lip of the core tip. Once the soil core catacher ...
-
PremiumManufactured by AMS, Inc.based in USA
The NEW AMS Replaceable Tip Sand/Loose Sediment Soil Probe is ideal for obtaining unconsolidated soil samples in a 1” x 24” poly liner. The soil probe is equipped with a 1” core catcher which ensures full sample recovery in the proper soil conditions. Probe includes 1” x 24” Probe body, 10” comfortably gripped cross handle, replaceable tip, 1” core ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Frozen Soil Powered Auger Kit was designed to core through those dreaded frozen soil conditions. The Core Barrel Auger is equipped with carbide cutting teeth that are specifically designed to chew through tough frozen soil and pull relatively undisturbed cores inside the barrel. The inside diameter of the sampler is approx. 2in. The slot length on the core barrel allows you to grab ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
When soil sampling and profile description is not required, the drilling procedure can be executed fast and efficiently by applying the lost tip drilling ...
-
PremiumManufactured by AMS, Inc.based in USA
Split Soil Core Samplers are now available with 3/4" threaded and Hex Quick Pin connections! These samplers have a vertically split cylinder (Cup Set) that allows for easy extraction of soil cores that minimize the chance of disturbing the sample. It can be used without a liner to collect relatively undisturbed cores for immediate examination and testing, or with a liner to collect undisturbed ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The piston sampler differs completely in design and application from the augers described before and is very suitable for sampling less cohesive soil layers (sand) below the groundwater table. The piston sampler is also suitable for sampling sediments with a sand ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Casing tube, synthetic (ABS) with steel screw thread sockets, Ø 125 x 108 mm, length 1 m, left hand, coarse round screw thread. Screw thread closes in 2.25 turns and an o-ring seals it for fine sand, weight 6.7 kg. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Standard Method 5 Heated Probe features a 1-inch diameter sheath constructed from corrosion-resistant stainless steel, modular 3/8-inch pitot tip, 1/4-inch stainless steel quick connects, type-K thermocouples for stack and probe temperature, probe heater, orsat line, and a small parts package. Standard lengths are 3 feet to 16 feet. Probes are ordered according to nominal ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by AMS, Inc.based in USA
Use the AMS Split Soil Core Samplers to easily extract relatively undisturbed soil core samples. The split soil core sampler has a vertically split cylinder. You can use the split soil core sampler without a liner to collect relatively undisturbed soil cores for immediate field examination and testing. Or, it can be used with a liner for collection of relatively undisturbed, sealed soil core ...
-
PremiumManufactured by AMS, Inc.based in USA
Reinforced sand augers feature a closed bit design with a restricted opening to prevent the loss of the sampled material during retrieval. They are more reliable in loose, unconsolidated soil ...
-
PremiumManufactured by AMS, Inc.based in USA
The Shaw portable core drill is a nearly ideal tool for environmental and geotechnical field investigation because it can be used in otherwise difficult of access locations behind buildings, fences and walls, trees, escarpments and much else. The diamond core bits of the system are easily capable of advancing borings through a large array of subsurface materials including steel reinforced ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The shear test apparatus (art. no. 08.68) measures the shear stress of an undisturbed soil sample. During the measurement soil water matrix, compression stress and vertical displacement are simultaneously measured. The shear test apparatus is operating computer controlled using multifunctional software for executing measurement protocols and visualised data presentation. The samples are taken in ...
-
PremiumManufactured by AMS, Inc.based in USA
Save money by repairing your own regular, sand or mud auger bits. These must be welded on to your current auger. Your warranty is void after welding the first set of replacement bits on yourself. AMS is not responsible for damages caused by poor ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
These high-quality trays offer five compartments for the storage and transport of soil samples. Constructed with sturdy and durable anthracite grey (recycled) plastic with integrated reinforcements. The storage trays come complete with a lid in order to keep the soil samples well preserved and organized. The lids are corrugated facilitating vertical stacking. The trays are easy to clean and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you