Soil Shear Testing Equipment For Monitoring And Testing Available In Madagascar
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Pocket vane tester for measurement up to 250 kPa (2,5 kg/cm2). The pocket vane tester is a shear strength measuring tool that is used in profile pits or on the surface. The small, practical format also makes the tool very suitable for testing on soil samples. The short period of time the test takes allows for several measurements in the same soil or layer which in turn allows for the calculation ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems worldwide soil deformation is a major problem arising from increasing land use intensity. Altered soil functions, in particular reduced hydraulic conductivities and impeded aeration, influence the top soil layers. This has an important effect on vulnerability to erosion, in particular. Assessing very thin soil layers like soil crusts requires very sensitive and highly ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Determination of the shear strength of a soil is a commonly used method to determine the structural strength of that soil. The electric vane tester is an excellent field instrument for in-situ measurement and evaluation of the undrained shear strength (su) and the remoulded shear strength. Furthermore it gives a good indication of the over-consolidation ratio, the stress-strain relationship and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Drilling a bore hole is often combined with sampling and describing a profile. If both these activities are not necessary during the drilling procedure then drilling can be executed fast and efficient applying the so-called lost cone drilling method. Eijkelkamp Soil & Water developed a manually controlled set using an electrical percussion hammer to hammer the lost cone and the accompanying ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Soil sampling is simple and inexpensive tool for both geotechnical and environmental soil investigation. It easily returns your investment many times over. The window type soil samplers are driven into the soil by means of the penetrometer pushing rig. The samplers come standard with M22 threaded connections and can be connected to the CPT sounding tubes by means of an cross-over tube. Since the ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by AMS, Inc.based in USA
Take direct readings of shear strength to depths up to 10 ft (3 meters) in soft to stiff clays. Three (3) vane sizes allow for the direct determination of un-drained shear strength of soft to stiff clays. The peak vane value is determined by a calibrated scale ring built into the head assembly. The cross handle is used both to push the vane to the desired test depth and apply the shearing torque. ...
-
Manufactured by BAUER Foundation Corp. (BFC)based in USA
In general, undisturbed ground has sufficiently high compression strength, but only low tensile and shear strength. Soil nailing is a construction technique which is applied to increase and/or maintain the stability of soil mass by installing reinforcing bars or soil ...
-
Manufactured by Envsin Instrument Equipment Co., Ltd.based in CHINA
Suitable for aerospace, petrochemical industry, machinery manufacturing, metal materials and products, wire and cable, rubber, paper and plastic color printing packaging, adhesive tapes, bags handbags, textile, food, pharmaceutical and other industries. To test the physical properties of the various materials and finished products, semi-finished products, choose a variety of fixture to do ...
-
Manufactured by Best Project Material (BPM) Geosynthetics Co., Ltdbased in CHINA
Steel plastic geogrid mesh is made from high strength steel coated with virgin polyethylene or high density polyethylene by special ultrasonic welding and composite processing technology. Steel plastic geogrid is weld into longitudinal and latitudinal staggered intervals in the same planner, different wire mesh diameter and root number can be fabricated according to project reinforcement force ...
-
Manufactured by North American Greenbased in USA
North American Green RollMax Systems’ temporary and permanent EroNet Erosion Control Blankets (ECBs) incorporate polypropylene nettings along with a fiber matrix. The temporary EroNet erosion control blanket products use photodegradable nettings which are ultimately broken down by the sun’s ultraviolet rays. They can be used in a variety of soil stabilization applications including ...
-
Manufactured by North American Greenbased in USA
North American Green RollMax Systems’ permanent Turf Reinforcement Mats (TRMs) are ideal for high-flow channels, stream banks, shorelines and other areas needing permanent vegetation reinforcement and soil stabilization protection from water and wind. More economical and aesthetically pleasing than rock riprap, articulated concrete blocks or poured concrete, North American Green’s ...
-
Manufactured by EIE INSTRUMENTS P.LTDbased in INDIA
A system of loading which causes section of a bar or shaft to rotate about its central longitudinal axis relatively to another such section and which thus produces twist or torsion in the bar, constitutes a torsional load. The load may be composed of forces acting in any direction but the twisting or torsional affect is provided by the couples formed by these forces in planes normal to the ...
-
based in USA
Dry soil mixing is a ground improvement technique that improves the characteristics of soft, high moisture content clays, peats, and other weak soils, by mechanically mixing them with dry cementitious binder to create soilcrete. To construct columns, a high speed drill advances drill steel with radial mixing paddles located near the bottom of the drill string. During penetration, the tool shears ...
-
Manufactured by ACE Geosyntheticsbased in USA
ACETex PET are engineered woven geotextiles fabricated with high tenacity and high molecular weight polyester (PET) yarns. ACETex PET geotextiles have high tensile strength at very low strain for soil reinforcement applications including soft soil stabilization, base reinforcement, embankments on soft soils and working platforms, ...
-
Manufactured by Geocomp, Inc.based in USA
The ShearTrac III system can perform the consolidation and shearing phases on large size samples under fully automatic control. It is an intelligent shear and load frame combination allowing both vertical and horizontal load and displacement applications. The system incorporates high load capacity motor systems (micro-stepper or servo) that offer superior precision and ...
-
Manufactured by TENAX Group / TENAX Spa / TENAX Corporationbased in ITALY
TENAX TT geogrids are manufactured by extruding and mono-directional drawing of high-density polyethylene (HDPE) grids. This technology produces products having important technical properties that permit their usage in structural applications.TENAX TT geogrids, being chemically inert and having a high tensile strength and modulus are specifically produced for the reinforcement of ...
-
Manufactured by The Best Project Material Co.,LTDbased in CHINA
Make reinforcement treatment for varions kinds of soft soil foudation and strengthen shearing resistance of the soil body ,used in reinforcement of retaining wall and widening of old ...
-
Manufactured by Omnimetrixbased in CANADA
Dynamic Cone Penetrometers is a low-cost, efficient test method to determine quickly in-situ CBR values of pavement base, sub base and sub grades. They are primarily used to determine in-place soil shear strength in road construction with CBR values from less than 0.5 to 100% and bearing values ranging from 430 to 10,800 psf , can be used for depths from 30 inches to 6 foot with optional drive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you