Soil Shear Testing Equipment For Monitoring And Testing Available In Tennessee
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Soil sampling is simple and inexpensive tool for both geotechnical and environmental soil investigation. It easily returns your investment many times over. The window type soil samplers are driven into the soil by means of the penetrometer pushing rig. The samplers come standard with M22 threaded connections and can be connected to the CPT sounding tubes by means of an cross-over tube. Since the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Pocket vane tester for measurement up to 250 kPa (2,5 kg/cm2). The pocket vane tester is a shear strength measuring tool that is used in profile pits or on the surface. The small, practical format also makes the tool very suitable for testing on soil samples. The short period of time the test takes allows for several measurements in the same soil or layer which in turn allows for the calculation ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Drilling a bore hole is often combined with sampling and describing a profile. If both these activities are not necessary during the drilling procedure then drilling can be executed fast and efficient applying the so-called lost cone drilling method. Eijkelkamp Soil & Water developed a manually controlled set using an electrical percussion hammer to hammer the lost cone and the accompanying ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by AMS, Inc.based in USA
Take direct readings of shear strength to depths up to 10 ft (3 meters) in soft to stiff clays. Three (3) vane sizes allow for the direct determination of un-drained shear strength of soft to stiff clays. The peak vane value is determined by a calibrated scale ring built into the head assembly. The cross handle is used both to push the vane to the desired test depth and apply the shearing torque. ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Determination of the shear strength of a soil is a commonly used method to determine the structural strength of that soil. The electric vane tester is an excellent field instrument for in-situ measurement and evaluation of the undrained shear strength (su) and the remoulded shear strength. Furthermore it gives a good indication of the over-consolidation ratio, the stress-strain relationship and ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems worldwide soil deformation is a major problem arising from increasing land use intensity. Altered soil functions, in particular reduced hydraulic conductivities and impeded aeration, influence the top soil layers. This has an important effect on vulnerability to erosion, in particular. Assessing very thin soil layers like soil crusts requires very sensitive and highly ...
-
by ConeTecbased in CANADA
All ConeTec cones and data acquisition systems are built seismic ready. The addition of geophones in the CPTu body enables the collection of seismic wave data, and the calculation of shear (Vs) and compressional (Vp) wave velocities during the cone penetration ...
-
Manufactured by Cofra B.V.based in NETHERLANDS
Cofra has started with the application of Geotextile Encased Columns when former Mobius sections, in the past the market leader in the installation of GEC, were acquired by our parent company Boskalis. Due to our strong relationship with Huesker Cofra has become one of their preferred installers to install the GEC columns on every location in the ...
-
Manufactured by TMP Geosynthetics - Taian Modern Plastic Co., Ltd.based in CHINA
Engineered for soil stabilization applications to help improve the performance of standard construction materials and erosion control ...
-
Manufactured by Humboldt Mfg. Co.based in USA
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, sub base and sub grades. DCPs are primarily used to determine in-place soil shear strength in road construction with CBR values from less than 0.5 to 100% and bearing values ranging from 430 to 10,800 psf. They can ...
-
Manufactured by Humboldt Mfg. Co.based in USA
For use by field personnel to check visual classification of soils. Verifies whether excavation side walls require shoring, based on OSHA cohesive soils classifications. Indicates consistency, shear strength, and approximate unconfined shear strength. Direct-reading scale—in tons/sq ft, or kg/sq cm—corresponds to equivalent unconfined compressive strength. Indicator sleeve retains ...
-
Manufactured by Envirolok LLCbased in USA
Slope failures are often a result of weather events, poor soil structures, poor drainage and/or land use. Each of these influences can lower the soil’s ability to resist shearing, leading to slope instability. The two most common types of slope failures are rotational failures and creep failures. Rotational failures typically occur in silt or clay soils and are indicated by curved cracks, ...
-
Manufactured by C-Tech Laboratory Equipment Co.,ltdbased in CHINA
The Field Inspection Pocket Vane Tester 16-T0174 is especially designed to measure the in situ undrained shear strength in clays. The instrument consists of a T-handle cylindrical body where a torsional spring is housed, and three interchangeable vanes of different sizes, used depending to the expected strength of the soil to be tested. The height/diameter ratio of all vanes is ...
-
Manufactured by Geoquip Marine Operations AGbased in SWITZERLAND
The PS suspension logger measures compression wave velocities and formation shear velocities of surrounding rock and soil from within deep uncased boreholes. This is used to determine the physical properties of soil and rock including shear modulus, bulk modulus, compressibility and Poission’s ...
-
Manufactured by ACE Geosyntheticsbased in USA
ACETex PET are engineered woven geotextiles fabricated with high tenacity and high molecular weight polyester (PET) yarns. ACETex PET geotextiles have high tensile strength at very low strain for soil reinforcement applications including soft soil stabilization, base reinforcement, embankments on soft soils and working platforms, ...
-
Manufactured by Geocomp, Inc.based in USA
The ShearTrac III system can perform the consolidation and shearing phases on large size samples under fully automatic control. It is an intelligent shear and load frame combination allowing both vertical and horizontal load and displacement applications. The system incorporates high load capacity motor systems (micro-stepper or servo) that offer superior precision and ...
-
Manufactured by TENAX Group / TENAX Spa / TENAX Corporationbased in ITALY
TENAX TT geogrids are manufactured by extruding and mono-directional drawing of high-density polyethylene (HDPE) grids. This technology produces products having important technical properties that permit their usage in structural applications.TENAX TT geogrids, being chemically inert and having a high tensile strength and modulus are specifically produced for the reinforcement of ...
-
Manufactured by The Best Project Material Co.,LTDbased in CHINA
Make reinforcement treatment for varions kinds of soft soil foudation and strengthen shearing resistance of the soil body ,used in reinforcement of retaining wall and widening of old ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you