Solvent Monitoring Equipment For Monitoring And Testing Near Newfoundland
-
Manufactured by Kitagawa America LLCbased in USA
801 is designed for sampling organic solvents in environmental air, particularly for polar solvents such as Methanol and Acetone which cannot be sufficiently adsorbed onto charcoal. Organic solvent vapour is adsorbed onto the silica gel while passing through the tube. Adsorbed solvent is recovered with a desorption solvent followed by gaschromatographic analysis. When sample air corresponding to ...
-
Manufactured by Kitagawa America LLCbased in USA
800B is designed for sampling and measurement of organic solvents in air with personal sampler for industrial hygiene (conformed to NIOSH requirements). Sample air containing vapour of organic solvents is passed through a glass tube packed with charcoal which adsorbs the solvent. Adsorbed solvent is recovered with desorption solvent leeching followed by gaschromatographic analysis. Useful for ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The AcuPro is an industrial strength analyzer for continuous measurement of flammable and some combustible vapors, from 0% to 100% of the Lower Flammable Limit ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 200deg;C - 392deg;F. The Model SNR674 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR674 to sample low oxygen and inert ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 270°C - 518°F. The Model SNR675 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR675 to sample low oxygen and inert ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 60°C - 140°F. The Model SNR671 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR671 to sample low oxygen and inert ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 120°C - 248°F. The Model SNR672 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR672 to sample low oxygen and inert ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
The Shimadzu Prominence high-performance liquid chromatograph (HPLC) achieves an exceptional level of performance, reliability, and economy. Prominence HPLC covers a wide variety of flow rates and application goals. Prominence is expandable to support a diverse range of applications: Multiple solvent delivery options, a broad range of flows, and isocratic or gradient elution. Numerous detector ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
ICPE-9800 Series of simultaneous ICP atomic emission spectrometers are next-generation systems that offer the superior accuracy necessary to simultaneously and quickly analyze multiple elements regardless of their concentration levels. They also feature user-friendly software that makes analysis easy. Furthermore, the systems reduce analysis costs while providing the highest performance levels in ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
Headspace Autosampler for Routine, Simplified Analysis featuring the high quality and value you have come to know from Shimadzu ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
The most powerful Multimode inlet for GC and GCMS systems. The 4th generation of the OPTIC multimode injection system is a versatile accessory for Shimadzu GC and GCMS instruments that extends the application range and detection ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
UniSolv® for Organic Trace Analysis - Large retention time range (even low-boiling substances can be reliably detected) - Highest possible purity and minimal signal-to-noise ratio - Best possible batch consistency avoiding analysis repetition, time and cost saving - Specified for GC-Electron Capture Detector (ECD), GC-Flame Ionization Detector (FID) and Mass Spectroscopy (MS) No matter which ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
Manufactured by Waters Corporationbased in USA
The consistency of the Alliance HPLC System gives you exceptional confidence in your analytical results, day-to-day and year-to-year. Get accurate and reproducible results with Waters' flagship HPLC technology, which provides consistent and reliable performance whether your Alliance HPLC System is newly manufactured, or you're working on one that is several years ...
-
Manufactured by Agilent Technologies, Inc.based in USA
The Agilent 5110 ICP-OES has been discontinued. The 5110 ICP-OES has been superseded by the new smart 5800 and 5900 ICP-OES instruments that are designed to help reclaim wasted time, reduce sample remeasurement and give you the edge over your ...
-
Manufactured by Waters Corporationbased in USA
Easily More Sensitive, Just Turn the Key. With an ionKey/MS System, Waters transforms what your lab can do. By integrating the UPLC separation into the source of the mass spectrometer ionKey/MS gives you: Increased sensitivity, Simplified user experience, The power to perform multiple analyses on limited sample volumes, The power to analyze smaller sample sizes, Reduced solvent ...
-
Manufactured by CTC Analytics AGbased in SWITZERLAND
Reproducible results thanks to optimized injection handling. Only perfect injection handling gives reproducible results. The PAL LSI is designed for the precise and accurate handling of liquid samples of up to 100 μL in volume. In combination with the PAL Sample Control software all parameters of aspirating and dispensing of liquid samples can be fully controlled. This is crucial for perfect ...
-
Manufactured by RKI Instruments, Inc.based in USA
A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The OCMA-500 Oil Content Monitor has been redesigned for even better operability, maintaining its user-friendly features.After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample measurement and draining. This machine is easy for anyone to use.The OCMA-500 cuts solvent consumption by 20% compared with our previous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you