Sonar Equipment For Monitoring And Testing Available In Saudi Arabia
-
ShowcaseManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The Falmouth Scientific HMS-624 Side Scan Sonar System utilizes advanced technology to provide superior imaging capabilities for deep and shallow water ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments require multiple frequency bands to support a wide variety of survey requirements. The HMS-622 CHIRPceiverTM and its Family of Transducer Arrays and Vehicles can fill this wide range of survey needs. The frequency bands supported by the HMS-622 include standard LF (1KHz- 10KHz), and optional ULF (200Hz-2KHz) and HF (8KHz- 23KHz). It can be ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments in shallow water environments require compact tools as well as multiple frequency bands to support a variety of survey requirements. The HMS-621 CHIRPceiver LittTM and transducer arrays fill this wide range of survey needs. The user selectable frequency bands supported by the HMS-621 include standard LF (1KHz-10KHz), or HF (8KHz-23KHz). It ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
FSI has been designing and manufacturing precision sensors, sonar systems, and transducers for the oceanographic community since it was founded in 1989, and has extensive experience in building complex transducer elements and arrays for government and commercial customers around the ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-ATTR-15K is a very rugged, high power, underwater transducer specifically designed for marine sub-bottom profilers and echo-sounders in the 8 to 23 kHz frequency range. The transducer is designed for operation in a variety of configurations to support shallow water surveys to deep water hull mounted arrays capable of operation in survey depths up to 6Km. Vessel installations will vary ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 0.5 ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-665 Multi-Sonar Tow System is designed for applications that require high resolution side scan and sub-bottom imagery in depths of up to 3,000m. This combined side scan and sub-bottom survey tool offers a fully digital platform capable of collecting high resolution Klein powered side scan with FSI HMS-621 sub-bottom data, as well as a range of customer selected sensor data. The long ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 1 ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed a professional version of Motion Reference Units (MRU-PD) to meet the requirements from marine and hydrographic applications. The MRU-PD is an enhanced, high-performance strapdown Motion Sensor - affordable solution for survey, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The CSW-7 is an electric winch designed for use in oceanographic and geophysical research. This model is capable of lifting and lowering most small instrumentation payloads, while remaining light enough for four people to transport. It has a drum capacity of 1000 m of 0.25' cable. A slip ring adapter can be added to accommodate Mercotac slip rings or Klein sonar (modified Focal Technologies 180) ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-650 is a very rugged, high power, underwater transducer specifically designed for marine sub-bottom profilers and echo-sounders. The transducer is designed to operate in the 200Hz to 2kHz frequency range. The transducer is suitable for operation in a variety of array configurations to support shallow water sub-bottom profiling applications. Single transducers can support up to 3000W power ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-ATTR-4.5K is a very rugged, high power, underwater transducer specifically designed for marine sub-bottom profilers and echo-sounders in the 2 to 7 kHz frequency range. The transducer is designed for operation in a variety of array configurations to support shallow water surveys to deep water hull mounted arrays capable of operation in survey depths up to 10Km. Vessel installations will ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed Motion Reference Units (MRU) to meet requirements from marine and hydrographic applications. MRU is enhanced, high-performance strapdown Motion Sensor, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it is ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-625 Multi-Sonar Tow System is designed for applications that require high resolution side scan and sub-bottom imagery in depths of up to 3,000m. This combined side scan and sub-bottom survey tool offers a fully digital platform capable of collecting high resolution Klein powered side scan with FSI HMS-621 sub-bottom data, as well as a range of customer selected sensor data. The long ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic compact echo sounder in 2- and 3-wire version for non-contact measurement of distance, level, empty space or volume. Parameters can be set directly on site without the need to open the ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The range of our non-contact radar and ultrasonic level measurement systems comprises radar and ultrasonic sensors and meters. The ultrasonic sensors range from the i-Series sensors, the NivuCompact echo sounder to the P-Series sensors and the OCL air-ultrasonic sensor. The R-Series operates with radar ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Series 10031-M Multi-Purpose Hydrographic Winch is compact and portable, engineered for long-term durability, and reliability necessary for towing geotechnical equipment such as side-scan sonars, sub-bottom profilers, and magnetometers. It is also used for geophysical applications such as sediment sampling and coring, in addition to hydrographic work including CTD and sound velocity ...
-
PremiumManufactured by General Oceanics Inc.based in USA
WINCH, ELECTRIC PORTABLE 45-100KG The CSW-6 has proven to be a versatile winch which may be used in almost any application. This winch comes as a complete package, including a range of standard features only available as options on our other winches. Typical uses: side scan sonar, water sampling, towed bodies, environmental and pipe line monitoring, coring, subsea video, CTD ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The BPA-622 Dual Array is configured with two transducer arrays (low and high frequencies) and an integrated hydrophone array. The combined transmit and receive beam pattern of the BPA-622 is 80 in the forward and aft direction and 32 athwart for the low frequency array, and 120 beam in the forward and aft directions and a narrow, 9 beam athwart for the high frequency array. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you