Only show results in Virginia? Ok

Source Sampling Equipment (Source Sampling) equipment

  • Premium

    HI-Q - Dry Gas Totaling Meters

    HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Air Sampling Accessories Product line

  • Premium

    Model 12.14 - Motorized Foot Valve Pump Set

    Among other items the standard set contains a foot valve pump suitable for two pumping tubes, tube guides, ball valves, polyethylene tube and an aluminium tripod. The revolutionary PowerPack PP1, a borehole sampling system for groundwater and leachate, is light enough to be carried by one person. It’s powerful enough to lift water from 50 m ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Water(-Bottom) Sampling Equipment Product line

  • Method 16A Sampling Sytem

    Method 16a - Determination of Total Reduced Sulfur Emissions from Stationary Sources. This manual method has been replaced by more automated systems in the U.S., but is still frequently requested from samplers outside the U.S. so we have decided to provide a listing of the component pieces needed for this system.

    By Keika Ventures, LLC (KV) based in Chapel Hill, NORTH CAROLINA (USA). from Source Sampling and Monitoring Equipment Product line

  • Premium

    Pinger - Model BFP-312 - Bottom Finding Benthos

    195 dB source level 12 KHZ Bottom Finding Pinger used in conjunction with a standard 12KHZ shipboard bathymetric recorder to monitor height off the bottom of instruments or sampling equipment being lowered through the water column.

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Air Sampling Product line

  • Apex Instruments - Model XC-260 - Manual Mercury Audit Source Sampler

    The XC-260 Hg Source Sampler is designed for performance testing, base line studies, and profiling.  This low-cost, portable, and field-proven audit system is easy to learn and use, and is ideal for sampling mercury emissions based on Reference Method 30B of the U.S. EPA Appendix K, 40 CFR, Part 60. The XC-260 Hg Audit System is used for ...

    By Apex Instruments, Inc. based in Fuquay-Varina, NORTH CAROLINA (USA). from Mercury and Gas Sampling Equipment Product line

  • Model DDS - Gas Sampling Systems

    DDS is equipped with a membrane pump, a precision flow meter and a dry gas meter. The two streams are regulated independently, so the dilution ratio should be changed to satisfy different stack conditions. The temperatures inside the dry gas meter are read by 2 digital thermometers. The DDS system assembles in a single rack the sampler and the ...

    By Tecora, a division of Omnisense Technologies based in Fontenay sous Bois Cedex, FRANCE. from Emission Monitoring - Source Testing Product line

  • Apex Instruments - Model XC-563 - Source Sampling Console

    Apex Instruments Model 563 Source Sampling Console is the digital equivalet to the XC-522 and XC-572; featuring an AP25 Dry Gas Meter with optical encoder and digital totalizer. The console also features differential pressure tranducers for Delta P and Delta H. The temperature controllers, thermometer and timer all have digital displays. All ...

    By Apex Instruments, Inc. based in Fuquay-Varina, NORTH CAROLINA (USA). from Gas Analysis Equipment - ECOM Instruments Product line

  • Scentroid - Model DR300 - SAMPLING DRONE

    Scentroid DR300 Sampling drone adds a new dimension to air sampling. The DR300 Sampling drone can be used to sample ambient air at heights of up to 125 meters above ground level or directly sample from stack plumes. Height sampling and direct plume sampling opens a new avenue that can be used to increase accuracy of emission and impact ...

    By Scentroid, a Division of IDES Canada. based in Stouffville, ONTARIO (CANADA). from Sampling Equipment Product line

  • Scentroid - Model SW60 - Wind Tunnel Sampler

    The Scentroid SW60 is the next generation Wind Tunnel Sampler (AKA Ventilated Sampling Hood), used for sampling on solid or liquid surfaces with passive odour emissions in accordance with the EN13725 and VDI3880. The SW60 Wind Tunnel Sampler offers a number of unique features that make it the most accurate and user friendly area source sampler in ...

    By Scentroid, a Division of IDES Canada. based in Stouffville, ONTARIO (CANADA). from Sampling Equipment Product line

  • 12 Volts Low Flow Controller

    Especially designed to progressively vary in a precise controlled way the voltage supplied to a 12 volts submersible pump. The controller uses a 12 volts power’s source and provides an output in the range 0 to 12 V by means of simple rotary dial. Portable and entirely weatherproof, the 12 volts Controller « Low flow » allows to ...

    By Silex International based in St Antoine, FRANCE. from Sampling & Measurement Equipments Product line

  • Olfasense - Non-ventilated sampling hood

    This hood allows defined sampling of flow area sources with very low discharge speeds (e.g. biofilters and ventilated compost piles).The volume of the exhaust air flow is guided through the hood and the chimney, and is consolidated.The sampling hood has a base surface area of 1m2 and a chimney with a diameter of 150mm.It is easy to transport, as ...

    By Olfasense Group based in Amsterdam, NETHERLANDS. from Odour, VOC and gas sampling equipment Product line

  • Olfasense - Ventilated sampling hood

    The ventilated sampling hood is used primarily for sampling non-ventilated, odour-emitting solid or liquid area sources. When sampling liquids, floats are attached to the sides of the hood.The hood itself is automatically ventilated by two radial fans with a constant volumetric flow. The inlet fan sucks in outside air via an exchangeable orifice ...

    By Olfasense Group based in Amsterdam, NETHERLANDS. from Odour, VOC and gas sampling equipment Product line

  • 4-Way Cuvette Holder For 1-cm Cuvettes

    The CUV-ALL-UV 4-way Cuvette Holder for 1-cm path length cuvettes is equipped with fiber optic couplings at each of four quartz f/2 collimating lenses, which couple to optical fibers to either read or illuminate the sample. When used with Ocean Optics modular spectrometers and light sources, CUV-ALL-UV Cuvette Holders can measure absorbance, ...

    By Ocean Optics - a Halma Company based in Dunedin, FLORIDA (USA). from Sampling Accessories Product line

  • Transmission Dip Probes for Hostile Environments

    The TP300-UV-VIS Transmission Dip Probe couples to our spectrometers and light sources to measure the absorbance and transmission of solutions in harsh environments. The TP300-UV-VIS Probe is a chemically inert PEEK transmission probe that can be equipped with a tip (RT-PH) for mounting transmissive films in the optical path. Light is directed via ...

    By Ocean Optics - a Halma Company based in Dunedin, FLORIDA (USA). from Sampling Accessories Product line

  • Solinst - Model 429 - Point Source Bailer

    Point source sampling is ideal for obtaining high quality, representative samples of groundwater from specific depths. It allows the collection of water that has just flowed into a well at the desired sampling point. This can avoid purging and disposal of purged water.

    By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Groundwater Samplers Product line

  • Felix IsoKenetic - Stack Train IST Sampler

    IST Method 5 sampler systems are manufactured to conform with the construction design criteria and specifications cited in US EPA Method 5, Code of Federal Regulations (40CFR Part 60) and APTD-0581 Document. Our source sampler consoles allow operators to monitor gas velocities, temperatures, pressures and sample flow rates in order to maintain ...

    By Felix Technology Inc. based in Concord, ONTARIO (CANADA). from Environment Equipment Product line

  • Felix - Air Quality - CO Analyzer Measures Carbon Monoxide

    CO Analyzer measures carbon monoxide by passing infrared light through sample and determining the absorbed energy and then compare this to that absorbed by a reference gas. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present.

    By Felix Technology Inc. based in Concord, ONTARIO (CANADA). from Environment Equipment Product line

  • Sper Scientific - Model 300006,11 - Salt Refractometer

    Sper Scientific portable refractometers work in ambient light with no battery or other power source necessary. A refractometer measures the extent to which light is bent (refracted) through a liquid sample. They are commonly used to help identify or confirm the identity of a sample, assess the purity of a sample, or determine the concentration of ...

    By Sper Scientific based in Scottsdale, ARIZONA (USA). from Lab Equipment - Refractometer Product line

  • Sper Scientific - Model 300006,11 - Salt Refractometer

    Sper Scientific portable refractometers work in ambient light with no battery or other power source necessary. A refractometer measures the extent to which light is bent (refracted) through a liquid sample. They are commonly used to help identify or confirm the identity of a sample, assess the purity of a sample, or determine the concentration of ...

    By Sper Scientific based in Scottsdale, ARIZONA (USA). from Lab Equipment - Refractometer Product line

  • Isokinetic / Wet Chemistry Sampling System

    Air Hygiene operates over 15 isokinetic source sampling systems with an extensive accessory cache, including over: 30 deluxe glassware sets, 40 heated filter box/impinger case assemblies, 6 Method 201a PM10 – PM2.5 particle sizing cyclones, Vast collection of probe types ranging in length from 1 to 22 feet

    By Air Hygiene International, Inc. based in Broken Arrow, OKLAHOMA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you