Spectrometry Applications

18 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Spectrometry ×

Plasma Characterisation

by Hiden Analytical     based in Warrington, UNITED KINGDOM

Hiden plasma probes measure some of the key plasma parameters and provide detailed information relating to plasma reaction chemistry. Plasma diagnostics for applications in etching, deposition, coating and surface modification. ECR – Electron Cyclotron Resonance plasma Magnetron sputtering High power impulse magnetron sputtering, HIPIMS ICP inductively coupled plasma, and RF plasma Dielectric-barrier discharge (DBD)

X-ray fluorescence for environmental research

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical tasks.

Integrated real-time gas analysis solution for specialty gases industry

by CIC Photonics, Inc.     based in Albuquerque, NEW MEXICO (USA)

CIC Photonics’ extensive experience with gas analysis has also included what the industry refers to as Specialty Gases, as distinguished from Semi Gases, Electronic Specialty Gases, and Industrial Gases. Specialty Gases are high purity gases used across many applications by researchers, by government agencies, and by commercial businesses. Included among these users and applications are: hospitals for medical gases; environmental labs and testing companies for blends of protocol gas mixtures; calibration gases; spectroscopy standards; gas composition measurements and confirmations; and others.

Measurement solution for soil chamber gas flux

by Protea Limited     based in Middlewich, UNITED KINGDOM

Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem.

Lubricating oils for oil & gas industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Lubricating oils contain chemical additives that give the oil a greater in-service life. These additives contain a range of elements such as Calcium, Zinc, Phosphorus, Magnesium, Chlorine, Molybdenum etc whose concentration need to be measured as part of a quality control/assurance system to demonstrate conformance to specification.

Aerosol and particle technology for process control industry

by Palas GmbH     based in Karlsruhe, GERMANY

In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

Classification and identification of recyclable material

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics` state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling industry.

Mass Spectrometer for air consultancy

by Custom Stack Analysis, LLC.     based in Alliance, OHIO (USA)

Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

Integrated real-time gas analysis solution for electronic specialty gases industry

by CIC Photonics, Inc.     based in Albuquerque, NEW MEXICO (USA)

The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each year after that the industry tightened its requirements such that today the moisture specifications are 1 to 5 ppb or better.

Aerosol and particle technology for pharmacy industries

by Palas GmbH     based in Karlsruhe, GERMANY

In the field of inhalation research it is necessary to characterize unambiguously the inhalable aerosols regarding particle size distribution and concentration.

Aerosol and particle technology for pressure & temperature industries

by Palas GmbH     based in Karlsruhe, GERMANY

The reproducibility of the devices has been approved by worldwide use. In order to avoid the condensation or vaporization of the particles during the particle measurement, the isothermal and isobaric particle generation and measurement is necessary.

Raman Spectrometry for the Oil & Gas Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Increasing regulations and specifications for fuel quality, compliance and the need to detect calamities as quickly as possible underlined the importance of on-line analyzers. Since more than 10 years AppliTek has acquired a considerable expertise in the advice, design and implementation of on-line analyzers and complete monitoring systems in the oil and gas sectors. These systems are built by specialists with a proven track record in oil processing and refining and know where your expectations lie. A growing portfolio of products and turnkey solutions is your key to higher production efficiency, cost control and finally your competitive advantage.

New technologies such as Raman spectrometry pave the way to new monitoring systems for quality control and process control.

FT-NIR spectroscopy for the biofuels industry

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

FT-NIR spectroscopy is a widely used technique that can do rapid and non-destructive measurements in seconds. This technique can achieve multiple analysis results per measurement and determine real–time chemical information at-line and in-line.

Waste Sorting - Commercial Waste Sorting / Industrial Waste Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Traditional manual or semi-automated techniques, however, are only able to recover low levels of separate materials from commercial and industrial waste streams. In contrast, TOMRA’s fully adjustable, state-of-the-art, senor-based sorting and recycling systems convert complex and varied commercial and industrial streams into high quality, separated output. The systems also make manual picking unnecessary, thus reducing labor costs and material loss, while increasing the efficiency of commercial waste recycling. Operationally, through using detection techniques such as near infrared (NIR), x-ray transmission (XRT), visual spectrometers (VIS), color line cameras and metal sensors in combination, the systems offer: - High recovery rates - High throughputs - High purity levels - Speedy return on investment - Low running costs - Advanced recognition capabilities (material, color, atomic density etc)

Need help finding the right suppliers?

Let the XPRTs do the work for you