Spectroscopy Applications available in Montana
-
Premium
Machine condition monitoring for rail fleet
Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the transportation industry. An effective oil analysis program will keep important transportation industry assets such as engines in gearboxes in trains, buses and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
FT-NIR analysis for measuring meat products sector
According to the Organization for Economic Co-operation and Development, worldwide consumption of beef, poultry, and pork will exceed a combined 308 million tons in 2018. Additionally, Newsweek reports, "Over the last 50 years, the average amount of meat eaten per person globally has almost doubled, from around 50 pounds in 1961 to 94 pounds in ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
FT-NIR analaysis for snack food industry
The snack food industry includes products like potato chips, popcorn, crackers, nacho & tortilla chips, nuts, and snack bars. It is a growing industry expected to reach $220 billion in revenue by 2025, especially driven by increased demand for healthy snacks. The variation in natural ingredients used for snack food manufacturing presents challenges for quality control, often resulting in undesirable or discarded products and revenue loss. Traditional methods for monitoring parameters of interest include HPLC, ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
FT-NIR analaysis for chocolate & cocoa sector
The cocoa bean is the seed of the tropical cacao tree and is used to make cocoa powder, chocolate from cocoa liquor, and cocoa butter. Worldwide production has grown by nearly 200% in the last forty years. Bean pods are harvested, laid out to ferment, dried, and shipped to a manufacturing plant. Manufacturing steps include cleaning, alkalization (Dutching), milling, mixing, conching, and tempering. Both the raw materials and manufacturing steps are monitored for quality control. Traditional methods such as HPLC, ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Gas analyzers and monitoring systems for Compliance measurements
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas Analyzers for Power Plant Application
As the world pushes for an increased focus on clean energy and sourcing, power plants need to consider every aspect of their operation that impacts ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
SF6 Leak Detection
Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Measurements Solutions for Transmitted Wavefront
Transmitted wavefront error (TWE) is used to qualify the performance of optical elements as light passes ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Chromatography laboratory instrumentation for chemical industry
Effective, safe and sustainable processes play a key role in the chemical industry. To meet these needs, BUCHI offers a variety of reliable and modern solutions for R&D, scale-up, production and quality ...
By BUCHI based in Flawil, SWITZERLAND.
-
Premium
Measurements Solutions for Form & Flatness
Manufactured surfaces can take on many shapes and sizes. For surfaces where the characterization of shape is function critical, ZYGO laser interferometers and 3D optical profilers stand out with sub-nanometer repeatability of non-contact surface data. Incorporating industry standards for form and flatness into Mx™ analysis software creates a single stop measurement tool for surface inspection. Explore the solutions for your application in surface form and flatness metrology ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Identification of rubber
INTRODUCTION Rubber is a material that is widely used in all kinds of human activity. Rubber properties are modified by addition of chemical substances and ingredients causing physical and chemical modifications. The ingredients modify rubber hardness, durability and impact st rength; increase its resistance to wearing, oils, oxygen, solvents, heat, and cracking, which makes rubber more suitable for the use in various application ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Measurements Solutions for Optical Measurement of Films & Coatings
Precise characterization of thick and thin film topography and thickness, and substrate topography. There are many applications in which the deposition and control of films and coatings is critical to enabling functionality or efficiency of devices, including consumer electronics, semiconductors, optics and many more. Such advanced devices often demand accurate characterization of film topography and layer thicknesses to ensure high quality and ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Continuous emissions monitoring solutions for steel plants
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Direct mercury determination in foodstuff and mixed feed
Introduction: Direct (without any pre-treatment) atomic absorption or atomic fluorescence mercury determination in food and feed is difficult due to complex organic matrix. That is the reason why conventional AFS and AAS methods include sample digestion by acids and require compressed gases such as argon or oxygen. This makes analysis more complicated and costly and extends analysis time. Sample pre-treatment can also increase measurement errors. The use of a RA-915M/RA-915M+ mercury analyzer with a PYRO-915+ ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Machine condition monitoring for metals processing
Metals processing industries employ large, critical assets, the reliability of which is absolutely essential to their business model. An undetected failure of a piece of processing equipment such as a rolling mill gearbox, or a 1000 ton extruder press not only involves the cost of equipment repair and line downtime, but the product quality may be severely impacted. Today more than ever, there is also less redundancy. Oil analysis is a critical aspect of a reliability based maintenance program, and for many large ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
XRF Spectrometers solutions for cement analysis industry
The chemical composition of cement plays a crucial role in the determination of its properties as a binder substance. The chemical analysis of cement components is widely used in the cement industry for production optimization and stable high-quality assurance of the final product. High requirements for cement quality are formed by its usage in the fabrication of concrete – the most consumed material in the building ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
FT-NIR spectroscopy in sugarcane liquor industry
Sugarcane was discovered in India between the 6th and 4th centuries BC by Persians. Today, sugarcane is the world's largest crop by production quantity. It is cultivated in more than 90 countries with Brazil, India and China as the top three producers. For centuries, sugarcane has been cultivated to produce sugar. Then its cultivation was expanded to produce liquors, and with today's technology, use of sugarcane is expanding into an extraordinarily diverse range of value-added products such as ethanol, ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Advanced FT-NIR Solutions for Tobacco Processors and Manufacturers Sector
Tobacco is one of the most widely used addictive substances in the world making it one of the largest industries across the globe. Tobacco can grow in any warm and moist environment which means it is farmed on all continents except Antarctica. The tobacco industry includes tobacco producers and farmers, tobacco manufacturers, wholesale distributors, and importers of tobacco ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Measurements Solutions for Machined Surfaces
ZYGO 3D optical profiler products utilize non-contact coherence scanning interferometry (CSI) technology to offer precise, rapid and quantitative surface metrology of form and roughness for improved part quality and manufacturing yields. Our field-proven and innovative solutions enable our customers to control their current machining processes, while providing the insight to analyze and solve manufacturing challenges as they ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Wedge & Prism Angle
The performance of optical systems such as telescopes, camera lenses, and laser systems rely on the quality of the optical components within the systems. Many plano optical components appear completely parallel from a side view, however there is typically some wedge between the sides. In extremely precise systems, knowing the degree of a window’s wedge is ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you