Stack Sampling Equipment For Monitoring And Testing Near Maldives
-
Manufactured by Soniya Scientific Equipment Solutions Pvt. Ltd.based in INDIA
Soniya Scientific Stack Sampler SSES-SEM-001 has been developed to fulfill these requirements where user ease and emission monitoring regulations requirement have been given due consideration for reliable data ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
-
PremiumManufactured by ENVEAbased in FRANCE
MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy ...
-
based in USA
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
-
based in USA
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
-
based in USA
The SmartCEMS Portable Gas Analyzer System is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Portable Gas Analyzer System can test up to 6 gases simultaneously, or swap sensors out for additional parameters. It has an innovative ...
-
based in USA
The SmartCEMS® Shelter CEMS is a complete continuous emission monitoring system (CEMS) contained in a fixed shelter. The Shelter CEMS is without a zone rating such as ATEX II. The Shelter CEMS can be equipped to provide continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Shelter CEMS is equipped with analyzers ...
-
based in USA
The SmartCEMS Remote Automated Sample and Calibration, or RASCAL, interfaces with the PEMS or DAHS and performs automatic audits and report generation for PS-16 compliant RAAs. The remote calibrator is used with a portable analyzer to provide a complete automated compliance package minimizing maintenance staff and costs for PEMS QA onsite. ...
-
based in USA
The SmartCEMS® Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model development and PEMS QA activity. The Sample Line is required to connect the Probe ...
-
based in USA
The SmartCEMS Shelter CEMS is a complete continuous emission monitoring system (CEMS) contained in a fixed shelter. The Shelter CEMS is typically supplied either with or without a zone rating such as ATEX II. The Shelter CEMS can be equipped to provide continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Shelter ...
-
based in USA
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for use in reference method testing both for model ...
-
Manufactured by Munro Instruments Ltdbased in UNITED KINGDOM
The L60iF is a Large Volume Air Sampler with an integrated flow monitoring system. Developed from the basic L60 Air Sampler, the L60iF incorporates microprocessor control and flow monitoring to provide additional ...
-
Manufactured by Polltech Instruments Pvt. Ltd.based in INDIA
PEM-MES 1-X consists of a set of glass nozzles, a heated glass lined probe ( model PEM-HGLP 3 ), a heated filter box (model PEM-HFB2), an insulated PTFE sample transport tube and a sample collection equipment consisting of 6 or 7 glass impingers in an impinger box. The metering system for iso-kinetic sampling can be either be a manual kit ( PEM-SMK 10) or automatic kit (PEM SMS-4). The sample ...
-
Manufactured by Polltech Instruments Pvt. Ltd.based in INDIA
The Manual Stack Monitoring Kit is used to take accurate representative samples of particulate matter and various gaseous pollutants such as SO2, NOX etc. emitted from industrial stacks. It facilitates sampling of the stack emissions in accordance with the methodologies developed by US EPA and as specified by CPCB. Classical stack monitoring kit with advanced digital features. Based on US EPA ...
-
Manufactured by MM Automationbased in INDIA
Portable Stack Gas Analyzer for Combustion efficiency with O2 /CO /CO2 /SO2 /NO2….. A compact rugged unit to measure Fuel Efficiency, Excess Air, Oxygen etc. in Stack / Duct for Exhaust Gas of Furnace & ...
-
Manufactured by Drop Enviro Engineers & Servicesbased in INDIA
Stack Sampler is a basic instrument used for Particulate matters (PM) under Isokinetic conditions and gaseous pollutants in flue gas emitted from the stack/chimney. Offered range is designed and manufactured as per the set industry norms using quality approved components with the help of advanced ...
-
Manufactured by DOD Technologies Incbased in USA
Tiger is the most advanced hand held VOC detector on the market with the widest measurement range, accurately detecting gases down to the ultra low ppb levels up to 20,000 ppm. The internal gas table detects over 480 VOCs and toxic compounds. Its patented Fence Electrode Technology with three electrode format and Anti-contamination design ensures optimal performance within humid and difficult ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you