Stack Sampling Equipment For Monitoring And Testing Near Marshall Islands
-
based in UNITED KINGDOM
UNITY–ULTRA-xr Pro™ is our highest capacity, automated thermal desorption system for the unattended sampling of up to 199 sample tubes in a single sequence. Its automated re-collection of tube and trap desorption split flows is unique to Markes and provides the most comprehensive re-collection options and enhanced sample security. It is ideal for laboratories needing to rapidly ...
-
based in UNITED KINGDOM
TD100-xr™ is an automated thermal desorption system for the rapid and unattended processing of up to 100 × 3½-inch sorbent tubes in a single sequence. It’s the perfect thermal desorption unit for high-throughput analytical laboratories needing to process large numbers of tube-based samples ...
-
based in UNITED KINGDOM
UNITY–ULTRA-xr™ is an automated thermal desorption system for the rapid and unattended sampling of up to 100 sorbent tubes in a single sequence. Additional options include autosamplers for canister, bag or on-line analysis. The UNITY–ULTRA-xr is the ideal platform for labs requiring the flexibility to expand their capabilities to extended analyte ranges and varied sample types ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
-
PremiumManufactured by ENVEAbased in FRANCE
MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
Distributed by a1-cbissbased in UNITED KINGDOM
Based on the MIR-9000, this in-situ multi-gas CEM system is a compact extractive monitoring system, providing fast response, close coupled measurements. CEM Systems are required to satisfy environmental led legislation within industrial ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
TheCWFrange of general purpose laboratory chamber furnaces is bench mounted. Models are available in five sizes with a maximum operating temperature up to 1300 °C. The airflow in theCWF-Bfurnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
-
Manufactured by California Analytical Instruments, Inc. (CAI)based in USA
The California Analytical Instruments Model 600 FID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement ...
-
PremiumManufactured by Environics, Inc.based in USA
Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, coating the gas path also improved efficiency, reduces moisture contamination and prolongs unit life. A coating is often used in combination with a heated flow path ...
-
Manufactured by Munro Instruments Ltdbased in UNITED KINGDOM
The L60iF is a Large Volume Air Sampler with an integrated flow monitoring system. Developed from the basic L60 Air Sampler, the L60iF incorporates microprocessor control and flow monitoring to provide additional ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments has a large selection of button-hook nozzles in multiple materials. Determining the size needed for isokinetic sampling depends on the stack gas velocity. Determining the material depends on the stack temperature and the sampling method. We provide technical support and can help with configuration. ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
This out of stack sampler provides reliable sample stability and reduces moisture in the sample. Well suited for high particulate and wet samples, promotes long filter life and can withstand contant exposure in the harshest stack environments, Usable with a wide range of ambient air analyzers, this sampler provides a strong single mounting point adaptable to a variety of port ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Model XC-523 is a full-feature manual meter console. Designed with a convenient display layout for manual data recording, this Isokinetic XC-523 Source Sampling Console allows the operator to monitor gas velocities, temperatures, and pressures and adjust sample flow rates to maintain isokinetic sampling conditions. The lightweight X-case and compact design allows for easy ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments PFAS Sampling System is based on the EPA Other Test Method 45 (OTM-45) and Other Test Method 50 (OTM-50) for the isokinetic collection of PFAS from stationary sources. PFAS stands for per- and polyfluoroalkyl chemicals, which are found in a wide range of consumer products and facilities. PFAS can accumulate in the body and may lead to adverse health effects. Gaseous and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you