Stack Testing Applications available in Equatorial Guinea
-
Premium
Direct mercury determination in coal
Introduction Mercury is one of the most toxic trace contaminant naturally occurring in the coals. During the coal combustion process at the coal-fired power plants mercury is released into the environment. To manage effectively the stack gas cleaning process, it is necessary to know the mercury content in the coal, and also in stack gas, liquid and solid ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air pollution, emission and process monitoring systems for chemicals
ENVEA’s long standing involvement with manufactures of powdered chemicals such as TiO2 and carbon black has led to the development of a wide range of ambient, emission and process monitoring systems designed to overcome often challenging monitoring conditions including acidic condensation and potential contamination. Approved measurement and monitoring systems not only protect our environment by meeting and exceeding regulatory requirements but also provide valuable feedback on process performance providing ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Raw-gas monitoring for scrubber optimizing
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
FlareSpection
Infrared Camera System for Continuous Pilot Flame and Flare Stack Monitoring The FlareSpection™ system provides extremely clear and reliable flare image and pilot flame monitoring of multiple flare tips. FlareSpection optimizes plant operations, ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Ultrasonic sensors for distance ranging applications
Distance measuring applications are numerous and ideally suited to the flexibility and high performance of our ToughSonic sensors. Used both indoors and outside, these applications include everything from measuring roll diameters and controlling web loops in converting machinery, to scanning plant heights for phenotyping, to measuring the flying height of America’s Cup boats. Our General Purpose ultrasonic sensors are fully user-configurable and connect with all types of industrial equipment. ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Marine monitoring solutions for the SO2/CO2/NOx monitoring
Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring instruments and systems for stack testing according to EPA test method 320
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Fully-automated gas chromatographs solutions for oil & gas industry
For the international oil and gas industry Synspec instruments are used for process, fence line and stack emissions monitoring. Whether it is about aromatics, mercaptans or olefines the industrial end-users retrieve data of concentrations of chemical compounds for optimisation of their process ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Process instrumentation and analytics solutions for environmental monitoring industry
From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these ...
By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Process Flue Gas Monitoring for Combustion Optimization Application
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Monitoring solutions for the continuous emissions monitoring
Multi-gas Stack Analyzers for Continuous Emissions Monitoring. FTIR and UVDOAS Analyzer Models available for Insitu Probe, Internal or External Cells, or Cross Stack Sample ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Emissions Monitoring for Power Plants
Opsis offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been approved by the German TÜV and the U.S. EPA among ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring
The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Visual inspection solutions for the chimney inspection video cameras
Welcome to our Chimney Inspection Cameras section. Chimney Inspection Cameras are becoming increasingly popular, especially when physical inspection of chimney surfaces is not feasible. This is particularly necessary for small diameter chimney liners, old stone flues in unknown condition, in order to get safety certificates, ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Fully-automated gas chromatographs solutions for stack emissions monitoring sector
Synspec GCs can also be used as continuous emission monitoring systems (CEMS). In general, emissions from stacks are in the higher ranges of concentrations to be measured. Synspec equipment, which is usually geared towards very low detection levels, can be tuned to the concentration ranges that are emitted at your production plant. Depending on the composition of the emissions a sample treatment might be ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Air pollution, emission and process monitoring systems for incineration
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Stack gas emission monitoring for the energy industry
By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you