Stack Testing Equipment For Monitoring And Testing Available In Togo
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
ShowcaseManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 82 S is the next generation in measuring NOx. Unique in speed and precision, the nCLD 82 S is modular designed and expandable to additional nitrogen based parameters. Its new and intuitive user interface “GUI“ also individually displays and connects to other instruments’ ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The TwinEye inspection camera is a professional device designed specifically for chimney and flue inspections, and can be either pushed up the channel, or turned around to provide a downwards view in cases with extreme soot and other debris. The camera features twin CCTV camera sensors, one with a forward (straight down) view, and the other with a sideways (perpendicular) view. The live image ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The Gecko 4510-ST Chimney Camera is a premium, high end color inspection camera designed specifically for chimney, duct and flue inspections. It can be either lowered down from the top, or runt up from the bottom using a fibreglass rod. This is great for inspections in extreme soot and other debris. The Gecko Chimney is manufactured in Germany, and it is a complete set which includes a flexible ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's FlareSpection system provides pilot flame monitoring for applications with multiple flare tips. You can confirm flare operation remotely and detect differences in flare stack heat signatures. Continuous, remote, and automatic monitoring of pilot flames and flared gases. High resolution 640 x 480 pixel thermal imager, providing unmatched spatial resolution. Superior image ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Nitrous oxide (N2O) is a man-made green house and ozone depletion gas. Emissions from agriculture are the main source, followed by industry and energy plants. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are seasonal differences. Therefore, highly sensitive and stable instrumentation is needed to monitor N2O ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 M is modular designed and capable of simultaneously measuring NO, NO2 and NOX. The analyzer’s expandable capabilities allow assessment of hot and humid gas sources without additional cooler. The new and intuitive graphical user interface ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 62 MOx is the next generation in measuring NO/NOX , O2 and CO2. Unique in speed and precision, the nCLD 62 MOx is modular designed and allows the continuous measurement of concentrations in the range of parts per million. The measuring principles comply with international emissions monitoring regulations and its new and intuitive user interface individually displays and connects to other ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 M is modular designed and capable of simultaneously measuring NO, NOx and NO2. The analyzers expandable capabilities allow assessment of hot and humid gas sources without additional cooler. It features a dual inlet option for evaluation of two ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-300 I dust monitor is a self-developed extraction dust monitor, based on years of technology research and development for dust monitoring. It uses laser forward scattering prnciple to monitor the dust concentration. It owns features of low detection limit(as low as 0.05mg/m3), no interference by moisture with full process high temperature heat tracing for measurment. It can be widely applied ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The ColorEye chimney inspection camera is a professional device designed specifically for chimney and flue inspections, which can be either pushed up the chimney, or lowered down to provide a better view. The ColorEye camera features a bright, crisp color camera with built in super bright LED’s. The camera is protected by a custom built stainless steel housing, and there are “O” ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-350 laser moisture analyzer is a high precise analyzer for gas measurement, developed based on tunable diode laser absorption spectroscopy. One-side mounting installation is much easier than cross-stack. By using a tunable semiconductor laser, LGT series laser gas analyzer scans the specific absorption lines of the measured gas(no background gas) to get the second harmonic of the gas. Through ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IM 1120 Flue Gas Analyser with its new, innovative HMI concept is controlled via the IM-Smart app and ensures simple operation, handling and evaluation for the user. Free IM-Smart app for remote operation of the IM 1120 with a tablet or smartphone. Various measurement modes with report generating function are available: Flue gas analysis - Differential Temperature - Oxygen Gap - CO Ambient - ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The Gecko 9020 pan-and-tilt pipe camera is a premium device designed and manufactured in Germany to be extremely durable and great for plumbers, piping/duct work, sewage tanks, manufacturing, weld inspections, and chimney cleaning. They feature a flexible push cable which will not break easily, a solid waterproof camera head, and manual/automatic pan and tilt functions. These units are offered in ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments has a large selection of button-hook nozzles in multiple materials. Determining the size needed for isokinetic sampling depends on the stack gas velocity. Determining the material depends on the stack temperature and the sampling method. We provide technical support and can help with configuration. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you