Stack Testing Equipment For Monitoring And Testing Available In California
-
ShowcaseManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 82 S is the next generation in measuring NOx. Unique in speed and precision, the nCLD 82 S is modular designed and expandable to additional nitrogen based parameters. Its new and intuitive user interface “GUI“ also individually displays and connects to other instruments’ ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's FlareSpection system provides pilot flame monitoring for applications with multiple flare tips. You can confirm flare operation remotely and detect differences in flare stack heat signatures. Continuous, remote, and automatic monitoring of pilot flames and flared gases. High resolution 640 x 480 pixel thermal imager, providing unmatched spatial resolution. Superior image ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Medium porosity, 34 x 100 mm, round bottom, fits SFA-300, use additional O-ring (O-123V) Ceramic thimbles do not meet the EPA regulatory standard of 99.95 retention for Methods 5 and ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The Gecko 3110 self leveling drain camera is a premium device designed for plumbers, piping/duct work, sewage tanks, manufacturing, weld inspections, and chimney cleaning. These units are manufactured in Germany, and they feature an extremely flexible and durable push cable that will not easily snap, a durable waterproof camera head that is self leveling, so the image on the monitor is always ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 Mh analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mh is modular designed and capable of simultaneously measuring NO, NOx and NO2 from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two different sources at once. The new and intuitive graphical ...
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
-
PremiumManufactured by Mobile Power Equipment, LLC (MPE)based in USA
Rugged and simple, this is how a sewer camera should be. The V-SNAKE has a built-in sonde and SD recorder. The stainless steel high quality camera head has extremely rounded corners for easier pushing and the LED lights are protected by the sapphire lens. The Layflat reel design allows for simplified operation yet still allows the unit to be transported in the upright position. Operates on a ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
UV 3000 Series: UV 3000, UV 3000P, UV3000C-RM. UV-DOAS based Continuous Emissions Monitoring. Cross stack, In-Situ probe and Parallel cell models available. Combustion gases, BTEX, SVOC’s, chlorine, ammonia, and more. Application specific ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS Controller, which provides a large graphical user interface ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low vibration, silent and long lasting ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 is available with or without an Operator Interface (control unit), so for the most cost effective monitoring solution the CEL-022 can operate as a ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments has a large selection of button-hook nozzles in multiple materials. Determining the size needed for isokinetic sampling depends on the stack gas velocity. Determining the material depends on the stack temperature and the sampling method. We provide technical support and can help with configuration. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you