Stationary Gas Monitoring Equipment For Monitoring And Testing Available In Belarus
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments SB-47 is a heated filter oven that uses a 47 mm glass fiber filter and is specifically designed for isokinetic sampling of low particulate matter (PM) concentrations from stationary sources, such as gas turbines. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the flue-gas conditioning process is filtering the gas sample. The filtered flue-gas enters the IMR 400 ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
Monitoring the environment for explosive gases most of the time you would be looking for hydrocarbons. It is a characteristic of hydrocarbons that they have a number of C – H bonds. These bonds absorb infrared light at a wavelength of 3,4 mm ( unsaturated hydrocarbons absorb at 3,3 mm ). This effect can be used to reliably detect these substances. The most important advantage is that ...
-
Manufactured by Landa Kärcher Groupbased in USA
The NG transforms your cold water machine into a powerful hot water pressure washer. Stationary and natural gas heated, the NG simply attaches to your cold water pressure ...
-
Manufactured by Consilium Safety Groupbased in SWEDEN
The ST480xi is a stationary gas detector which is developed to detect a numerous of toxic gasses, Oxygen and Hydrogen with a high reliability. This all-round gas detector can be applied at virtually every type of industrial application. Functionality and maintenance of this new generation of gas detector meets today’s essential demands for reliability, accuracy and cost ...
-
Manufactured by Watts Regulator Companybased in USA
This durable, corrosion-resistant stainless steel gas connector is configured with pipe threaded fittings for installation. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas logs and space ...
-
Manufactured by Regis Technologies Inc.based in USA
Reflect™ coated amylose chiral columns are high performance polysaccharide chiral phases suitable for a wide range of chiral compounds in normal phase HPLC and SFC modes. Unique, proprietary, phase coverage provides excellent peak shape and improved resolution versus leading chiral phases. This high resolution greatly improves preparative loading, leading to greater productivity and higher ...
-
Manufactured by Waters Corporationbased in USA
Waters offers three unique brands for SFC chromatography. Our newest addition includes Torus Columns in preparative formats due its excellent performance for a wide range of compounds and matrices. Our Torus and Viridis lines for achiral SFC applications are available in analytical and preparative particle sizes ranging from 1.7 µm to 5 µm. The preparative format utilizes our ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
The Statox 502 Control Module has been replaced by the even better Control Module Statox ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
PIDs (Photo – Ionisation – Detectors) detect VOCs (Volatile Organic Compounds) in the ppm range, which other sensor types are unable to monitor, like solvents and fuels. A PID sensor uses high energy ultra violet light radiation to break gas molecules into radicals, which are discharged while passing a condenser. The discharge current increases proportional to the number of molecules, ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard. Intelligent Gas Sensors for AsH3, Cl2, ClO2, CO, COCl2, H2, H2S, HCl, HCN, HF, N2H4, NH3, NO2, O2, O3, PH3 and SO2. The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features everything that a new gas detection instrument of the latest generation needs: State of the ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
Monitoring of Critical Infrastructures. Detector for hazardous gases and chemical agents. The GDA-S is a continuously operating chemical agent detection system. It is used to monitor sensitive public structures, buildings and workplace ...
-
Manufactured by ECHO d.o.o.based in SLOVENIA
Stationary gas analysers and gas analysis systems for laboratory and industry. Infrared, paramagnetic and electrochemical gas sensors. Standard or high precision sensors. 1 to 8 sensors in 19” enclosure. configuration on demand. Touch screen interface. Autocalibration ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JXCTbased in CHINA
Electrochemical O3 gas sensor is a gas detection instrument that uses electrochemical gas detection technology to detect ozone gas concentration in the air. Electrochemical O3 gas sensor has good selectivity, stability built-in temperature sensor, can be temperature compensation; With digital output, easy to use. The ozone sensor is a universal gas module designed and manufactured by combining ...
-
Manufactured by Regis Technologies Inc.based in USA
The WHELK-O 1 Chiral Stationary Phase is based on 1-(3,5-Dinitrobenzamido)- 1,2,3,4,-tetrahydrophenanthrene. This phase allows separation of racemates from a number of families including amides, epoxides, esters, ureas, carbamates, ethers, aziridines, phosphonates, aldehydes, ketones, carboxylic acids, and ...
-
Manufactured by Daicel Corporation.based in JAPAN
These columns contain a chiral crown ether as a chiral selector which is a coated onto a 5μm silica support. Acidic mobile phases such as Perchloric acid pH 1 to 2, are used to operate these columns under standard conditions. Note that to shorten the retention time of hydrophobic samples, the addition of Methanol ( 15% maximum v/v) has been shown to be effective. These columns are the ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
No new units sold anymore. Compur Monitors does support all existing systems with spare parts, consumables and service now and in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you