stationary sampling Articles

  • Small Diameter Piston Sampling with Cone Penetrometer Equipment

    A small diameter piston sampler that can be operated by a cone penetrometer rig has been developed specifically for recovery of sand and clay samples under conditions where sample recovery using ordinary means is difficult. The 22-mm-diameter sample that is recovered in a polythene sheath is valuable for visual examination of the soil rather than for most laboratory testing purposes. Provided the ...


    By ASTM International

  • Fast Analysis of Environmental Samples, Using Solid-Phase Microextraction (SPME)

    Solid Phase MicroExtraction (SPME) is an alternative to conventional sample extraction techniques. In SPME, analytes establish an equilibrium between the sample matrix and a stationary phase coated on a fused silica fiber (Figure A). The fiber is thermally desorbed in the injection port of the GC, which transfers the analytes into the capillary column. Because no solvent is injected, and the ...


    By MilliporeSigma

  • Stationary Spiraling Eddies and Self-Cleaning Processes in the White Sea in Presence of Climate Change and Their Relationship with Ecology of the Greenland Seal: Results of Airborne-Satellite-In Situ Study

    Pollution of the marginal Arctic seas and rising of toxic contaminants are extremely dangerous for marine and coastal ecosystems and for marine mammals as representatives of a high level of fodder chains in the ocean. Ecology of ice-associated forms of marine mammals, population health and animal welfare are strongly depended from the different environmental processes and phenomena. Operational ...


    By Springer

  • Evaluations of Polar and Highly Polar Ionic Liquid Capillary GC Columns with Environmental Samples

    Ionic liquids are a class of non-molecular ionic solvents with low melting points.  These liquids are unique combinations of cations and anions and can provide a variety of different selectivities when used as stationary phases in capillary gas chromatography.  A number of ionic liquid phases have been evaluated and characterized for selectivity and determined to be polar or highly ...


    By MilliporeSigma

  • Detection of chlorpyrifos in air using low volume polyurethane foam (PUF) sampling with immunoassay

    MATRIX: Air samples ANALYTE: Chlorpyrifos RANGE OF DETECTION: 0.088 to 1.200 mg/m3 MATERIALS: Chlorpyrifos RaPID AssayÒ Kit and Sample Diluent. Reagents: methanol (pesticide grade). Equipment: 40 mL glass vials with Teflon lined caps, 13 x 100 mm glass test tubes, 5 mL and 20 mL serological pipets, micropipet ...


  • Fast Screening for Chlorinated Pesticides, Using Solid Phase Microextraction (SPME) and Capillary GC

    Fast analysis of environmental samples increases throughput in the lab and is highly desirable for quick turnaround screening methods used in the field or prior to GC/MS analysis. Solid phase microextraction is a fast, solventless alternative to conventional sample extraction techniques. In SPME, analytes establish an equilibrium between the sample matrix and a stationary phase coated on a fused ...


    By MilliporeSigma

  • ALKION column and eluant system

    Introduction: The stationary phase in the ALKION column is a rigid, non-porous polymeric phase that is surface sulfonated. The two modes of separation are ion-exchange and moderate partitioning. The low capacity of the ion-exchange resin makes it an ideal phase for the separation of strongly basic and positively charged compounds. The reversed-phase character allows for ...


    By Pickering Laboratories, Inc.

  • Measuring SO2 ship emissions with an ultraviolet imaging camera

    Over the last few years fast-sampling ultraviolet (UV) imaging cameras have been developed for use in measuring SO2 emissions from industrial sources (e.g. power plants; typical emission rates ~ 1–10 kg s−1) and natural sources (e.g. volcanoes; typical emission rates ~ 10–100 kg s−1). Generally, measurements have been made from sources rich in SO2 with high concentrations ...

  • Hydrogen-cooled electric generators case study

    Application Moisture contamination is measured in the hydrogen gas used to cool large stationary electric generators. Problem Hydrogen is used to cool the bearings and other rotating parts of large stationary electric generators. Hydrogen is the best choice for a cooling gas because of its unique combination of high thermal conductivity and low viscosity. In ...

  • Monitoring Oil in Cooling Water - Case Study

    The Situation A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Amthor International Tanker Truck

    If you need a tanker truck, then you’ll have a large selection of different types of tanker trucks to choose here at Amthor International. We are a fourth generation company that can meet your tanker truck needs no matter what they are. Not only do we have floor models of our many different tank trucks available, we also offer pre-owned units and can customize tanker trucks to your unique ...


    By Amthor International

  • So Your Greenhouse Gas (GHG) Monitoring Plan is Complete... Now What?!?

    U.S. EPA's Greenhouse Gas Mandatory Reporting Rule (GHG MRR) codified at 40 CFR Part 98 required that facilities subject to the rule have a complete written GHG Monitoring Plan by April 1, 2010. At a minimum, the GHG Monitoring Plan must identify (1) methods used to collect GHG emissions information and supporting data, (2) personnel responsible for collecting the data, and (3) quality assurance, ...


    By All4 Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you