Steam Flow Monitoring Equipment For Monitoring And Testing Available In Oman
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With metallic measuring diaphragm. Application area: For applications with liquids in small containers under simple process conditions. Possible applications can be found in almost all industrial sectors. The VEGADIF 85 is a universal differential pressure transmitter for measurement of liquids, gases and vapours. Typical application areas are level measurement in pressurized vessels as well as ...
-
Manufactured by RCM Industries, Inc.based in USA
Saturated steam all metal flow meters are used in the power generation industry. The flow meters are inverted in the piping system to protect the indicator from excessive heat and condensation that can form on the ...
-
Manufactured by Comate Intelligent Sensor Co., Ltdbased in CHINA
The product uses the VFM45 transmitter technology, which provides with the excellent signal processing capability and enhance the vortex metering technology to a new level, which means it has lower measuring limit, better stability and accuracy. The special signal processing method has also ensured a better anti-vibration by eliminating the vibration ...
-
Manufactured by General Instruments Consortiumbased in INDIA
General Flow Nozzle is used in typically high-velocity,non-viscous,erosive flow.They are suitable for determining the flow rates of fluids at high temperature and high pressure.General Flow Nozzles are erosion-resistant,consisently accurate and virtually maintenance-free.They Perform a wide variety of applications that include air ,water,steam,gas,chemical substances and high temperature ...
-
Manufactured by Spirax Sarco Inc.based in USA
Spirax Sarco Vortex meters have no moving parts, rugged construction, and microprocessor-based electronics for high accuracy in many flow metering applications including liquids, gas and steam. Vortex flow meters provide accurate measurement with lower maintenance, and lower total cost of ownership than other flow meter technologies in line sizes 1' to ...
-
Manufactured by Intra-Automation GmbHbased in GERMANY
Itabar Steam Flow Sensors are designed to operate in environments with temperatures up to 650°C and 400 bar pressure. Various designs and materials can be selected to adapt customers ...
-
Manufactured by Western States Machine Companybased in USA
The ROBERTS I-SERIES Continuous Centrifugal is the most productive continuous centrifugal available. Two innovative Western States’ designs combine to provide maximum throughput with very low final molasses purity; to create the cast stainless steel basket with machined annular grooves for large drainage area, and to innovate the side feed system with complete massecuite ...
-
Manufactured by ProSonix LLCbased in USA
Jet Cooker for corn wet milling, fructose production, ethanol production, wet end starch ...
-
Manufactured by Hydro-Thermal Corporationbased in USA
The EZ Heater is the industry leader in all hot water applications with its unique internal modulation, and self-cleaning ability. With instantaneous hot water where you need it, the EZ Heater is ideal for washing stations where maintaining a minimum temperature is critical, CIP (Clean in Place) systems, and anywhere that you need reliable hot water now. High velocity steam eliminates scale build ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
Measure More Steam, Reduce Energy Costs with the ExactSteam V-Cone. McCrometer’s ExactSteam V-Cone System is a complete flowmeter for steam metering, factory configured for energy metering or mass flow. The meter accurately measures steam across the entire range with technology-leading low flow cut off. In addition, V-Cone technology enables the lowest permanent pressure loss to maximize ...
-
Manufactured by Tecfluid S.Abased in SPAIN
Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction. Indication by means of magnetic coupling. Scales calibrated in l/h, m3 /h, kg/h, t/h, %, etc. High performance measurement in extreme working conditions and high resistance to corrosion. Low pressure drop. Fully hygienic design available. Damping mechanism to avoid float bounces in gas and ...
-
Manufactured by ProSonix LLCbased in USA
Tank sparging & industrial water tank sparging is a very common heating application for many companies. Industrial water heating is critical to many process’. ProSonix steam injection heaters are designed to improve performance over traditional heat exchangers, steam spargers, and steam eductors. Steam mixing valves and steam sparging when done incorrectly can lead to steam hammer and ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Meter runs combine a flow element with inlet and outlet piping and thus help in reducing disturbances in the flow measurement of aggressive and non-aggressive gases, steam and liquids. They are mostly used in small pipelines because the influence of disturbances on the measurement is significant with smaller ...
-
Manufactured by Autoflame Engineering Ltd.based in UNITED KINGDOM
The Mk8 MM Controller is a Micro-Modulating system that offers comprehensive control over industrial and commercial boiler/burners. Manage virtually all boiler processes from a single 12.1” multi-touch screen interface without any added modules. Ideal for steam and water boilers (watertube or firetube), kilns and steam generators. Designed for oil, natural gas or both fuels. Linkageless ...
-
Manufactured by ProSonix LLCbased in USA
PSX I-Series Inline Heater with PSX Jet Diffuser. Applications: Water heating, slurry heating, hi-viscosity & hi-solids fluids & ...
-
Manufactured by Bell Flow Systems Ltd.based in UNITED KINGDOM
BFVM series Vortex flow meters are designed for measuring the volume/mass flow of liquids, gases and steam based on the Karman vortex principle. Using an advanced differential algorithm along with signal isolation, buffered shielding and wave form filtering, BFVM series vortex flow meters offer guaranteed accuracy and have the advantages of immunity to vibration and application derived ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Orifice plates with taps are flow elements used for flow measurement of aggressive and non-aggressive gases, steam and liquids. In contrary to the normal orifice plates, they include a carrier ring where the pressure taps are located. This integral design allows these orifice plates to be mounted between standard pipe ...
-
Manufactured by Manas Microsystem Pvt. Ltdbased in INDIA
Manas, a premier steam flow meter manufacturer, offers Model SFMc-150, which is applicable for measuring flow rates of saturated and superheated steam, mass flow rates of Boiler feed Water in closed conduits. It is based on one of the time-tested principles of flow measurement, the differential pressure measurement across the ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Nozzles are used as DP flow elements for flow measurement of aggressive and non-aggressive gases, steam and liquids. The permanent pressure loss is lower in comparison to orifice plates. In contrast, the measuring uncertainty may be higher. Regarding these parameters, nozzles may be defined as an intermediate solution between orifice plates and venturi ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you