Strain Monitoring Equipment For Monitoring And Testing In Latin America
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Continuous, automatic recording of precipitation amount. For recording any kind of precipitation (rain) with its intensity in the nature usually tipping bucket precipitation gauges and samplers are used. If precipitation has to be measured also in winter with temperatures below the freezing point, the measuring instrument has to be equipped with a heating. ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The GP1 Data Logger is a complete logging solution housed in a waterproof IP67 enclosure with battery power. The internal memory can hold >600,000 readings - more than enough for one year's operation ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The Falmouth Scientific, Inc. Tide Monitoring System is a complete tide monitoring system for moorings and other long-duration fixed-site deployments. The pressure module is a precision strain-gauge pressure sensor for measuring water level; barometric pressure compensation is provided by a sensor mounted in the system's surface enclosure, which also incorporates rechargeable battery and system ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Depth is distance below the water surface. Stage is the same thing, except that stage sensors are more accurate over a smaller range (usually a maximum of 10 meters) than depth sensors and are vented to the atmosphere at the surface. The term “level” is often used interchangeably with stage. ...
-
Manufactured by DEWESoftbased in SLOVENIA
Rugged and distributed data acquisition modules with EtherCAT interface for analog and digital I/O and IP67 degree of protection. ...
-
Manufactured by Geokon Incbased in USA
The Model 4000 Strain Gage is designed primarily for arc welding to steel structures such as tunnel linings, excavation bracing, piles and bridges. The gage has a 150 mm gage length (longer or shorter versions are also available), a 3000 µε range and a 1 µε sensitivity. The gage can be adapted for bonding to concrete or for bolting to steel surfaces by modification of ...
-
Manufactured by DEWESoftbased in SLOVENIA
TEDS equipped adapters that turn any of our DSUB9 universal analog input into direct IEPE, charge, thermocouple, shunt, voltage, LVDT or RTD ...
-
Manufactured by Sisgeo S.r.l.based in ITALY
Piezo-resistive piezometers, also called semiconductor piezometers or strain gauge piezometers, are very accurate pressure transducers suitable for high frequency readings and short term applications. Their robust 4-20mA output signals are easy to read and automate with OMNIAlog and suitable for long-distance transmissions. They can be connected to seismic dataloggers for monitoring rapid changes ...
-
Manufactured by Omnisens SAbased in SWITZERLAND
Power engineers are challenged to provide uninterrupted electricity supply at minimal financial and environmental cost, while fulfilling regulatory requirements, being Smart Grid compliant and cyber secure. How can Omnisens Cobra help in this challenge? Our complete technology solution is adapted to our client needs with the use of DTS (raman and brillouin), DSS or our latest DAS ...
-
Manufactured by Campbell Scientific, Inc.based in USA
With an AVW200 vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, hydrological, and geotechnical applications because of their stability, accuracy, and durability. The VSPECT technology is protected under U.S. Patent No. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW216 is a vibrating-wire analyzer module that includes an internal 2.4 GHz spread-spectrum radio for wireless communication in many countries worldwide. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, ...
-
Manufactured by Durham Geo Slope Indicator (DGSI) - part of Nova Metrix LLCbased in USA
The Rod Extensometer consists of anchors set at specified depths, rods inside protective tubing, and a reference head. Measurements are taken at the reference head by micrometer or by an electric sensor. Advantages: Can be automated, can be read remotely, works in any orientation, can measure multiple points. Limitations: Limited measurement range (50 to 100 ...
-
Manufactured by DEWESoftbased in SLOVENIA
The world's most versatile USB and EtherCAT data acquisition system. Any signal, any sensor, packed with cutting edge ...
-
Manufactured by Geokon Incbased in USA
The Model 3900 Embedment Strain Gage is designed for the measurement of dynamic strains in concrete structures, earth fills and soils. It comprises a full bridge strain gaged proving ring coupled, between two flanges, with a spring and shaft. When the flanges move relative to one another, the tension in the spring changes and hence the strain in the proving ring. A PVC tube serves as a protective ...
-
Manufactured by DEWESoftbased in SLOVENIA
Very robust DAQ systems with IP67 degree of protection, operating temperature between -40°C up to +85°C and high shock protection provide a very reliable solution for testing in the extremely harsh ...
-
Manufactured by DEWESoftbased in SLOVENIA
Complete IRIG-106 Chapter 10 acquisition and analysis solution for any kind of data source (PCM, Analog, Video, ARINC-429, MIL-STD-1553, Serial, Ethernet) in the ...
-
Manufactured by DEWESoftbased in SLOVENIA
Data acquisition and real-time control front-end system for industrial applications. All-in-one solution for real-time control and feedback monitoring. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW206 is a vibrating-wire analyzer module that includes an internal 910 to 918 MHz spread-spectrum radio for wireless communication, typically used in the U.S. and Canada. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW211 is a vibrating-wire analyzer module that includes an internal 920 to 928 MHz spread-spectrum radio for wireless communication, typically used in Australia and New Zealand. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety ...
-
Manufactured by Omnisens SAbased in SWITZERLAND
To provide quality control or help with the design and testing of fibers, Omnisens Vision offers fast, accurate strain and temperature measurements. Omnisens Vision is based on Brillouin scattering. In single mode fibers it produces precision readings with high spatial resolution over long distances and/or large loss test conditions. It is capable of high speed testing in dynamic situations ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you