Structural Monitoring Equipment For Monitoring And Testing Available In Australia
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
MDS-TanP comes standard with 40 high-pressure digestion vessels, achieving fully enclosed high-pressure digestion. It can also meet the digestion needs for tough samples. Having the fixed quantity pressure-relief design and automatic over-pressure-relief protection to prevent vessel burst due to high pressure, MDS-TanP is the perfect combination of high-throughput digestion and high-pressure ...
-
Manufactured by Boromondbased in CHINA
Portable BDD sewage degradation analysis experimental equipment is mainly used for chemical, pharmaceutical, printing and dyeing, machining wastewater and landfill leachate and other refractory wastewater treatment and analysis experiment. The folding flow channel inside the portable BDD testing equipment increases the contact area between the solutionto be treated and the electrode plate, ...
-
Manufactured by Cautus Geo ASbased in NORWAY
A new geotechnical sensor with the latest MEMS technology from manufacturer SENSR for dynamic and continuous monitoring of vulnerable structures and unstable land. It can be used to geomonitorering of landslides, bridges, buildings, tanks and other structures. CX1 is a robust, easy to use and highly accurate sensor to detect tilt in two axes, movements/vibration in 3 axes and temperature. Data ...
-
Manufactured by Sentek Instrument LLCbased in USA
Distributed acoustic sensing (DAS) is demanded in many applications. Traditionally, fiber optic DAS systems are based on time domain detection of Rayleigh backscatters produced by a laser pulse in the sensing fiber. Due to the extremely weak nature of the Rayleigh scattering, these systems often have an acoustic detection sensitivity limited to the order of nanostrains, as a measure of the ...
-
Manufactured by Pizzi Instruments S.r.l.based in ITALY
To monitor the tensional states of concrete tunnel linings, hydraulic cells of rectangular or square shape are used, also called NATM, associated with New Austrian Tunneling Method, often known as Sprayed Concrete Lining (SCL) and Sequentional Excavation Method (SEM) . This pressure cell is used both for the measurement of tangential pressures in the coatings of tunnels and radial pressures in ...
-
Manufactured by ESS Earth Sciencesbased in AUSTRALIA
Perfect for structural health monitoring, the Gecko SMA is our all-in-one strong motion triaxial (East-West, North-South, Up-Down) accelerograph combining user-friendliness with the reliability and simplicity of a MEMS accelerometer, available in ±2g, ±5g, ±10g, and higher full scale ranges, all the way up to ±400g. Data storage is simple and continuous, streamed onto ...
-
Manufactured by Büchi AGbased in SWITZERLAND
A clean-room setup and other materials are available to meet your specific process requirements. With the miniPilot® product family (reactor, nutsche filter, scrubber) we offer miniplant pilot reactors for chemical process development, scale-up, process simulation and kilo-scale production. The reactors' explosion proof design (ATEX) and inert materials allow safe processing of solvents and ...
-
Manufactured by Bridge Diagnostics, Incbased in USA
Our STS4-4 Terminal Node is a 4-channel LAN data acquisition, DAQ, system designed to support a wide array of sensors such as strain transducers, LVDT’s, and accelerometers. Its on-board temperature correction feature makes it ideal for recording structural responses from up to 1,000 data channels for weeks, months, or years. Each STS4 node is based on the very reliable ethernet LAN ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Model 5000 Vibrating Wire Tension Load Cell can be used in any tension monitoring Applications. For easy Application, the cell Features female threads in each end. Custom sizes are ...
-
Manufactured by Roctest - part of Nova Metrix LLCbased in CANADA
The SOFO VII reading unit is a universal reading unit able to measure both SOFO (Interferometric) and MuST (Fiber Bragg Grating) sensors. The system is designed for static, long-term measurements. Each channel can be software configured for one of the two technologies. The SOFO VII is integrated in a compact steel housing designed for permanent installation in any structure that requires ...
-
Manufactured by Maschinen- und Landmaschinenfabrik Husmann GmbHbased in GERMANY
The HFG VI with its 478 kW Scania engine is the most powerful machine of the HFG series. The infeed hopper with a length of 4.800 mm and a width of 2.400 mm is equipped with an infeed belt. The infeed material is mecanically conveyed via infeed belt to the rotor with freely swinging hammers. The infeed opening ha a height of 660 mm and a width of 1.700 mm. Thus, material of up to 350 mm can be ...
-
Manufactured by Hydromea SAbased in SWITZERLAND
LUMA 500ER long-range optical communication node is perfect for underwater infrastructure, AUV data harvesting, subsea networks and bottom to surface data upload. LUMA – the most compact, power efficient and infinitely programmable through-water wireless optical nodes for data transfer anywhere from the splash zones down to 6’000m ...
-
Manufactured by MC Monitoring SAbased in SWITZERLAND
Electrodynamic velocity vibration sensor has been widely used in measuring the low frequency absolute vibration of machine bearing. In addition, the Electrodynamic velocity sensor can also be used for diagnostic purposes, providing solutions to problems that may develop on rotating machinery. Some of these problems include early shaft crack detection, shaft misalignment within the machine casing, ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
ParticleTrack G600B with FBRM technology is a versatile probe-based instrument that is inserted directly into laboratory reactors and certain production processes to track changing particle and droplet size and count in real time at full process concentrations. Particles, particle structures and droplets are monitored continuously, as experimental conditions vary, providing scientists with the ...
-
Manufactured by 4Z Electronics Automation and Welding Systemsbased in TURKEY
SMC10 is a Smart Mitigation Cell which allows controlled DC current drain to ground in the situations where AC, DC interference or telluric effect cause over protection on a cathodically protected structure. ...
-
Manufactured by Advanced OEM Solutions (AOS)based in USA
Perfect for Thru-Transmission, research and other demanding ultrasound applications. Low Frequency option also opens door for applications like concrete inspection, guided wave and other structural health monitoring research. OEM-MC2 connects to a PC via Gigabit Ethernet, and is powered with 12V. Its unique technology allows to acquire the A-scan with 27-bits of resolution, so analog gain is not ...
-
Manufactured by Geosense Ltdbased in UNITED KINGDOM
VWCM-4000 crack meters are used to measure movement across surface cracks and joints in concrete, rock, soil and structures. They consist of a sensor outer body tube and an inner free-sliding rod which is connected at the internal end to a vibrating wire sensor by a spring. At the sensor end of the outer body and the external end of the rod anchors are attached which can be fixed either side of a ...
-
Manufactured by Resensys, LLCbased in USA
Using Resensys’s high precision tilt SenSpot sensors (HRT), movement, settling, deformation and abnormal tilting of bridge piers are detected at an early stage, before such issues become major problems or lead to safety compromise and/or road closure. High precision tilt data helps calculate vertical/horizontal displacement of piers, pylons and ...
-
Manufactured by ESG Solutions - a Spectris Companybased in CANADA
ESG offers complete microseismic monitoring solutions for a variety of geotechnical applications including underground storage facilities (LPG sites and nuclear waste repositories), vibration thresholds and blasting and monitoring of structures such as dams, high speed rail tracks, bridges and tunnels. Our underground storage systems incorporate microseismic, temperature and pressure data into ...
-
Manufactured by Micromega Dynamics SAbased in BELGIUM
Our new wireless vibration recorder, the RECOVIB Tiny measures vibrations and shocks in all three axis. It is extremely practical for a vibration diagnosis, offering up to 6 hours of measurement. Its wireless technology and intuitive operation provides substantial time savings in the performance of your measurements. It is the only type of vibration and shock recorder that allows several sensors ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you