Sulfur Dioxide (SO2) Monitoring Equipment For Monitoring And Testing In Virginia
-
based in USA
The MC-6410 Multi-Gas Monitor is a self-contained atmospheric monitoring solution in a rugged, NEMA 4X polycarbonate enclosure. Capable of monitoring multiple gas types simultaneously in dozens of unique configurations, the sensors operate at low current for increased energy efficiency. Offering a wide range of communications options, the MC-6410 has the ability to operate on multiple network ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using high-resolution ultraviolet (UV) technology in a dual-beam, multiple-wavelength configuration, the 900 is specifically designed to meet the demanding analytical requirements of modern sulfur recovery processes. Capable of measuring up to four species simultaneously, this air demand analyzer is uniquely capable of monitoring off-ratio applications, providing accurate chemical concentration ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
A rugged oxygen analyzer for either parts per million or percent level measurements in natural gas. Unaffected by contaminants or flow rate, the OXYvisor has no cross-sensitivity to common contaminants in natural gas, including carbon dioxide and hydrogen sulfide, and will deliver an accurate oxygen measurement every time. ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 888 utilizes ultraviolet (UV) spectroscopy to accurately monitor hydrogen sulfide (H2S) and sulfur dioxide (SO2) concentrations in sulfur recovery tail gas. The analyzer delivers next-level reliability, with automatic flow control, flange temperature alarm and an extended ambient temperature range providing solutions to the most common external failure ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Housed in an explosion-proof package, the 932 is a multi-component ultraviolet (UV) photometric gas analyzer which measures up to five gas species at the same time. Hydrogen sulfide (H2S) and sulfur dioxide (SO2) are the primary measured components. The analyzer can also be configured to measure carbonyl sulfide (COS) and/or carbon disulfide ...
-
based in USA
The SmartCEMS®-EU PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet EU standards for combustion turbines and gas/oil fired boilers, or heaters. The data acquisition and handling ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and mass flow measurements in one device, with an optional ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and nitric ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using proven ultraviolet (UV) technology, the 930 identifies potential safety risks in sulfur storage locations through simultaneous hydrogen sulfide (H2S) and sulfur dioxide (SO2) measurements. Capable of stable, sensitive measurements ranging from parts-per-million (ppm) to percentage levels, the analyzer offers output alarms for the lower explosive limit of H2S and smoldering fire level of ...
-
based in USA
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for use in reference method testing both for model ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you