Surface Analysis Applications available in Madagascar
-
Premium
Measurements Solutions for Optical Components
Accurate qualification of optical components is a vital source of feedback to an optical manufacturing operation. From plano to spherical to aspheric shapes, common measurements include surface form error, waviness and roughness. Depending on the type of part and its application, material and geometric properties such as transmitted wavefront, homogeneity, wedge, parallelism, thickness variation, and radius of curvature may also require careful control. Optical components are the building blocks of optical ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Thin Glass
Innovative technology enables form measurement of both front and back surfaces of thin optics, ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
The measurement of surface texture can be critical to ensuring optimal performance in an imaging system. Standard aspheric surface fabrication techniques including, diamond turning and sub-aperture polishing, can leave traces of the cutting process on the final product. Issues with surface texture on a lens can lead to a lack of image uniformity, scattered light, and even diffraction in the final image. Zygo 3D systems can quickly detect surface texture issues using full area, high resolution optical ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Optical Measurement of Films & Coatings
Precise characterization of thick and thin film topography and thickness, and substrate topography. There are many applications in which the deposition and control of films and coatings is critical to enabling functionality or efficiency of devices, including consumer electronics, semiconductors, optics and many more. Such advanced devices often demand accurate characterization of film topography and layer thicknesses to ensure high quality and ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Chemical Water Treatment for membrane treatments
Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Measurements Solutions for Additive Manufactured Parts
Additive manufacturing (AM) is a relatively new and growing technique which is complimentary to more conventional, subtractive methods like machining. The major advantage of AM is that it allows the manufacturing of complex geometries and the creation of internal features that cannot be easily produced using subtractive methods. One major disadvantage of AM, however, is the reduced control of surface quality and dimensional ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Paper & packaging solutions for coating sector
The Precipitated Calcium Carbonate (PCC) Advantage for Coated Woodfree (Freesheet) Papers. Five major particle parameters affect a pigment’s performance on the surface of paper: shape, size, size distribution, surface chemistry, and surface area. Manipulation of these variables makes it possible to control the structure and brightness of the coating ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Laboratory instruments solutions for surface finishing industry
The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know about ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
XRF Spectrometers solutions for coating thickness analysis sector
Coating analysis can tell you a lot about the contents of material, item, etc. The simplest example: one can measure the content of a detail made from a certain alloy without its damage. Another way to apply the analysis is by measuring the jewelry to identify harmful or excessive impurities and gilding. Coating thickness analysis finds its way to be applied in almost every sphere of heavy and light industry, building, utility, ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Measurements Solutions for Radius of Curvature
ZYGO laser interferometers are powerful and precise instruments for measurement and characterization of optical components and systems. One of the most common applications include the measurement of the radius of curvature. The radius of curvature is a fundamental and functional parameter of spherical optical surfaces, which requires quality control during ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Wear & Volume Analysis
Measuring volumetric properties of a surface is most often used in wear analysis of lubricated surface but has uses in many other applications such as adhesion, porosity, and particle ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Specialized Asphere Applications and Analysis
Beyond surface characterization, Zygo solutions offer feedback from the metrology setup to aspheric and freeform surface ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Senix toughsonic sensors for a critical floating dry dock applications
A dry dock is a narrow land-based basin or vessel that can be flooded to allow a load to be floated in, then drained to allow that load to come to rest on a dry platform. Dry docks are used for the construction, maintenance, and repair of ships, boats, and other types of watercraft. A floating dry dock is in the form of “U” structure which is mainly used to carry ships that need repair or maintenance. Many regular sea-going, small and mid-size vessels also dry dock in a floating dock. The ship is ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Measurements Solutions for Optical Material Homogeneity
An important property of an optical component is the variation of the refractive index of the material from which it is made, broadly referred to as homogeneity. Material inhomogeneity causes variation of the refractive index in a glass, which can be in the form of sharp, cord-like regions called striae or it can occur as a gradient of the refractive index through a larger region of the sample. Material index variations must be qualified to ensure their impact is within tolerance for a particular optical design ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Measurements Solutions for Form & Flatness
Manufactured surfaces can take on many shapes and sizes. For surfaces where the characterization of shape is function critical, ZYGO laser interferometers and 3D optical profilers stand out with sub-nanometer repeatability of non-contact surface data. Incorporating industry standards for form and flatness into Mx™ analysis software creates a single stop measurement tool for surface inspection. Explore the solutions for your application in surface form and flatness metrology ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Independent particle characterization services for dietary supplements
Concurrent with the U.S. Food and Drug Administration’s final rule establishing regulations to require current good manufacturing practices (cGMPs) for dietary supplements, PTL can offer cGMP services to all supplement manufacturers. PTL has sustained its FDA registration since 1994, which involves rigorous inspections by FDA every 2 years or sooner. According to the final rule, proper controls must be in place for dietary supplements to be produced in a consistent manner for identity, purity, strength, and ...
By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).
-
Software Solutions for Sustainable Stormwater Design
Our world is on the cusp of a stormwater design revolution - a change in the theories of stormwater management that we have held for 200 years which now call us to consider the impact of water quantity and quality on our future generations. Government agencies and their citizenry are calling for innovative new ways to ensure that our natural water resources remain vital and ...
By Innovyze based in Portland, OREGON (USA).
-
Seismic borehole and surface solutions for dyke investigation sector
Strength characterization: Seismic methods are suitable to study the strength characteristics of dyke and dams. Seismic measurements are sensitive to density changes and compactness of soils. Therefore, areas with inadequate compactness of dykes can be detected. A correlation with SPT/CPT (Standard/Cone Penetration Testing) is often done because these methods also depend on the mechanical properties of the ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Water monitoring equipment for surface water industry
Easily and accurately assess the physical, chemical, and biological characteristics of any aquatic system. From spot sampling to long-term remote monitoring, In-Situ has the right equipment for your surface water quality monitoring ...
By In-Situ Environmental based in Fort Collins, COLORADO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you