Telemetry Applications available in Suriname

  • Premium

    Water monitoring technology for flood warning

    Flood warning systems built into hydrological stations are used to notify local emergency authorities in the case of a flood event.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for groundwater

    Measuring groundwater level or depth-to-water is critically important for identifying long term trends, including declining water levels, saltwater intrusion, seasonal variations, aquifer recharge, artificial aquifer storage and recovery, and level status for drinking water. Receiving groundwater data via remote data transmission from one of the many OTT telemetry options available saves time and resources spent in the field.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Water monitoring instruments by waste water testing

    Waste water is one of the most important environments to monitor. Increasingly strict regulations require cleaner waste water discharges into both watercourses and sewer systems. Monitoring waste water before discharge allows you to detect any potential pollutants and trigger re-treatment, so that these can be removed. Aquaread designs and manufactures a range of water testing equipment that is ideal for various environments and deployments.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Visual inspection solutions for the boroscope and video boroscope for remote visual inspections

    Boroscopes (aka Borescopes)are useful and valuable tools in any industry where remote visual inspections are important. Traditional, non-video techniques for tracking an object, do not work as well within the environment a boroscope typically encounters. Using these devices you can get clear visual access to many hard-to-reach places without a complete tear-down of the components. There are two main types of boroscopes - rigid and flexible. You can get flexible boroscopes with 2 way and 4 way tip articulation, as well as devices without tip articulation.

    By Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Industrial solutions for structural health monitoring

    Real time monitoring of structures is an excellent field of application for wireless sensor networks. ADVANTICSYS has provided solutions for the monitoring of structure in different fields, from bridges, where the vibration has to be controlled both in the construction and operation phase, to cultural heritage buildings with their structural integrity under risk.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Temperature monitoring in a rotary kiln

    Taking measurements on rotating equipment, such as a kiln or rotary table, usually requires a complex and expensive system of cabling. Even taking precautions and using specialized equipment doesn’t eliminate cable tangles and breaks. The SureCross Wireless Network eliminates complexities associated with data acquisition from rotating and moving machinery such as a rotating kilns in cement or composting industry. Crucial temperature data is acquired using a thermocouple and transmitted from the FlexPowered SureCross Nodes to a remote Gateway in the plant’s control center.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Remote Telemetry / Communications

    GOES.hopper is a fully turnkey GOES satellite-based communication solution for new or existing monitoring stations with SDI sensors. Now you can get groundwater data to your desktop, reducing manpower and site visits.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Wireless monitoring in EX areas

    The DX 99 battery operated remote IO unit allows to monitor sensors situated in EX areas (zone 0 and 20) whithout the need for costly and complicated cable runs. Thanks to elaborate power management, the radio unit can power the sensor from the battery (up to 19V for a warm up time of 1 min)

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Wireless industrial I/O applications for process control

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these examples of wireless installations for process control.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Water Quality in watersheds

    Metro Vancouver serves an area of 282,000 hectares (approximately 1,088 square miles). The drinking water supplied to the 2.3 million residents of this growing community is sourced from three major reservoirs – Capilano, Seymour and Coquitlam. These vast watersheds, located in the mountains north of Vancouver, gather billions of gallons of snowmelt and rainwater. From these reservoirs, the water is treated and filtered to remove turbidity and potentially harmful micro-organisms ensuring quality drinking water is available to homes throughout the Metro Vancouver district.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Automated solutions for the hazardous waste pit dredging

    Liquid Waste Technology’s electric and diesel driven dredges can improve safety for workers dredging hazardous materials. Our custom built dredges can be equipped with remote control to allow workers to stand up to 762 meters (2500 feet) away from the toxic area, increasing their safety. Liquid Waste Technology can build dredges with automated controls, that dredge entire ponds using PLC controls. This increases workers safety and productivity in hazardous dredging applications.

    By Liquid Waste Technology LLC - Mud Cat based in New Richmond, WISCONSIN (USA).

  • Water measurement systems & sensors for rainfall intensity logging

    ISODAQ telemetry systems are low-cost and very ease to use and configure, enabling you to bring your field data to your desktop PC without needing to operate complex IT infrastructure.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Wireless multiple parameter monitoring

    Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to operate for years on a single DX81 battery power supply.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • World`s First Integrated Wireless Radar Level Transmitter For Water.

    Based on the wireless radar technology SenZ2 provides a complete solution for remote, real-time monitoring and logging of water levels. For the water sector real-time insights in water levels is key. Accurate level-measurement data can result in improved policy, reduction of risks and direct cost savings. The Wireless Level Radar (WLR05-2G/001) can monitor waste water and overflow, surface water and groundwater in remote places without any power source. With radar as the most reliable and cost-effective level measurement technology, there is no reason to accept a lack of insights in water levels.

    By SenZ2 BV based in NETHERLANDS.

  • Meteorological Monitoring

    FTS designs complete, turn-key systems for a variety of environmental monitoring applications. Our systems are based upon the Axiom datalogger—a key technology that deliver rugged reliability in any environment, simplicity of operation, low maintenance costs, and extremely accurate data.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Environmental monitoring solutions for the industrial sites industry

    Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the industry`s largest in-house engineering staff and a worldwide network of trained, equipped local representatives.

    By QED Environmental Systems, Inc. - A Graco Company based in Dexter, MICHIGAN (USA).

  • Environmental monitoring solution for mining industry

    Control of fugitive dust in the mining industry and in particular open cut operations is of great concern to the local community, environmental protection authorities and of course the mine operators. Dust emissions can cause both nuisance effects as well as health effects and so mines typically employ multiple dust suppression activities to minimise their environmental impact. Many of these activities can be expensive to operate and depending on environmental conditions, at the time, may not actually be effective or necessary.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solutions for the mining sites industry

    Pumps, control systems and supplies for groundwater sample collection at mine sites in the U.S. and around the world. For more than 25 years, QED has been the leading supplier of innovative pumps, control systems and supplies for groundwater sample collection at mine sites in the U.S. and around the world. We’ve specialized in deep well sampling systems, to depths of 1500 ft. Now, our remote data collection systems allow you to monitor your sampling system performance online from any computer, anywhere.

    By QED Environmental Systems, Inc. - A Graco Company based in Dexter, MICHIGAN (USA).

  • Remote monitoring stations

    The Water Survey of Canada, a division of Environment Canada, is a federal government agency responsible for collection, interpretation and dissemination of water source data and information. As a division of Environment Canada, the Water Survey of Canada (WSC) covers a vast range of topographical environs from Arctic Canada to the US border with elevations varying from sea level to over 13,000 feet (4,000 metres). An estimated 7% of the world’s renewable water supplies are found in Canada. Canada’s hydrology is incredibly diverse thanks to a wide range of bio-physical ecozones. WSC operates in partnership with all of the Canadian provinces, territories and other agencies, operating over 2,500 active hydrometric gauges across the country. The hydrologic and socioeconomic diversity found in Canada makes water resource management incredibly challenging.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you