Temperature Monitoring Applications in Australasia

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company Distributor in NEW ZEALAND.

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately wetted.

    By Myron L Company Distributor in NEW ZEALAND.

  • Premium

    Monitoring solutions for the flow monitoring areas

    Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be used in extremely dust environments such as SCR’s when dust loadings exceed 10g/m3. The VCEM 5100 is in full compliance with EN/ISO 16911 part 2.

    By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

  • Premium

    Tunnel solutions for the visibility monitor

    The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is also equipped with the optional PT 101 temperature sensor to accurately measure ambient air temperature in a range of -15 to 1050C.

    By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

  • Premium

    Monitoring solutions for the gas analysers areas

    Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these gases plus moisture, pressure and temperature.  The analyser can be configured for single channel operation to monitor any of these gases plus CH4 and HCl.

    By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

  • Premium

    Infrared temperature measurement for iron and steel

    LAND, acknowledged leaders in the field of temperature measurement, have supplied the iron and steel making industry throughout the world with temperature measuring equipment for over 60 years.

    By AMETEK Land Distributor in Victoria, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Automotive Industry

    With new innovations in the automotive industry, the need for accurate and robust measurement methods has become relevant. IST’s sensing solutions satisfy this need. Thin film platinum temperature sensors capable of measuring up to +1000°C provide precise measurement solutions for diesel engine applications. Additionally, thermal mass flow sensors are capable of monitoring vital fuel and engine systems in these harsh conditions. IST’s humidity sensors are also largely applicable in the control of cabin conditions.

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Measurement and Control Industry

    Measurement and control is an essential element in determining the effectiveness of products in the Process Control industry. A wide variety of applications are met in this industry by IST’s diverse family of temperature sensors. Additional process control applications are met by unique humidity and flow sensor products offered by IST.

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Premium

    Meteorological sensors for industrial monitoring

    Ambient condition changes can happen anywhere in production lines 24/7. Are you the first to know about it? Whether you’re in pharmaceuticals, banking, manufacturing or other technology, where monitoring of ambient conditions like temperature, humidity or air pressure count - Business doesn’t stop. We offer a wide range of product to detect every change in ambient conditions - to have your threshold values always under control!

    By G. Lufft Mess- und Regeltechnik GmbH Distributor in Caringbah, AUSTRALIA.

  • Premium

    Infrared temperature measurement for other industries

    Ceramics. Chemical/Petrochemical. Food/Medical/Biological. Paper/Rubber/Textiles. And more..

    By AMETEK Land Distributor in Victoria, AUSTRALIA.

  • Premium

    Infrared temperature measurement for Mineral Processing

    LAND, acknowledged leaders in the field of temperature measurement, have supplied the Mineral Processing industry throughout the world with temperature measuring equipment for over 60 years.

    By AMETEK Land Distributor in Victoria, AUSTRALIA.

  • Premium

    Infrared temperature measurement for metal processing

    LAND manufacture a range of measurement instruments specifically designed for metals processing industries which are used throughout the world.

    By AMETEK Land Distributor in Victoria, AUSTRALIA.

  • Premium

    Cement materials for Thermocouples industry

    Thermocouples | Samplers / Sensors / Tips / Tube; Potting application of quartz into ceramic body requiring high thermal properties. Adhesive application to affix thermal insulating tape to cardboard. Coating application for sampling caps.

    By Sauereisen Inc. Distributor in AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for controlling the relative humidity of an environment due to their rapid response times and accuracy over time. Thermal mass flow sensors also have applications in the HVAC industry as an indicator of duct airflow

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Test and Measurement Industry

    Test and measurement is an industry in which highly accurate and stable sensors are crucial. IST’s full line of temperature, humidity, and flow sensors has applications in this industry. Our sensors can be directly integrated into instruments including assemblies, probes, meters, and more.

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems plc (ITS) Distributor in Mitcham, AUSTRALIA.

  • Analysis of aqueous solutions

    IR-Spectroscopy is not limited to gases, solid materials and pure liquids but also facilitates the measurement of solutes in aqueous media. Though, due to the strong and temperature dependent absorption of water, the usage of conventional IR-transmission and ATR accessories is not very suitable for the analysis in water. The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically about 1 minute.

    By Bruker Corporation Office in Preston, AUSTRALIA.

  • Noise monitoring solutions for machine diagnostics

    Due to production and assembling tolerances, wear and load variation, the moving parts in any rotating machine will sooner or later cause annoying vibrations that eventually lead to breakdowns.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in North Ryde, PO Box 349, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you