Temperature Sensors Applications available in Australasia
-
Premium
Blowers and compressors designed for better solutions in cement applications
Safety is the number one priority for the most challenging applications in cement plants operations. That‘s why AERZEN blowers, rotary lobe compressors and screw compressors for the cement industry are built with the highest standards to guarantee a safe and reliable operation in the high demanding cement ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Electronic pressure measurement devices for Environmental, water, sewage water and recycling
The acquisition of fill and gauge height is a central requirement in this field. BD|SENSORS here deploys the highly reliable method of hydrostatic fill level measurement. In practice this is implemented in different variations - be it in the form of level probes for surface and ground water applications, submersible probes for wastewater treatment plants and storm water overflow tanks, or down to fill level probes for tank farms and in container construction. In addition to probes of any imaginable type required ...
By BD|SENSORS GmbH based in Thierstein, GERMANY.
-
Premium
Advanced technology solutions for coastal research industry
Aanderaa's coastal research offering includes a variety of shallow water sensors and instruments to be deployed either real-time or autonomous. In coastal research, Aanderaa offers reliable, compact, low-power consuming, and user-friendly sensors and systems measuring a wide range of parameters at the highest quality. We offer "Smart Sensors" to measure Currents, Oxygen, Conductivity/Salinity/Density, Wave/Tide, Vented Wave/Tide, and Pressure. All smart sensors have in-built high-quality temperature sensors and ...
By Aanderaa, a Xylem Brand based in Nesttun, NORWAY.
-
Premium
Gas detection in water & waste industry
Wastewater and potable water treatment facilities produce and use various toxic and explosive gases such as methane, hydrogen sulfide, ammonia, carbon dioxide, carbon monoxide, chlorine, ozone, etc. In addition, in confined spaces, the increased formation of toxic gases and the decreased concentration of oxygen make these areas particularly dangerous for workers. The risk can be evaluated by measuring worker exposure to various pollutants present in the air in work areas. The measured concentrations are then ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Cement & Lime Industry Emissions Analysis & Monitoring
A key issue in the measurement of the products of combustion in Cement and Lime industries is the high levels of particulates. The Procal 2000 in situ analyser's heated probe option is especially suited to this industry as it efficiently deals with variations in process temperature, keeping the probe above the sample dew point and safe from corrosive ...
By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.
-
Thin-film Measurement Technology for Building Automation Industry
The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for ...
By Innovative Sensor Technology (IST) - an EndressHauser Company based in Las Vegas, NEVADA (USA).
-
Pipeline Monitoring Systems for Health Monitoring
Pipeline management presents challenges that are quite unique. Their long length, high value, high risk and often difficult access conditions require continuous monitoring as well as an optimization of maintenance interventions. The main concern for pipeline owners comes from possible leakages that can have a severe impact on the environment and put the pipeline out of service for repair. Leakages can have different causes, including excessive deformations caused by earthquakes, landslides or collisions mobile ...
By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).
-
Radiation Tolerant Camera Systems for Nuclear Monitoring
TheRADCAMis the proven standard in advanced visual process monitoring for nuclear plants and facilities. With its patented neutron-absorbing outer body, its high tolerance to gamma radiation, and an effective onboard cooling system, the RADCAM is a camera that is designed to survive the harshest of ...
By ISEC Monitoring Systems AB based in Helsingborg, SWEDEN.
-
High tech aeronautic solutions
THERMOCOAX Aeronautic Thermal Solutions: We manage all steps of entire aeronautic thermal projects from the design through qualification and up to the final product. Our mission is to develop state-of-the art, complete aeronautic solutions and this is through advanced innovation from conception, to prototype development right the way through to production. We offer tailor-made anti-icing, heating tools and temperature sensor systems, providing our aeronautic customers with safer, cleaner and the most cost ...
By Thermocoax SAS based in Suresnes Cedex, FRANCE.
-
Thin-film Measurement Technology for Automotive Industry
With new innovations in the automotive industry, the need for accurate and robust measurement methods has become relevant. IST’s sensing solutions satisfy this need. Thin film platinum temperature sensors capable of measuring up to +1000°C provide precise measurement solutions for diesel engine applications. Additionally, thermal mass flow sensors are capable of monitoring vital fuel and engine systems in these harsh conditions. IST’s humidity sensors are also largely applicable in the control of ...
By Innovative Sensor Technology (IST) - an EndressHauser Company based in Las Vegas, NEVADA (USA).
-
Paper & Pulp Industry Emissions Monitoring
The Procal 2000 emissions analyser is ideally suited to the harsh environments associated with Paper & Pulp Plants. The in situ, multi-component Continuous Emission Monitoring (CEM) system has an integrated auto-zero and calibration facility, thereby removing the need for intervention by maintenance staff under normal ...
By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.
-
Tunnel solutions for the visibility monitor areas
The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
-
Thin-film Measurement Technology for Measurement and Control Industry
Measurement and control is an essential element in determining the effectiveness of products in the Process Control industry. A wide variety of applications are met in this industry by IST’s diverse family of temperature sensors. Additional process control applications are met by unique humidity and flow sensor products offered by ...
By Innovative Sensor Technology (IST) - an EndressHauser Company based in Las Vegas, NEVADA (USA).
-
Thin-film Measurement Technology for Test and Measurement Industry
Test and measurement is an industry in which highly accurate and stable sensors are crucial. IST’s full line of temperature, humidity, and flow sensors has applications in this industry. Our sensors can be directly integrated into instruments including assemblies, probes, meters, and ...
By Innovative Sensor Technology (IST) - an EndressHauser Company based in Las Vegas, NEVADA (USA).
-
Optical pH, oxygen and temperature sensor solutions for 2D and 3D cell culture sector
Oxygen and pH are key analytes in the wide field of life sciences, for example biotechnology, cell biology or toxicology. PyroScience offers outstanding solutions for oxygen and pH sensing in a variety of applications such as 2D and 3D cell culture, tissue engineering and Organ-on-a-Chip ...
By PyroScience GmbH based in Aachen, GERMANY.
-
Nitric Acid Production Emissions Analysis
The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg. The analyser can be supplied in both in situ and extractive configuration to suit customers’ ...
By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.
-
Remote temperature monitoring
To abide local regulations, and ensure efficient and effective composting, the temperatures of the windrows must be measured and logged constantly. With accurate temperature measurements, you can determine the optimum time to turn the windrows for quicker compost production. Time consuming and error prone manual data collection is eliminated using a SureCross FlexPower Node equipped with three thermocouples to automatically monitor the temperature at three depths within a compost windrow. Temperature sensor ...
By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).
-
Weather monitoring technology solution for agricultural weather systems sector
A Better Weather Solution For Farms & Growers: RainWise Agricultrual Weather Monitoring Systems help you get better data faster so you can plan, react, and grow ...
By RainWise Inc. based in Boothwyn, PENNSYLVANIA (USA).
-
Thin-film Measurement Technology for Appliance Industry
Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s ...
By Innovative Sensor Technology (IST) - an EndressHauser Company based in Las Vegas, NEVADA (USA).
-
Measure Temperatures Devices for Optimize the Quality of the Road Network
All year round the roads are subject to strong climatic variations. In winter, partial or total freezing and thawing cause significant damage to the asphalt mixes: heaving, cracks, subsidence, potholes, etc. The temperature, the length of the freeze-thaw period and the speed at which frost penetrates the asphalt are all factors influencing the sensitivity of the pavement and favoring the appearance of distresses. For the companies in charge of the construction and maintenance of road networks, being able to ...
By Adeunis based in Crolles, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you