Testing Equipment Equipment For Monitoring And Testing Available In North Carolina
-
PremiumManufactured by Trace2o Ltd.based in UNITED KINGDOM
The AquaSafe WSL50 Plus elevates on-site water testing with digital precision and enhanced portability. This advanced version of our trusted WSL50 kit is designed to meet the rigorous standards of field professionals and emergency response teams, offering a comprehensive solution for essential water quality testing. By incorporating digital pH and conductivity testing alongside visual chemical ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
The CorTalk RMU1-ER collects and transmits a measurement of the corrosion rate near the pipe surface through the use of sacrificial electrical resistance (ER) probes as frequently as every few hours via satellite or cellular network. This provides technicians with highly detailed, near real-time measurement data that is useful in determining the underlying cause of corrosion and the ability to ...
-
PremiumManufactured by Challenge Technologybased in USA
Automated Loaded Wheel Tracker model LWT Test for rutting and stripping qualities of asphalt ...
-
Manufactured by Nanjing BKN Automation System Co.,LTDbased in CHINA
The magnetic traces are used to show defects in the ferromagnetic material and its products. The magnetic particle inspection method can detect the exposed surface, and can not directly observe the small defects with the naked eye or with the aid of a magnifying glass. It can also detect the unexposed surface, but the near-surface defects buried a few millimeters below the ...
-
Manufactured by Boromondbased in CHINA
Portable BDD sewage degradation analysis experimental equipment is mainly used for chemical, pharmaceutical, printing and dyeing, machining wastewater and landfill leachate and other refractory wastewater treatment and analysis experiment. The folding flow channel inside the portable BDD testing equipment increases the contact area between the solutionto be treated and the electrode plate, ...
-
based in USA
The industry-leading performance of the HFTAP K32 product joins FormFactor’s series of High Frequency Test probe cards, including the K10, K16 and K22 used for testing 1.0 GHz, 1.6 GHz, and 2.2 GHz DRAM devices. Advanced PCB technology, exclusively available from FormFactor, allows the fastest communication between the Device Under Test (DUT) and Automated Test Equipment (ATE). By utilizing ...
-
Manufactured by Powermetrixbased in USA
The PowerMaster 4 Series Automated ANSI Meter Tester boasts many features that make it the most functional, versatile, and user-friendly meter tester on the market today. It is a closed-link meter testing solution that sources current up to 30A or 50A (depending on model) and operates on all voltages up to 530V with no switch changes required. Our automatic meter testing equipment also ...
-
Manufactured by Chroma ATE, Inc.based in USA
Chroma 11210 battery cell insulation tester is an instrument used for accurately measuring leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials. In addition to standard LC/IR measurement, the 11210 has a unique function that detects partial discharge (PD) or flashover that may have occurred inside the insulation material during ...
-
Manufactured by Sterlitech Corporationbased in USA
Sepa CF II Membrane Cell System is a lab scale cross-flow membrane filtration unit that provides fast and accurate performance data with minimal amounts of membrane, product, expense, and time. Its unique patented* design simulates the flow dynamics of larger, commercially available membrane elements. Users can vary the operating conditions and fluid dynamics over broad ranges. Whether used as a ...
-
Manufactured by Sterlitech Corporationbased in USA
Our collection of Hollow Fiber Membranes provide larger process capacity with easy scale-up and scale-down processes. These reusable cartridges feature a PES membrane with higher membrane flux for greater capacity and yield. The cartridges are also made with standard connections and consistent design to ensure hassle-free scaling. Hollow Fiber Membrane Product Benefits: Antifouling ...
-
Manufactured by International Medcom Inc. (IMI)based in USA
The World Famous Inspector Keeps Getting Better; Inspector BLE works with smart phones and computers across all the platforms. Log and Map Data. Share Data with RadResponder, Safecast, the World, or create your own Private ...
-
Distributed by S3 Instrumentsbased in CANADA
Purpose: The Oxygen Bomb Calorimeter has been widely used to determine heat value of coal, oils, tar, and paraffin, etc. It is the desired instrument for power plants, smelting, cement, and petrochemical, scientific research institutes, and colleges and ...
-
Manufactured by International Medcom Inc. (IMI)based in USA
The IMI Inspector Alert™ V2 measures alpha, beta, gamma and x-radiation using a 2-inch “pancake” GM detector with high sensitivity to common beta and alpha sources. The easy-to-read digital display shows readings in your choice of µSv/hr, mR/hr, CPM, or CPS. The Total/Timer feature allows timed readings from one minute to 40 hours for precise measurement of low level ...
-
Manufactured by Sterlitech Corporationbased in USA
The Sterlitech HP4750X Stirred Cell is designed and manufactured to provide many years of trouble-free operation. The HP4750X Stirred Cell is just one of a number of products that Sterlitech manufactures for membrane research and small-scale production. The instruction manual describes the functions, features, configuration, start-up, and operation of the HP4750X Stirred Cell. HP4750X Stirred ...
-
Manufactured by Applied Precision Ltd.based in SLOVAKIA
Multifunction portable signal source with integrated working standard of power and ...
-
Manufactured by Sterlitech Corporationbased in USA
The Valisette ceramic test cell kit is made of 316L stainless steel and is designed for choosing the best crossflow/tangential flow ceramic membrane for your separation procedure. The Valisette ceramic test cell unit is 250mm long and works with tubular ceramic membranes. The recommended re-circulating flow rate is between 200 and 600 liters/hour. Additional laboratory filtration equipment ...
-
Manufactured by ForTest Groupbased in ITALY
M2710 is the digital portable calibrator for micro flow of ForTest® M Series. Enclosed in a container of anodized aluminium with shatterproof plexiglass front, we find a completely new circuit board and a mass flow meter sensor, for direct measurement of ...
-
Manufactured by Pacorr Testing Instruments Pvt. Ltd.based in INDIA
The Top Load Tester for PET / Plastic Bottles, the Digital Model is used to measure the buckling strength of PET bottles or containers. The equipment can recreate the real-life compressive load a PET bottle can experience during storage or in transportation. The machine helps the user to evaluate the capacity of a bottle specimen against vertical compressive ...
-
Manufactured by NewTek Sensor Solutionsbased in USA
The NewTek GA Series gage head sensors are spring-loaded AC LVDTs with excellent linearity, high sensitivity and infinite resolution. Construction consists of stainless steel probe assembly and 0.750 inch diameter hermetically sealed housing. Designed for a wide range of position measurement and dimensional gaging applications, they are available in ranges of ±0.50 inch (1.27mm) to ...
-
Manufactured by Freese Enterprises Inc.based in USA
Regardless of the industry or testing application, Freese Enterprises (FEI) always pledges the following points to our clients: Confidence and Integrity, Customer Satisfaction, Flexibility, High Quality Testing Equipment, Competitive Pricing, Proficient After-the-Sale ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you