Only show results in Connecticut? Ok

concrete thermal resistivity (Thermal Conductivity Monitoring) equipment

  • Model FlexGuard 250 - Environmental Coatings Product Line

    Flex-Guard 250 System is a unique, 100% solids, monolithic, solvent free, epoxy system designed to be applied over concrete walls and floors. Flex-Guard 250 System consists of a seal coat, polyester fabric and a topcoat of Flex-Guard 250 System, which when applied to walls or floors, will form a resilient, monolithic surface. Due to the resiliency ...

    By Environmental Coatings LLC based in Mesa, ARIZONA (USA).

  • Aquron - Model 3000-CBP - Concrete Preservation Treatment

    Aquron 3000-CBP is a permanent clear treatments /preservative/sealant solution for concrete block, split face concrete block and other large volume porosity concrete product. Aquron 3000-CBP is a highly reactive catalytic agent that reacts with free alkali and/or alkaline hydrates by internally producing a silica hydro-gel, which fills the pore ...

    By Aquron Corporation based in Rockwall, TEXAS (USA). from Masonry and Stone Enhancement Product line

  • NovoRez - Model 351 - Concrete Coating and Acid Resistant

    NovoRez 351 is a 100% solids, multi-functional, two component polymer coating suited for concrete substrates in aggressive chemical environments. The coating combines and epoxy Novolac resin with a special “stress-relieving” additive to provide maximum durability and superior concrete compatibility.

    By PolySpec - ITW Polymers Sealants North America based in Irving, TEXAS (USA). from NovoRez Product line

  • Model BKU I - Lining Systems

    The BKU system consists of the standardised material PVC hard. The lining profiles have a width of 314mm and can be produced in any required length. They are connected using clip rails with an in-built elastomer sealing profile. Drop-shaped webs are fixed to the back of the profiles which solidly anchor into the building component already during ...

    By BKU Beton-Korrosionsschutz GmbH based in Lampertheim, GERMANY.

  • Allied - Model AFT-300 Series - Foam Coatings

    AFT-300 series of products provide foam coatings with required flow characteristics and film forming properties. Water resistance and stiffness of the AFT-300 based foams make them ideal as an effective landfill cover and for odor control. Fired ceramic foams from AFT-300 maintain fine pore size, excellent mechanical strengths and thermal shock ...

    By Allied Foam Tech Corp. based in Montgomeryville, PENNSYLVANIA (USA).

  • THIOKOL - Model FEC 2234 - Concrete & Steel Coating/Membrane, Flexible Epoxy

    THIOKOL FEC 2234 is a multi-functional, 100% solids, two-component, polysulfide enhanced epoxy coating and membrane sealant suited for use on concrete and steel in primary and secondary containment applications. Its flexibility and ease of application also make it ideal for use as a crack-sealing coating.

    By PolySpec - ITW Polymers Sealants North America based in Irving, TEXAS (USA). from THIOKOL Product line

  • Model 120 - Sewer Shield Cote

    Sewer Shield® Cote is a 100% solids, USDA APPROVED, solvent free, low odor, epoxy coating system, impervious to a wide variety of acids, solvents, caustic solutions, oils, grease and many other chemicals. Sewer Shield® Cote is specially formulated in various setting times and with virtually no odor, making it the ideal protection system ...

    By Environmental Coatings LLC based in Mesa, ARIZONA (USA).

  • A3 - Disc Filters

    The A3-USA disc filter is one of the most advanced and cost-effective tertiary filtration disc filters on the market today. Influent is fed by gravity into the center drum and passes through the stainless steel filter discs. The filtered effluent passes into a tank. As the solids levels rise in the discs, high pressure nozzles engage to provide ...

    By A3-USA, Inc. based in Chinquapin, NORTH CAROLINA (USA). from Treatment Plant Equipment - Disc Filters Product line

  • Sewer Shield - Model 100 - Trowelable Wastewater and Containment Acid Protection Lining Systems

    Sewer Shield 100 is our pride and joy. This was the first coating we engineered ourselves back in 1997. Recognizing where typical industry coatings were failing with only a 30% resistance, we knew we needed a solution that could withstand the hot Phoenix Valley underground environments. So we researched, engineered, and began to manufacture ...

    By Environmental Coatings LLC based in Mesa, ARIZONA (USA).

  • Ceramic Polymer’s Coating Systems

    The Ceramic Polymer GmbH produces high-performance coatings with integrated micro ceramic particles for different fields of  application. The properties of the ceramic – chemical resistance, abrasion resistance and weathering stability– justify the high quality of our coating systems. By extra integration of microscopic special ...

    By Ceramic Polymer GmbH based in Roedinghausen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you