Thermal Conductivity Monitoring Equipment For Monitoring And Testing In Australia
-
Manufactured by Elementar Analysensysteme GmbHbased in GERMANY
Using more than one hundred years experience in elemental analysis in close contact with today's users of our instruments the vario EL cube was developed for a growing and changing demand in the 21st century. Designed as the successor of the most successful elemental analyzer, vario EL III, the vario EL cube is again the most versatile instrument in CHNS+O+Cl analysis. Based on the 'cube' ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The HFP01SC, manufactured by Hukseflux, measures soil heat flux—typically for energy-balance or Bowen-ratio flux systems. It is intended for applications requiring the highest possible degree of measurement accuracy. The HFP01SC outputs a voltage signal that is proportional to the heat flux of the surrounding medium. At least two sensors are required for each site to provide spatial ...
-
Manufactured by Elementar Analysensysteme GmbHbased in GERMANY
Experience nitrogen and protein analysis with increased laboratory efficiency. The rapid MAX N exceed nitrogen and protein analyzer operates according to the safe, simple, and eco-friendly Dumas combustion method and offers fast and cost-effective nitrogen and protein determination in just five minutes. Designed for unattended 24/7 operation, the analyzer addresses the needs of any ...
-
Manufactured by Texcel Pty Ltdbased in AUSTRALIA
The popular EAGLE 2 portable gas detector is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. The EAGLE 2 portable gas detector is equipped with features that are not available on competitive ...
-
Manufactured by Elementar Analysensysteme GmbHbased in GERMANY
Meet the workhorse in elemental analysis: the UNICUBE, designed for simultaneous carbon, hydrogen, nitrogen, and sulfur analysis in solid and liquid samples, ranging from 0.1 mg chemical substance to 15 mg of liquid fuel to 1 g of inhomogeneous soil. This elemental analyzer combines the low operating costs and the high sensitivity of a micro elemental analyzer with the dynamic measurement range ...
-
Manufactured by Consilium Marine & Safety Canadabased in CANADA
The ST650 EX is an all-round gas detector which functions well under the most difficult circumstances. The sensor is available in various versions, such as a catalytic flammable gas sensor, Infrared (NDIR) and a Thermal Conductivity sensor (TCD). The sensor has a long life-span, which achieves an optimal cost of ownership. (5150215-00A) ST 650EX NDIR PROPANE (C3H8) 0-100%LEL Aluminium ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The specialist for leak detection with tracer gas and hydrogen. The VARIOTEC 460 Tracergas was developed especially for leak detection on underground pipes by using tracer gas. It is characterised by an outstanding price to performance ...
-
Manufactured by Teledyne Hastings Instrumentsbased in USA
Teledyne Hastings, manufacturer of the original DV-4, DV-5, and DV-6 thermocouple vacuum gauge tubes, produces vacuum measurement equipment with exceptional stability, accuracy, and reliability under the most demanding conditions. The Teledyne Hastings’ DV-5 series thermocouple vacuum gauge tube/sensor can be paired with a variety of meters or controllers in the DV series to provide ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 301-C PGCs are flexible and versatile Analyzers that are in their fourth generation. The addition of these new Analyzers greatly improves the capability and range of Process Analyzers from ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
When you need to check for leaks from your Gas Chromatograph or Gas Analyser, then the Model 21-072 Mini Gas Leak Detector will provide you with the solution. Designed with a micro thermistor TCD, any gas which has a thermal conductivity different to air, will be ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The GasCheck handheld helium gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels. Designed for the search and location of gas leaks, the GasCheck handheld helium gas leak detector provides you with effective ...
-
Manufactured by Teledyne Hastings Instrumentsbased in USA
Teledyne Hastings, manufacturer of the original DV-4, DV-5, and DV-6 thermocouple vacuum gauge tubes, produces vacuum measurement equipment with exceptional stability, accuracy, and reliability under the most demanding ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
AGC Thermistor detector elements have the same mounts as the Hot Wire Filaments. The Thermistor is a thermally sensitive resistor that has a high negative co-efficient of resistance. They are manufactured from a mixture of the oxides of Manganese, Nickel and Cobalt. They are sintered in an oxidising atmosphere in the form of small beads (0.012' dia.). A covering of glass is then placed over the ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
This gas leak detector provides rapid and sensitive detection of a wide range of gases including Helium, Refrigerants and ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HVTT high vacuum turbo-molecular tube furnaces are available in three standard sizes. A range of tube lengths and diameters is available. The HVTT high vacuum tube furnaces at 1500 °C are available with two work tube diameters. These high vacuum furnaces are often the starting point for additional customisation such as automated control of gate valves, gas purge, back-fill systems and ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The AGC Model 75-802 Carrier Gas Purifier ensures a stable supply of purified gas for efficiency and costeffectiveness in gas chromatography systems. The original version of this refined instrument is the Bench Mount Purifier from AGC Instruments which is easily integrated with new or existing set-ups to work in tandem with numerous applications. This configuration links seamlessly with the AGC ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Housed in an explosion-proof package, the 932 is a multi-component ultraviolet (UV) photometric gas analyzer which measures up to five gas species at the same time. Hydrogen sulfide (H2S) and sulfur dioxide (SO2) are the primary measured components. The analyzer can also be configured to measure carbonyl sulfide (COS) and/or carbon disulfide ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 322 provides analytical capabilities unmatched by any other compact GC. The Model 322 dual-detector capability combined with its isothermal or temperature programmed oven, choice of injectors, and the ability to accommodate packed or capillary columns provides exceptional stability and flexibility for a wide range of environmental, laboratory, and mobile lab ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Adapted from our 931/932 ultraviolet (UV) analyzer platform, the 934 sensor-specific analyzer measures hydrogen (H2) in tail gas treating unit (TGTU) applications when hydrogen sulfide (H2S) measurements are not needed. With a rugged, low-maintenance design and minimal calibration drift, the analyzer uses a thermal conductivity detector (TCD) to deliver accurate H2 measurements while requiring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you