Thermal Test Chambers Equipment For Monitoring And Testing Available In Europe
-
PremiumManufactured by Aralabbased in PORTUGAL
The thermal shock chamber – fitoterm 150 cte2 – is composed of two independent chambers (hot/cold) in the same structure, allowing the test objects to be exposed to ultra-fast temperature changes through an internal elevator that conducts the objects between the two chambers ...
-
Manufactured by Tenney Environmental - a brand by Thermal Product Solutionsbased in USA
The Tenney Thermal Shock Test Chamber is designed for the safe, efficient, and accurate environmental testing of electronics and consumer products, and aerospace, telecommunications, and military and defense components. Non-hazardous, non-flammable, non-volatile materials ...
-
Manufactured by BOTO Group Ltd.based in CHINA
Corresponding Standard: GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM D1735 EIA - 364-59 IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA - 364-31C ...
-
Manufactured by CTS GmbHbased in GERMANY
The innovative technology of our CTS temperature shock test cabinets allow temperature changes up to 100 K/min. The most common national and international standards (DIN, IEC, MIL) are met. The compressed-air dryer system used as a standard allows up to 3000 test cycles without ...
-
Manufactured by ChiuVention Instrument Ltdbased in CHINA
Cold and heat impact tester use: temperature impact tester use: electronic and electrical components, metals, chemical materials, automation parts, communication components, defense industry, aerospace industry, BGA, PCB substrates, electronic chip IC, semiconductor ceramics and polymer materials, the ideal test tool for physical changes. This tester is ideal for testing the physical changes of ...
-
Manufactured by Thermotron Industriesbased in USA
Thermotron thermal shock chambers are controlled by the 8825 Controller. This climatic chamber controller allows for flexibility and versatility during thermal shock and temperature cycling profile operation. A 12” touchscreen displays the intuitive, Windows®-based operating system. The 8825 Controller allows temperature programs that utilize the chamber’s cold zone to operate as ...
-
Manufactured by Cincinnati Sub-Zerobased in USA
VTS Compact Thermal Shock Chambers consist of two separately controlled hot and cold zones with product being transferred between these zones for rapid product temperature changes. These thermal shock chambers are available with 1 or 3 cu. ft. (30 or 85 liters) of interior workspace volume, ideal for testing to find product flaws in small components/assemblies before they reach your customer. ...
-
Manufactured by ASLI(China) Test Equipment Co.,Ltdbased in CHINA
Programmable Heat Cold Impact Temperature Cycling Thermal Shock Testing Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changesbetween extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from ...
-
Manufactured by ChiuVention Instrument Ltdbased in CHINA
The Temperature Shock Test Chamber-Two Zone is used for testing physical changes in electronic components, metals, chemical materials, and more. It features USB disk recording, energy-saving refrigerant control, and temperature synchronization slope control. The chamber uses a balance temperature control system and meets various test standards. It has two zones for high and low-temperature ...
-
Manufactured by inTEST Thermal Solutionsbased in USA
Thermal Test Chambers for rapid, precise, and extreme temperature control. Our test chambers are configured to meet your specific application. They can be configured with the exact dimensions, interior access, and temperature ranges to meet your exact needs. ...
-
Manufactured by Zhongzhi Testing Instruments Co., Ltd.based in CHINA
This series of chamber is one of the most commonly used equipment in various baking and aging experiments. It is suitable for electronic instruments, materials, electricians, vehicles, metals, electronic products, and various electronic components to test their performance indicators and quality management under the temperature ...
-
Manufactured by KOMEG Technology Industrial Co., Ltd.based in CHINA
Thermal shock testing exposes products to alternating low and high temperatures to accelerate failures caused by temperature cycles or thermal shocks during normal use. The transition between temperature extremes occurs very rapidly, greater than 15 ...
-
Manufactured by Espec North America, Inc.based in USA
Qualmark HALT testing systems (Highly Accelerated Life Test) combine extreme temperature cycling and repetitive-shock/vibration for the ultimate in accelerated reliability ...
-
Manufactured by KOMEG Technology Industrial Co., Ltd.based in CHINA
Two-zone thermal shock test chamber is equipped with a hot and a cold dual zone with individual chamber control. It provides a thermal shock range from (-80 ℃ to 200 ℃). Thermal shock testing also called temperature shock testing or temperature cycling exposes products toalternating low and high air temperatures to accelerate failures caused by repeated ...
-
Manufactured by Espec North America, Inc.based in USA
Did you think that getting a thermal shock chamber was too expensive, required special utilities, and half your lab-space? The TSE-12 thermal shock chamber is the solution. Only 26 inches wide, the TSE-12 transfers product loads between cold and hot zones with a temperature range of -65°C to 200°C. ...
-
Manufactured by Espec North America, Inc.based in USA
Traditional three-zone thermal shock chambers can be quite large, as three separate chambers are used. The TSA series has just one chamber, substantially reducing its size. Instead, it circulates cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the setpoint, allowing quicker recovery of the desired condition after ...
-
Manufactured by Xian LIB Environmental Simulation Industrybased in CHINA
LIB 2-zone hot cold thermal shock test chamber is available in small capacity and large capacity to meet different testing requirements. Test can be performed during thermal shock testing from -70 to +200°C. The specimen automatic transferred from cold chamber to hot chamber by basket. The basket slides vertically and smoothly through rails, to make the specimen is exposed to the two ...
-
Manufactured by Scientific Climate Systems (SCS)based in USA
Since 1967, Scientific Climate Systems has been the industry leader in designing and building walk-in temperature chambers for many applications including testing components, products and assemblies. SCS temperature chambers and thermal shock testing chambers are used for testing and controlled storage for many industries including pharmaceutical, electronics, automotive and many more. With a ...
-
Manufactured by Wuxi Enviclone Test Equipment Co., Ltd.based in CHINA
The two-zones explosion-proof high and low temperature battery test chamber is composed of refrigeration system, heating system, control system, forced internal circulation system, smoke exhaust box, explosion-proof system and other parts. It is used to test lithium-ion battery’s performance and reliability during extreme hot and cold environment. ...
-
Manufactured by BOTO Group Ltd.based in CHINA
CHAMBER DESIGN FEATURES 1.High performance and quiet operation (68 dBA) 2.Space-saving designed for flush installation to wall 3.Full thermal break around doorframe 4.One 50mm diameter cable port o left, with flexible silicone plug 5.Accurate wet/dry-bulb humidity measurement system for easy ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you