Thickness Monitoring Manufacturers, Suppliers & Companies (Monitoring And Testing) Near Newfoundland
-
Manufacturerbased in Hackettstown, NEW JERSEY (USA)
For over fifty years Rudolph Research has dedicated itself to manufacturing quality instruments and providing superior technical and service support. With over 5000 laboratory instruments installed worldwide and many of them still in operation ...
DigiPol - Model AP-07 - Computer Controlled Polariscope
The AP-07 Polariscope is a computer controlled device designed for automatic stress measurement in solid and hollow ax symmetric glass products (drinking glasses, bottles, neck tubes of CRT bulbs, lamps, optical fiber preforms, etc.). It permits ...
CONTACT SUPPLIER -
Manufacturerbased in Upper Saddle River, NEW JERSEY (USA)
PHASE II IS A LEADING MANUFACTURER OF Hardness testers, portable hardness testers, surface roughness testers, ultrasonic thickness gauges, coating thickness gauges, durometers, vibration meters and force gauge within our material testing instrument ...
Phase II - Model PHT-6000 Series - Ultrasonic Portable Hardness Tester
Latest portable hardness tester technology. Utilizes both ultrasonic and dynamic type portable hardness testers in one unit. Can test non-destructive and handle small or thin work parts down to 2mm of thickness, as well as testing large parts. ...
CONTACT SUPPLIER -
ManufacturerOffice in Union, NEW JERSEY (USA)
Tritex NDT has grown to be one of the leading manufacturers of ultrasonic thickness gauges worldwide. Our experienced technicians pioneered multiple echo into hand-held ultrasonic thickness gauges in the 1980’s. We understand the problems faced by ...
Multigauge - Model 5300 GRP - Thickness Gauge
Designed to check the condition of Glass Reinforced Plastic (GRP) or Engineering Plastics. It can also be used on uncoated ...
CONTACT SUPPLIER -
Manufacturerbased in Pottstown, PENNSYLVANIA (USA)
VideoRay is a global leader in Underwater ROVs (Remotely Operated Vehicles) technology. Established in 1999, VideoRay has worked with technology and mission partners throughout the world to develop and prove the small ROV tool for a wide range of ...
VideoRay - Model Pro 4 - Ultra Base Remotely Operated Vehicle (ROV) System
The Pro 4 Ultra ROV system is a simpler, lighter version of our standard Pro 4 ROV system. The extremely portable Pro 4 Ultra control panel is about 40% lighter than the standard Pro 4 Control Panel weighing in at 8.4 kg (18.5 lbs). The Ultra system ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
As a full-service supplier in the field of surface testing, Fischer has been developing instruments for non-destructive material analysis, coating thickness measurement and material testing since 1953. We offer a wide range of measuring devices for ...
FISCHERSCOPE - Model X-RAY XAN - XRF Analyzer
Like the XUL series, the XRF instrument spectrometer FISCHERSCOPE X-RAY XAN are ideally suited for analyzing simply shaped samples. However, a great advantage of the XAN series lies in their high-quality semiconductor detectors. And X-ray ...
CONTACT SUPPLIER -
Manufacturerbased in Glenside, PENNSYLVANIA (USA)
Solar Light is recognized worldwide as a manufacturer of precision ultraviolet light sources, solar simulators, and radiometers for almost 50 years. Our standard line of UV, visible, and IR radiometers and light meters measure laboratory, ...
-
Training providerbased in West Chester, PENNSYLVANIA (USA)
NDT International, Inc provides Non-destructive testing equipment and professional services to help companies like yours apply state of the art quality control inspection, preventive maintenance, Ultrasonic testers, and their many accessories. Call ...
NDT - Model DFX-7 Series - Flaw Detector
Size: 2.5W x 6.5H x 1.24D in (63.5 x 165 x 31.5mm). Weight: 14 ounces (.397kgs), with batteries. Case: Extruded aluminum body with nickel plated aluminum end caps (gasket sealed). Display: 1/4 VGA AMOLED color display (320 x 240 pixels). Viewable ...
CONTACT SUPPLIER -
Manufacturerbased in Holbrook, NEW YORK (USA)
Calmetrics Inc was founded in November, 2002 as a supplier of coating thickness and material composition standards, as well as analytical laboratory services. The principle members of Calmetrics Inc. each began their careers with the original UPA ...
Single Layer Foils
These are high purity, in almost all cases, single element films consisting of one layer, which can be placed over any blank substrate for XRF calibration. Due to their inherently fragile nature, all foils 1 micron and less are metal films are ...
CONTACT SUPPLIER -
Manufacturerbased in Rochester, NEW YORK (USA)
Leaders in Fast, Accurate, Scalable Non-Contact Thickness Measurement Technology + Analysis. The Lumetrics story began in 2003 in Rochester, NY, when John Hart and his fellow scientists and engineers developed the original OptiGauge—a high-precision ...
Model Optigauge 600 - Absolute Thickness Measurement from 100 Microns to 16 mm
The OG-600 instrument is based on time-domain low-coherence interferometry. This technology enables absolute thickness measurement of any material, which is transparent or partially transparent to the measurement of light. The ...
CONTACT SUPPLIER -
ManufacturerOffice in Annapolis, MARYLAND (USA)
Cygnus pioneered the digital Multiple-Echo technique. This technique has long since been the industry standard for through coating measurement of material thickness. Driven by the need for a hand-held device, we successfully developed Multiple-Echo ...
Cygnus - Single Crystal Ultrasonic Probes
Cygnus single crystal probes are for use with the gauge in Multiple-Echo mode to read through and ignore coatings. These have one piezo-ceramic crystal. This crystal both sends and receives the ultrasound energy. The S2C single crystal 2.25 MHz 13 ...
CONTACT SUPPLIER -
Manufacturerbased in Rockville, MARYLAND (USA)
OKOndt GROUPâ„¢ represents a group of companies with more than 25 years of experience in the research, development, and manufacture of NDT products. Our industrial clients around the world are committed to ensure the highest levels of operational ...
Sonocon - Model BL - Portable Ultrasonic Flaw Detector
Sonocon BL belongs to the latest generation of portable UT instruments. Using high-end electronics and having the richest set of modes and software features, it can solve any task that can be sold with portable ...
CONTACT SUPPLIER -
Manufacturerbased in Southborough, MASSACHUSETTS (USA)
Semiconsoft, Inc was founded in 2001 with the mission to make data analysis of thin film thickness measurement and n&k easy and transparent to users. TFCompanion software enabled engineers to import ellipsometry, reflectance, transmittance and ...
Semiconsoft MProbe - Model NIR - Thin Film Measurement System
Spectroscopic Reflectance and/or Transmittance measurement in NIR (900nm -1700nm) allows to analyze applications that are optically opaque at visible or UV wavelengths. Solar cells absorbers (e.g. CIGS, CdTe), rough surface interfaces, other light ...
CONTACT SUPPLIER -
ManufacturerOffice in Boston, MASSACHUSETTS (USA)
QUANTUM is well-known organization consist group of professionals, each having several years of experience in the field of analytical, scientific, process and test & measuring instrumentation. In late 1994, the firm enlarged under specialized ...
Quantum - Services
Quantum Equipment provides exclusive services for XRF analyzers optimized for jewellery alloys & precious metals manufactured by RoentgenanalytikSysteme GmbH & Co. KG and Bruker Nano GmbH. We do have ample stock of spares and consumables ...
CONTACT SUPPLIER -
Manufacturerbased in Ogdensburg, NEW YORK (USA)
DeFelsko Corporation, a leading U.S. Manufacturer of coating thickness gages and inspection instruments, has been delivering Simple, Durable and Accurate gages since 1965. Family owned and operated in Northern New York, their state of the art ...
PosiTector - Inspection Kits
PosiTector Inspection Kits contain a PosiTector gage body (Standard or Advanced) with 3 probes – coating thickness, environmental and surface profile – and accessories in a convenient hard shell carrying ...
CONTACT SUPPLIER -
Manufacturerbased in Danvers, MASSACHUSETTS (USA)
Danatronics Corporation is a high technology company specializing in the field of Non-Destructive Testing (NDT). Danatronics combines the experience of more than 75 years of NDT know-how in the areas of Ultrasonic transducers, thickness gages and ...
Danatronics - Model MTG-99 - Magnetic Thickness Gages
The MTG-99 is simple to use to non-destructively measure the thickness of any non-ferrous material up to 1” with access to both sides. The MTG-99 is portable, battery operated, can change color and vibrate on alarm, has an internal datalogger ...
CONTACT SUPPLIER -
Manufacturerbased in Pittsburgh, PENNSYLVANIA (USA)
Cianflone Scientific, founded in 1984 by Robert Cianflone, played a significant role in developing the technology to provide portable elemental analysis capabilities using WDXRF technology. Since 1984, Cianflone products have provided precise ...
PortaSpec - Model Series X - Multi-Element Sequential Analysis
PortaSpec® 2501 Series X is capable of performing multi-element sequential analysis in the range of Ti to U and is ideal for measuring coating weights of both chrome and titanium pretreatment. Cianflone’s PortaSpec 2501 Series X is similar ...
CONTACT SUPPLIER -
Technologybased in Toronto, ONTARIO (CANADA)
Introducing the Skygauge, the unmanned system designed for both visual and wall thickness inspection. Using the Skygauge, workers stay on the ground while the drone performs inspections in hazardous ...
-
Manufacturerbased in Dollard-Des-Ormeaux, QUEBEC (CANADA)
Novacam Technologies Inc. designs and manufactures non-contact high-precision 3D metrology systems for applications in industry and bio-medicine. Novacam systems are based on low-coherence interferometry (LCI) and feature fiber-based non-contact ...
Microcam - Model 3D/4D Interferometer - High-Precision Non-Contact Surface & Thickness Measurements
As a core component of any NOVACAMTM 3D metrology system, the MICROCAMTM-3D/4D interferometer provides light source to optical scanning probes and carries out the optical and electronic processing of measurements. Novacam interferometers MICROCAM-3D ...
CONTACT SUPPLIER -
Manufacturerbased in Warren, MICHIGAN (USA)
For more than sixty years Elcometer has been a world leader in the design, manufacture and supply of inspection equipment to the coatings industry. Ever since the first Elcometer gauge was manufactured in 1947, our philosophy has been to provide ...
Elcometer - Model YKIT-PROTECTIVE-1E - Elcometer Protective Coatings Inspection Kit 1 | Imperial
An entry level inspection kit containing profile, climate, wet and dry film thickness. The Elcometer 456 coating thickness gauge connects to Elcomaster™ Data Management Software for paperless quality ...
CONTACT SUPPLIER -
ManufacturerOffice in Sterling Heights, MICHIGAN (USA)
Endura Coatings has been the acknowledged leader in coating application services since 1970. We provide coatings for the world's most important tooling and manufactured products, everyday. As an industrial coatings manufacturer, Endura coats ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you